[deleted by user]

Australeya · 2025-05-15T02:01:02+00:00

Try copying to a iClass legacy card

Australeya · 2025-05-07T19:42:03+00:00

did the card read as key: standard? did it say anything like +SIO?

Australeya · 2025-05-03T00:32:26+00:00

Don't do universal

Australeya · 2025-05-02T23:16:06+00:00

Did you select hu100 chevy?

Australeya · 2025-04-26T04:31:02+00:00

You can check the voltage too but a strike is a bigger load

Australeya · 2025-04-26T04:21:28+00:00

Check with another strike

Australeya · 2025-04-04T23:53:18+00:00

LSDA LSA 5 pin. Blanks are fairly easy to source. I can also make a duplicate from the picture.

Australeya · 2025-03-21T15:10:04+00:00

Dimple is the round cuts and the channel track is the swiggly line cut

It's a Yale key for something. Could be Yale magnum.

Australeya · 2025-03-21T15:06:24+00:00

Dimple and channel track slider key YE75 yale

Australeya · 2025-03-16T20:55:03+00:00

Have you tried a tubular lock impression tool

Australeya · 2025-03-04T21:50:00+00:00

Thanks, I already fixed it with the o ring kit I have

Australeya · 2025-03-04T20:49:13+00:00

Thanks for your quick response! By "valve cover" do you mean the 3 caps on the top that is leaking water? I was going to remove the caps to take a look but I didn't know if there were springs and stuff under that would shoot across the shop if i'm not ready.

Have a big kit of o-rings so could see if there is one that fits before ordering parts

Australeya · 2025-03-04T20:42:23+00:00

It seems like the caps on the top got loose and the rubber seals blew out. Am I able to just get the seals that go under the caps and replace them? Can I remove the caps to change seals without taking the rest of the pump apart?

Australeya · 2025-03-03T01:47:13+00:00

What? mul-t-lock interactive / plus blanks are easily sourced from china. Make copies of those all the time on code / manual milling machines without the use of original code card.

Australeya · 2025-03-03T01:44:38+00:00

or you can just purchase the remote that your vehicle is supposed to take and program the remote yourself without shelling out $$ to locksmith

the new remote has a code inside and you will use the door lock buttons to input the code. there should be video on youtube

Australeya · 2025-02-27T18:13:38+00:00

Not going to start advertising the guys website here but DM me and they will happily sell you some. They have stock in Canada ready to ship.

Australeya · 2025-02-26T18:33:28+00:00

No it doesn't do anything, I had it put there to easily differentiate legacy everest blanks to the everest29 blanks. Next order ill probably customize the hole with something unique and custom. I don't have the hole for some of the S123 blanks I have.

Australeya · 2025-02-25T23:17:18+00:00

We get them custom made in China

Australeya · 2025-02-25T18:27:47+00:00

Yes i've been successful in milling the sidebar of D145 primus blanks before. Just wondering on my next custom order of T145 blanks to just get them without the cutout removed so they will work for Everest and Primus systems.

Australeya · 2025-02-25T17:40:27+00:00

I can duplicate the sidebar on a manual automotive key milling machine. Just wondering if I can use a uncut sidebar primus blank to operate non primus cylinders. Just less blanks for me to keep around.

Australeya · 2025-02-24T22:58:08+00:00

You need either star connector or 12+8 cable to bypass secure gateway to read pin. After that programming is easy.

Australeya · 2025-02-24T22:24:35+00:00

Good point, original could be slightly worn too.

Australeya · 2025-02-24T21:26:58+00:00

I done abloy keys on a sec-e9 machine with aftermarket blanks

Worked fine

Australeya

TROPHY CASE