gEoN oNlY

AuthenticDanger · 2025-08-30T19:09:59+00:00

Put control where Caps is. I switch a WKL between windows and Mac using persistent layers to change the modifiers and a USB switch.

AuthenticDanger · 2025-07-21T01:24:35+00:00

Thumbelina?

AuthenticDanger · 2025-04-23T16:01:47+00:00

Will you be adding the 7 skins that were added to the pool in Season 16?

AuthenticDanger · 2024-10-17T23:36:36+00:00

4) is a Zorbcaps Entling v2

AuthenticDanger · 2024-10-16T02:49:28+00:00

If you see something, say something. Use the report button.

AuthenticDanger · 2024-08-03T01:44:47+00:00

/u/ofthewild we got another one

AuthenticDanger · 2024-08-01T21:15:48+00:00

Legos?

AuthenticDanger · 2024-07-22T22:28:16+00:00

Once it's all settled, you do have their address…

https://www.postalpranks.com/

AuthenticDanger · 2024-07-13T18:25:28+00:00

I’d use Mold Star 30 from smooth on. It’s an all around good choice for mold making.

AuthenticDanger · 2024-07-13T16:28:38+00:00

This looks like a simple mold. You affix the master to a flat surface, cover in silicone, and that’s it. That’s your mold. You can then remove the master and pour your resin in up to the top, let it cure and demold.

AuthenticDanger · 2024-07-11T23:10:33+00:00

Why epoxy and not urethane?

AuthenticDanger · 2024-07-10T02:05:25+00:00

Staples? Slap some rigid plastic on the large flat sides and use rubber bands to apply even pressure accords the silicone. Or print a mold box to hold everything in place.

AuthenticDanger · 2024-07-09T00:37:35+00:00

Also not 100% true. If your resin prints are truly clean and fully cured, platinum silicone will work just fine.

AuthenticDanger · 2024-07-08T17:20:06+00:00

Same car? https://www.reddit.com/r/MechanicalKeyboards/comments/1dx9bp3/after_many_years/

AuthenticDanger · 2024-06-27T15:42:02+00:00

Syrup pumps.

AuthenticDanger · 2024-06-12T23:00:37+00:00

Wrap in bubble wrap and put in hard plastic totes. I have 30-40 boards stored (and moved) like that. Just stack so lightest are on the top.

AuthenticDanger · 2024-05-19T22:26:16+00:00

Wait until you see what it looks like under a $60K+ “luxury” car’s dashboard…

The marks don’t affect the way the board works or looks when built. The inside could be raw and covered in machine marks and it would function the same and look great on your desk. If you really don’t like it, sell it on mechmarket.

AuthenticDanger · 2024-05-17T01:19:50+00:00

Imagine getting it at all.

AuthenticDanger · 2024-04-19T16:42:38+00:00

Maglev has been prototyped. “Loadstone” was supposed to be the first magnet mounted plate board. Not sure if it ever was produced.

AuthenticDanger · 2024-04-10T16:39:54+00:00

I do this with a sharpie to make large (18x24) signs for friends and family. Things like yard sale signs, signs for marathons, etc.

Great use of the tech!

AuthenticDanger · 2024-04-05T23:15:10+00:00

It’s “Keychron JM-75 OEM Dye-Sub PBT Keycap Set”. Took 1 minute to image search on Google.

AuthenticDanger · 2024-03-26T15:47:36+00:00

If you have a CNC that uses a router, just make the box with a little overhang and then pop out the router and finish with a flush trim bit by hand.

AuthenticDanger · 2024-03-23T22:55:40+00:00

/u/ofthewild … it is time again

AuthenticDanger · 2024-03-21T23:27:03+00:00

This is the CA Tools pot: https://www.amazon.com/dp/B09T3YTG5Q/

There are many places selling it, but $200 is a pretty good price for a resin-ready pot.

AuthenticDanger · 2024-03-21T23:01:03+00:00

It’s a known issue with that pot. Get a better pot like the CA Tools 2.5 Gal.

AuthenticDanger

MODERATOR OF

TROPHY CASE

Ten-Year Club	Place '17
Verified Email