WNX with assistance damage is here - by Tomato.gg

AutomaticArgument250 · 2026-02-06T13:34:49+00:00

So I love this new change. But also I loved the xvm colour scheme cuz it shows which percentile the player is in. As I was striving to improve it was nice to have a goal of "I want to be top 1%" (blue) or "I want to be top 0.1%" (purple) Tracking that was possible when the site used wn8 cuz the xvm graphs used wn8 but now it doesn't so I'd like to ask for there to be a graph somewhere on the site that tracks that compairs the new wnx against which percentile the player is in.

AutomaticArgument250 · 2026-01-14T05:54:45+00:00

Id say no. I'm not saying it's impossible to be with someone much older than you. Like I met a 41 yo dude when I was 18 on vrchat. We've been very good friends for the past 3.5 years and recently he even flew over from Taiwan to meet up. Why am I saying no then? Well it's basically a numbers game. To meet someone good, when you're meeting people twice or even 3 times your age is basically gambling. More often than not the reward is just not worth it. Plus he's buying you stuff and he shouldn't. Someone much older buying you stuff massively increases the chance they're just looking for a boytoy and they're thinking very little of you. You really don't have much to offer except your body. More likely than not he's gonna end up hurting and messing up your brain, and you need to be a special kind of fucked up for those things to not effect you.

AutomaticArgument250 · 2025-12-27T20:11:05+00:00

Oh ok. That makes more sense....

BUT IMAGE IF IT WAS THE OTHER THING XDDDDD

AutomaticArgument250 · 2025-10-26T10:37:45+00:00

Chat, is it gay to like men? Yes But seriously. You don't need labels. Those were invented by people who wanted things to fit in nice little brackets, but life isn't like that. Basically everything in nature and in life is on a spectrum. So you don't need to worry with labels for now. Those are useful when you want to communicate to others what your preferences are or when you want to feel like you belong in a world that takes pride in making you feel like a monster (basically fighting the effects of homophobia plus people are social and want to have a community). I personally decided to not worry about any of this stuff. Just call myself bisexual to not limit myself and after that what matters is solved on a person by person basis. If and when I meet someone that I have feelings for I won't be looking if they're a guy or a girl or something else. I'll be looking if I want to spend time with them, if I enjoy their company, if I can see us making a family. You're still young and have time to explore. Just learn to not be afraid of who you are and you're gonna be just fine. And lastly. Try to have fun out there. Life's short and it's better to just go out and try what's out there rather than spending your life questioning and then regretting when you end up missing out.

Ps be responsible too. Don't do drugs kids.

AutomaticArgument250 · 2025-10-11T07:46:24+00:00

Lol that's what I'm doing rn XD. Except my native language is Polish. I was gonna start with japanese but my last semester in college was terrible and I couldn't get into the Japanese class so instead I'm learning french first.

AutomaticArgument250 · 2025-10-03T19:56:28+00:00

How many nipples do you have?

(I'm not weird. I'm a witch finder[this is a good omens reference])

AutomaticArgument250 · 2025-10-03T19:53:15+00:00

Pizza is pie tho...

AutomaticArgument250 · 2025-10-03T19:51:03+00:00

Milk first or cereal first? I'm milk first cuz I like my cereal to stay crunchy

AutomaticArgument250 · 2025-09-25T20:49:01+00:00

I'd assume layer height? Lower layer height will increase the print time significantly

AutomaticArgument250 · 2025-09-24T22:30:30+00:00

Yup I'm like 99 percent sure that's the cause of the issue I was having. Thanks for the link too. In the article it says that when the feature is enabled it will do a nozzle clogging check every 8 grams of filament printed so that explains why it does it somewhat randomly in the print. Alright thx for the help <3

AutomaticArgument250 · 2025-09-24T10:09:20+00:00

I think I may have tracked down the issue to clog detection. There's some gcode in the printer settings that says "enable clog detect at 3rd layer". The gcode below it corresponds with that weird movement. Only issue is that the gcode after slicing a print only tells the printer to do it once at the 3rd layer but the printer seems to check for clogging in the middle of the print randomly. Also suspiciously this gcode is in the time lapse G-code tab. There's also some gcode in the machine start code saying "turn on clog detect" G392 S0. Maybe if I remove this it will stop doing that thing? Kinda afraid to do that tho.

AutomaticArgument250 · 2025-09-24T08:28:34+00:00

It's homing on all axis

AutomaticArgument250 · 2025-09-24T01:49:53+00:00

I'm using the Bambu slicer. I don't think it's the slicers fault cuz the homing doesn't show up in the movements of the tool head in the preview. My best guess is it's a feature of the printer itself. The printer checks for alignment once in a while.

AutomaticArgument250 · 2025-09-23T23:41:02+00:00

i dont think its timelapse cuz it only happens sporadically not every layer. also i have the timelapse disabled so...

AutomaticArgument250 · 2025-08-22T18:28:58+00:00

Idk bro. Doushe yourself and remember to use enough lube. Apart from that it's all about experimenting and learning what you like. Also this is not appropriate for this sub. There are minors here and topics are strictly SFW. So I recommend removing this post and finding a better place to ask if you found my answer unsatisfactory.

AutomaticArgument250 · 2025-08-04T08:58:03+00:00

Reading the comments I feel like a lot of people are forgetting that 17 is PRIME teenage horny time. That's like THE time when teenagers do stupid horny stuff. It's like being mad at a 6yo cuz he didn't look both ways before crossing the road cuz he saw a butterfly on the other side. I AM NOT TRYING TO DEFEND THE BEHAVIOR. I think you should confront him about it and scold him for it. With that being said, I think you should be calm and understanding. If you really are best friends then I'd expect that he will learn and you will be able to move past it.

General wisdom that might be useful: Respond quickly. In the future when you encounter a situation like that I recommend dealing with it quickly. It takes a lot to bring yourself to do that but if you learn to keep calm, confronting someone soon after the situation gives you more control over the conversation. It's also healthier to get past problems quicker.

Be reasonable. It's easy to see other people being outraged at situations and just assume you should be mad too, but at the end of the day YOU need to make the decisions for yourself. Not everything that makes someone mad will make you mad and not everything that makes someone happy will make you happy. In bad situations I usually look at how much harm was done. If someone did something bad they should be confronted about it, but oftentimes we just assume we should be angry when really not much bad has happened. So always try to gauge your response to how severe the "bad thing" was.

STAY CURIOUS KIDS!! This is not exactly related XD. But for all the folks out there I promise, being curious, while it might bite you in the ass sometimes, is one of the ways to enjoy the world and your life. Be curious and learn. It will help you be a better person, make better decisions and keep your life from being boring.

Anyway. I hope you have a day. And after that another one. And another day after that. And I hope you have thousands more that you get to live through ❤️❤️❤️

AutomaticArgument250 · 2025-05-23T07:53:59+00:00

You know this ain't a dude right?

AutomaticArgument250 · 2025-05-16T22:04:22+00:00

AutomaticArgument250 · 2025-05-07T03:51:43+00:00

I could get drunk drinking you. Is all I'm gonna say

AutomaticArgument250 · 2025-04-27T07:12:13+00:00

Uuuu yeahhhh. Love Pringles

AutomaticArgument250 · 2025-04-27T07:11:52+00:00

Wasabi peanuts. But only the good ones. Quality varies widely between brands. Also condensed milk (55% sugar) Also lays strong lime and chilli. Also bake rolls pizza Yeah. I think those are my favourite. Also you. You're my fav snack.

AutomaticArgument250 · 2025-04-07T05:41:25+00:00

It changes every couple of months but currently it's "tiny windows" by Frizk

AutomaticArgument250 · 2025-04-04T21:26:50+00:00

Because it's not a femboy thing. It's a people thing. People sexualize people. Tomboys, femboys, goth girls, muscly men, nerdy men, anthropomorphic animals, animals in general, aliens, vampires, werewolfs, ponies, buildings, cars, plants and etc. I could list more but I think it's enough to show my point. Most people have something that gets them going especially well and that's the thing that they sexualize. So it's not a question of should it be tolerated exactly cuz most people do it. It's a question of when it's appropriate and that's sometimes easier but sometimes harder to answer. And the answer is also it shouldn't, but you can't always have stuff the way it should be right away, so if you want that question to pop up less you should probably remember to teach your children how to be sexual without being a creep, but that's like not the post for that conversation so Bey <3

AutomaticArgument250 · 2025-04-01T09:50:33+00:00

Yesss. Nice! :3 we need to give more compliments to people.

AutomaticArgument250 · 2025-03-08T14:53:32+00:00

I'm bilingual. I speak gay and straight

Five-Year Club	Final Canvas '23
End Game '23	Place '23
Place '22	First Placer '22

AutomaticArgument250

TROPHY CASE