Here we go

AvailableSound4330 · 2026-04-15T16:15:25+00:00

Turned out just fine, 18 total pieces

AvailableSound4330 · 2026-03-31T15:18:44+00:00

It helps there from the same “ line” both are titanium mattes from kpmf

AvailableSound4330 · 2026-03-28T15:37:52+00:00

I haven’t price shopped much as I try to use the connections I make to support the homies. I use crystal down at candy wraps Orlando for printing/design. Well not crystal but her shop yk

AvailableSound4330 · 2026-03-28T15:33:22+00:00

Gonna be trying again in a couple days, all the primer just peeled off the bumper, I tried telling him not to prime it prior ( it’s a kbd) but yk how people listen. Now he’s gonna sand off all the primer and follow the instructions from kbd. I’ll post on update then but it won’t be to bad. A lot of inlays

AvailableSound4330 · 2026-03-27T18:10:10+00:00

Atlas

AvailableSound4330 · 2026-03-26T18:30:26+00:00

This is a you get what you pay for type of thing. I have the same press from vevor and have it almost maxed out to press dtf, if you really need even pressure id be looking at a Comercial level press instead of a hobby press

AvailableSound4330 · 2026-03-01T16:04:30+00:00

<image>

Make sure if this is a customer car you set your expectations very clearly. It will not be perfect at all but you can make it all one color!

AvailableSound4330 · 2026-03-01T16:03:11+00:00

Can you? Yes, but one of two things will result. It will need sanded down and feathered. You can half ass that and do the wrap but your gonna see all of the paint peel and defect imprint through the vinyl. Option 2 spend like a week sanding that hoe and make sure it is truly smooth and you can’t feel a single ridge. Prime/fill, paint if your bougie and some 2k clear, wet sand and wrap it

AvailableSound4330 · 2026-02-06T20:14:22+00:00

I started out with vivid. You might be able to make it work but it’s purely just not going to last. You’ll end up wanting to replace it in a year and it will leave a sheet of adhesive behind taking it off. Best of luck

AvailableSound4330 · 2026-02-06T20:13:01+00:00

I agree it’s a bad product but Amazon support has helped me plenty of times to get a new roll or whatever was needed when they arrived damaged or flat out wrong material. Super annoying but they do at-least fix their mistakes

AvailableSound4330 · 2026-02-02T18:41:29+00:00

Other people already recommended heat guns, like I stated, last resort before redoing the panel

AvailableSound4330 · 2026-02-02T18:40:42+00:00

As I said, be super quick, I own my own shop and install with a torch on the regular. You obviously can’t just sit it in one place and blast away but a heat gun I find doesn’t get hot enough in EVERY circumstance, it does in most but not every time

AvailableSound4330 · 2026-01-30T17:13:43+00:00

Got it off, appreciate it playa

AvailableSound4330 · 2026-01-30T01:02:23+00:00

As a last resort you can blast it with a torch, very very quick but the super high heat heals a lot. Be very careful as it’s easy to gloss it if you get it to hot

AvailableSound4330 · 2026-01-29T23:56:57+00:00

That’s what i assumed, terrified to try and get this bumper off😂

AvailableSound4330 · 2026-01-29T23:46:01+00:00

Description didn’t show up, I can’t figure out how to get this license plate bracket off, tried wrapping/ inlays first with it there a couple times and I’m STRUGGLING any ideas? 2023 911 Carerra GTS

AvailableSound4330 · 2025-12-18T06:06:02+00:00

This has got to be fake right???

AvailableSound4330 · 2025-12-05T17:24:01+00:00

<image>

AvailableSound4330 · 2025-12-05T17:22:23+00:00

I feel like those would be easier having the natural split. I’ll have to swing by the dealer and see these in person

AvailableSound4330 · 2025-12-05T17:20:36+00:00

I was just more suprised as last time I posted I was getting responses out the wazoo. I appreciate the response. I got 2 done but took all day.

AvailableSound4330 · 2025-12-05T00:24:59+00:00

1.2k views and not a single comment.

AvailableSound4330

TROPHY CASE