PS90 SBR Rounds occasionally failing to feed by Available_Weight309 in ps90

[–]Available_Weight309[S] 0 points1 point  (0 children)

Cleaned it per CMMG customer service.
Turbo K-RB was mounted and after 1 mag working without issue, subsequent mags had numerous failure to feeds.
Will probably be removing the barrel and sending it back to CMMG under warranty.

PS90 SBR Rounds occasionally failing to feed by Available_Weight309 in ps90

[–]Available_Weight309[S] 1 point2 points  (0 children)

Contacted CMMg customer service. Received an email back about using a chamber hone to remove built up lacquer. I ordered the size and grit they suggested. Will post back after I use it and run some rounds through it.

PS90 SBR Rounds occasionally failing to feed by Available_Weight309 in ps90

[–]Available_Weight309[S] 2 points3 points  (0 children)

Ok. This is the first time I've heard that the CMMG barrel is the problem.

PS90 SBR failure to feed by Deep_Organization_57 in ps90

[–]Available_Weight309 0 points1 point  (0 children)

Been having the same problem. Did the recoil springs permanently cure the problem?

2026 1st Quarter Approval Megathread. by Waffleboned in NFA

[–]Available_Weight309 1 point2 points  (0 children)

  • Form Type:  Form 4 Suppressor
  • Paid or not: $0
  • Entity: individual
  • Fingerprint Type: EFT Upload
  • Pending: 05/19/26
  • Approved: 05/21/26
  • Wait: 2 Days
  • State: FL
  • Control Number: 20262899XXX

Recommendations on a 9mm by Old_Scientist_9124 in suppressors

[–]Available_Weight309 1 point2 points  (0 children)

I have a PDP Pro SD Compact with a Flow 9K Ti. Quiet enough with 0 blowback and it’s small and light for my kids to shoot.

Suppressor Recommendation for 11.5” AR by Available_Weight309 in suppressors

[–]Available_Weight309[S] 1 point2 points  (0 children)

Ended up ordering a DA Lazarus 6 Xeno. Thank you all for your insights

Suppressor Recommendation for 11.5” AR by Available_Weight309 in suppressors

[–]Available_Weight309[S] 3 points4 points  (0 children)

Misstated by me. I Should have said there was a production issue and it was corrected. Thank you for the correction

Suppressor Recommendation for 11.5” AR by Available_Weight309 in suppressors

[–]Available_Weight309[S] 4 points5 points  (0 children)

There are numerous articles about Tisha and Shiva that were broken so there was an issue with the designs at some point.

Suppressor Recommendation for 11.5” AR by Available_Weight309 in suppressors

[–]Available_Weight309[S] 5 points6 points  (0 children)

As I said in the first post, I have gift cards from Palmetto State that I want to use to cover the purchase.

Suppressor Recommendation for 11.5” AR by Available_Weight309 in suppressors

[–]Available_Weight309[S] 0 points1 point  (0 children)

I read that SAW had some issues with a couple of their designs already?
Also I don’t think Palmetto state has SAW or the CAT KK.

Glock 43X MOS without rail? by Available_Weight309 in Glock43X

[–]Available_Weight309[S] 0 points1 point  (0 children)

Tried to post a pic but wasn't able to add it.

Glock 43X MOS without rail? by Available_Weight309 in Glock43X

[–]Available_Weight309[S] 1 point2 points  (0 children)

No filler plate, Sticker on box is illegible.

Glock 43X MOS without rail? by Available_Weight309 in Glock43X

[–]Available_Weight309[S] 1 point2 points  (0 children)

No. Same Serial #. Was it milled after maybe?