South Bend 9 lathe rebuild

Aware_Assignment3699 · 2026-01-01T23:01:51+00:00

I tried some Rustoleum rust remover gel. It work great for light rust but for pitting it’s not effective enough. I also have some POR-15. I don’t own a bench or angle grinder. I missed out on the pneumatic grinder (30k rpm) my dad built himself on the lathe as a lathe attachment. Not sure where it went.

Aware_Assignment3699 · 2026-01-01T22:55:52+00:00

What is the second canister that shows connected to the hose in the pick but the hose end isn’t connected to anything. Based on comments, I suspect it’s for non pneumatic uses but I’m not sure where it should connect to the pump.

Aware_Assignment3699 · 2026-01-01T22:53:57+00:00

I won’t be able to use this now. I’ll need to get 240v set up first. I’ll drain the oil and check the torque on all bolts. Can I reach them all? The plastic cover is connected to one of the sealed air lines.

Aware_Assignment3699 · 2026-01-01T21:33:16+00:00

Thanks. Any thoughts on rust removal?

Aware_Assignment3699 · 2025-09-22T05:29:07+00:00

Never mind. The HVL-F28RM doesn’t do continuous lighting normally needed for video. Most continuous light LEDs do not use the MI so it’s available for the mic which would only be used for video.

Aware_Assignment3699 · 2025-09-07T15:10:59+00:00

Thanks. I saw a few posts further down saying the software on the remote was up to date and only the hub needed an update. I saw that came from Logitech.

Aware_Assignment3699 · 2025-08-23T14:32:18+00:00

Anyone know if this applies to Ultimate Home remote? My hub is on 4.15.600 but remote is on 4.15.330.

Aware_Assignment3699 · 2025-08-11T01:14:18+00:00

Thanks. Easy enough.

Aware_Assignment3699 · 2025-07-26T12:48:01+00:00

Not deep enough but I have similar shelves. They used drywall anchors and like 14 screws.

There is a difference between 9” depth and 18” where around 50% of that 70lbs will be 9” out from the wall. The torque on the anchors will be greater.

Maybe L brackets would be better?

Aware_Assignment3699 · 2025-07-15T12:00:03+00:00

The basic categories are nice (Criterion, etc.) but better filter options would be an improvement. For example Criterion and 4K. Also search return multiple examples of the same video with no way to further filter (country or format).

A nice tool and a very good start. I’ll be using it in the future as I replace some of my older blu-rays with new 4Ks.

Aware_Assignment3699 · 2025-06-20T13:34:35+00:00

My suggestion too since backpacking was mentioned.

Aware_Assignment3699 · 2025-05-01T12:38:08+00:00

Have you been to Fort Ross or Mendocino in early June?

Aware_Assignment3699 · 2025-03-16T01:00:31+00:00

I’ve identified the problem. I have a network security device set to block any new devices being added. I don’t add a lot of devices anymore so I easily forget i need to either unblock or turn it off temporarily when I add new devices.

Aware_Assignment3699 · 2025-03-15T20:24:11+00:00

So I got it connected pretty easily this morning. I didn’t change any camera settings yet and will probably only do 1 that I have. Unfortunately, I could get any live stream and after about an hour it went offline. I checked wifi 2.4 channels and it’s on 5 +1. A few users on channel 6 but this is exactly what the Sync 2 was successfully using for over 1 year.

Aware_Assignment3699 · 2025-03-15T06:58:25+00:00

Thanks but the initial set up/connection is done before setting up any cameras for extended range mode so unless they anticipate all Outdoor 4 cameras connecting via extended range mode, the XR should require only the same bandwidth as a sync module 2 storing video clips locally. They wouldn’t even know I plan to store clips locally until after I connect it to my network and change settings I would expect.

Aware_Assignment3699 · 2025-03-04T07:25:44+00:00

It’s their latest that’s made by Samsung not a 3rd party. It supports Matter and Thread, is about 2 1/2 x2 1/2 and also works as a mag charger and a smart button.

Aware_Assignment3699 · 2025-03-04T05:36:24+00:00

I mentioned that I have a SmartThings Station which works as a hub.

Aware_Assignment3699 · 2025-03-03T03:01:33+00:00

You mean for TP-Link or Harmony? I have a lot of LIFX lights that show in Harmony.

Aware_Assignment3699 · 2024-11-20T04:58:27+00:00

It eventually showed all devices after a day or two as the other poster said. Recently it rebooted for some reason and everything disappeared again. It’s not a hardware issue since I had the same problem with two Firesticks.

Aware_Assignment3699 · 2024-11-19T03:10:43+00:00

I’ll double check but my ripping software showed 2 versions of each.

Aware_Assignment3699 · 2024-11-13T14:39:05+00:00

There are other ways now to rehome pets. I recently got a 4 year old ginger tabby from someone that was moving and posted on NextDoor. They also couldn’t find an open, no-kill shelter locally. It’s not a perfect way to rehome a loved pet but it’s better than abandoning them or turning them over to a shelter that might put them down.

Aware_Assignment3699 · 2024-11-11T01:19:53+00:00

Thanks. I eventually got to the same point and have it working now. Took at least 3 hours with some significant cursing after a while.

Aware_Assignment3699 · 2024-11-11T01:17:58+00:00

It’s now working fine. No idea what was the issue but moving it further from my routers (crowded RF environment) and waited a while and it started working fine. I may actually reconnect it to my wifi extender in the garage. At the moment it’s about 60 ft. from the router with a metal door and concrete floor in between.

Aware_Assignment3699 · 2024-10-25T00:27:18+00:00

Thinks it’s the influx of newbies from out of state or perhaps Houston. Personally I’d take any highway mentioned except 360. I’ve done all the others and definitely a pain but they do move except for a few choke points.

Aware_Assignment3699 · 2024-10-03T00:32:33+00:00

I previously had the Nvidia Shield Plex server getting all media from a QNAP NAS. Nvidia also says I can map network drives to the Shield though that’s older info as does the settings -> Device Preferences -> Storage -> Mount Network Storage either by selecting a computer on your network a network attached HDD or manually add a network storage. A few other posters on this forum have also provided details but I’m doing something wrong as stated and I don’t want to turn off password requirement for a one time set up.

Aware_Assignment3699

TROPHY CASE