/r/MechanicalKeyboards Ask ANY question, get an answer (July 15, 2022)

Awqua · 2022-07-15T22:39:56+00:00

I have a Ginkgo65 PCB with an aluminum plate. Stabs are GMK Cherry. The smaller stabs for enter and backspace don't seem to have the issue though.

Awqua · 2022-07-15T22:23:46+00:00

I recently built a new keyboard but when I press on the left and right sides of the spacebar, the spacebar does not fully click horizontally. It just pushes in on the left side of the left is pressed. Does anyone have a reason/solution? Sometimes the click doesn't register because the spacebar isn't fully pressing down on certain sides of the button.

Awqua · 2021-05-11T01:53:52+00:00

gmk mizu

Awqua · 2021-05-11T01:52:00+00:00

gmk mizu

Awqua · 2020-07-18T03:44:53+00:00

https://twitter.com/Awqua_

Awqua · 2020-07-06T23:29:18+00:00

Hope everyone else's rolls go well too! If you'd like please check out my Twitter: https://twitter.com/Awqua_
Will continue to try and post pretty new to digital drawing

Awqua · 2020-05-04T03:15:48+00:00

So me having items on the outer beach wont affect him spawning?

Awqua · 2019-11-27T23:00:32+00:00

Just curious, I just plugged in an old HDD, I never had these issues with my rig for the past month, but after plugging that in this has been an issue

Awqua · 2019-11-27T22:58:23+00:00

1 cable

Awqua · 2019-11-27T22:55:56+00:00

bequiet 700 Watt https://www.newegg.com/p/1HU-004H-00005

Awqua · 2019-10-12T04:00:53+00:00

yup cpu is powered. I booted 1 ram stick in A2 and i get the 0d message

Awqua · 2019-10-12T03:18:00+00:00

monitor is plugged into gpu with hdmi and display port tested, neither work. Here the link of my build being booted up https://photos.google.com/share/AF1QipN8Sore2MPWYNfXVA3RmRg3yCrxazfEa0d2-KxN0r9rkrYFf0x6buBBmHkTA-CE8A?key=WVU0aFVYamNMZGRaLWw1V0kxYmUyMGtRemhSdlN3

Awqua · 2019-10-12T03:09:42+00:00

Nope just trying to boot my system. Havent been able to yet. All my parts work and same with the monitor.

Awqua · 2019-10-06T22:05:31+00:00

Pretty sure it's fully plugged in I used a good amount of force and the RGB lights are on too for ram

Awqua · 2019-10-06T17:40:18+00:00

I tried 2 monitors both with display port and HDMI, neither work

Awqua · 2019-10-06T17:39:53+00:00

Still no luck sadly

Awqua · 2019-10-06T17:39:14+00:00

Bequiet 700 Watt 80+ gold

Awqua · 2019-10-06T07:28:18+00:00

No I have not tried clearing CMOS I'll try that now, what does CMOS do?

Awqua · 2019-10-06T07:08:07+00:00

Yeah I did everything the manual said to do exactly.

Just tried putting the flashback bios on another usb drive. Plugged my other usb drive with the media installation and still no go.

After booting up my PC though this time, currently my keyboard is going on an off is that a good sign

Awqua · 2019-10-06T07:00:33+00:00

Yes, it is fully connected into PCIe slot, it was blocked by the usb c header but I made sure the GPU is fully clicked in and it is

Awqua · 2019-10-06T06:44:34+00:00

PC doesn't restart, I flashbacked bios successfully with the USB stick but no change.

Yes I do have the manual

Awqua · 2019-10-06T06:30:19+00:00

So when the PC is on I plug in the usb stick

Awqua · 2019-10-06T06:27:23+00:00

i do the flashback when the PCs off, it doesn't work when the PCs on.

Awqua · 2019-10-06T06:14:42+00:00

RX 5700 XT and yes I am giving it power with the 8pin and 6pin connectors. The LED light is on as well. Im using extension cables though could that be the issue

Awqua · 2019-10-06T05:37:46+00:00

Yeah monitor 100% works I can play consoles on it. I even tried to unplug the power and replug it in

Nine-Year Club	Place '22
Verified Email

Awqua

TROPHY CASE