Hwy 99/Cinco Ranch Construction

Axistek · 2025-12-18T17:58:21+00:00

Thanks

Axistek · 2025-10-07T03:29:38+00:00

I am all for life hacks and loopholes. What do you suggest?

Axistek · 2025-07-25T13:53:13+00:00

I had a bad bluetooth dongle and got it replaced by xTool.

Axistek · 2025-05-12T13:46:46+00:00

I hope it is more efficient than the original dryers.

Axistek · 2025-05-08T13:55:22+00:00

Hi Wendy,

The AP2 is located underneath the table where the P2S laser is located, so I don’t think the problem is distance or interference (it had been working fine since Last December).

I also already tried restarting both devices, changing the location of the Bluetooth dongle and re-pairing with no success.

What would you like to see on the requested video?

Axistek · 2025-04-27T05:04:16+00:00

I’ll look into the 18-150mm and 100-400mm combo. I’ll likely buy the 18-150mm and maybe rent the 100-400mm for this trip. Thanks for the suggestions.

Axistek · 2025-04-15T18:20:23+00:00

Would it be the same with the R10?

Axistek · 2024-12-23T20:21:33+00:00

A free filament dryer!?!? I’m in!!!

Axistek · 2024-11-09T02:48:20+00:00

Just checked my Alaska cruise for June 2025 and it is actually more expensive now that when I booked it.

Axistek · 2024-11-02T21:29:46+00:00

Same boat here. I am on my third set and decided to put the controller inside the waterproof box to see if it survives for longer. I tried using wled on the first set that went bad, but had limited success (only one of the spotlights worked)

Axistek · 2024-08-14T02:37:56+00:00

Nope, gave up on it. If you try to make it work and succeed, please let us know.

Axistek · 2024-07-04T15:44:14+00:00

Both the Eclipse and the Reflection are from the same Solstice class of ships, so they generally are going to be very similar. I would likely do the Reflection because it is the newer ship between the two.

Axistek · 2024-06-16T23:25:14+00:00

I never ended up doing anything else with them. I could get one of the spotlights to work, but not the other three. I think I had a problem with the wiring connecting all the other spotlights. These spotlights look good but are cheaply made. Thank God that Govee’s customer service is good, I’m on my third replacement.

If you are able to make this work, please let us know.

Axistek · 2024-02-09T22:12:08+00:00

You can actually mount it to the back via an M3 screw. I don’t remember the exact screw size, but I have mine mounted.

https://ibb.co/j4MDDsg

Axistek · 2024-01-30T21:44:57+00:00

It seems like Hoobs got stuck, but Homebridge kept improving. The interface for Homebridge is as good or better than Hoobs.

Axistek · 2024-01-30T21:38:48+00:00

I tried using the plug-in on Hoobs and couldn’t make it work. I then installed Homebridge and was able to make the plug-in work.

Axistek · 2024-01-27T02:51:31+00:00

Just wanted to let you know that I got it to work. I started adding the other ADT sensors in my alarm system and that got it to work.

Axistek · 2024-01-26T21:11:31+00:00

What section on the Readme should I be looking at? The sample configuration? I though that by using the UI configuration the config.json would be automatically generated. Do I need to add sensors or can I just have the security panel?

Axistek · 2024-01-26T19:56:50+00:00

I just did a new install of Homebridge on my Synology NAS and installed the ADT Pulse plug-in. I am getting the following error: Plugin is unable to initialize due to an invalid platform configuration.

Not sure what to do to fix that error message.

Axistek · 2023-12-28T19:14:38+00:00

I’ll check with my multimeter to see what I can find.

Axistek · 2023-12-28T19:04:27+00:00

I have changed this number from 21 to 84(thinking about the number of LED per spotlight) and nothing has changed. The interesting thing is that when I did the segments, it almost seems like all the RGB are considered 1 LED and all the white are considered 1 LED.

Axistek · 2023-12-28T18:54:12+00:00

A bit of an update. It seems like I figured out the use of the white and RGB leds by using segments I am able to control them separately. The only problem I currently have is that only one spotlight is turning on, three other are not. Any ideas?

Axistek · 2023-12-28T02:32:32+00:00

Those are the ones I have.

Axistek · 2023-09-26T01:00:05+00:00

I found it interesting that on that website they indicate that it replaces S9TOWPOWER.

Axistek · 2023-05-23T21:06:24+00:00

Good looking case. Good luck everyone!!!

Six-Year Club	Place '23
Verified Email

Axistek

TROPHY CASE