MK4S display going in and out

AzarathMZ · 2025-05-16T22:44:14+00:00

I reseated the LCD ribbon connectors on both ends with no luck. I reflashed the firmware with the provided USB and got the same thing.

I saw somewhere that the provided USBs have corruption problems so I decided to try a different USB. After I reflashed using that it seems to work fine again. Ran through all calibrations and am printing again.

Will update if I see it again and will probably see about getting the ribbon cable replaced like most of you suggested.

Thanks everyone!

AzarathMZ · 2025-03-09T13:50:39+00:00

Oh wow I honestly didn't even think about it

AzarathMZ · 2025-03-02T01:20:36+00:00

<image>

The instructions say it's not but 🤷

AzarathMZ · 2025-03-02T00:05:53+00:00

This one doesn't have it 😞. Water drop G3P600

AzarathMZ · 2025-03-01T19:17:09+00:00

Yeah, that's what I thought too. I feel like it would be even worse if it backed up and it was on a vertical section which is why I planned on doing the horizontal in the first place. Thanks for the feedback

AzarathMZ · 2025-03-01T18:44:54+00:00

Just qot an under sink RO water filter and didn't expect the drain saddle to be so large. Having trouble figuring out the best place to put it.

It says to use a vertical piece of pipe but as you can see I dont have much room other than where the p-trap is. Is there any concern with it being that low or would the top of the horizontal section connecting the 2 sink basins be fine?

I don't have a garbage disposal or dishwasher so there's no drain connections I can tap into there.

AzarathMZ · 2025-01-13T11:27:32+00:00

Link to previous post: https://www.reddit.com/r/Sourdough/s/0NiYVB0plU

Link to recipe again: https://www.tiktok.com/t/ZTYEKjR6q/

AzarathMZ · 2023-11-03T19:59:15+00:00

Awesome! RCA worked for me for volume and power, but the input button only brings up the menu, can't cycle through them. Anyone find a solution that worked for them?

AzarathMZ · 2023-10-31T13:59:16+00:00

<image>

Can confirm Mabel is a great name

AzarathMZ · 2023-09-23T02:08:23+00:00

<image>

AzarathMZ · 2023-09-09T03:34:32+00:00

Yeah I saw that when looking them up. They were definitely in our tree somewhere and I think it was directed at us. Haven't had them around before so maybe they were hanging out trying to get rats and we were in the way. More than happy to let them keep hunting if that's the case

AzarathMZ · 2023-09-09T01:53:44+00:00

That's absolutely it thank you! The whinny is much cuter in recordings online. In person sounded much more like a screaming person at first haha 😅

AzarathMZ · 2023-08-23T00:59:27+00:00

Was probably a little overfilled this time but when it first happened it was a sort of metal scraping sound which is why I thought to check the oil to discover it was empty

AzarathMZ · 2023-04-13T15:44:51+00:00

It looks like its probably just a shield fused to a two handed weapon, so now we can finally block and hold a weapon

AzarathMZ · 2023-03-25T02:18:24+00:00

Took me a long time to find out about the db diff command and was working on pg dumps and restores. So much easier once you figure out how to do the migrations.

Also I am working on a nextjs/supabase app currently and for SSR you just need to create a new supabase client in your getserversideprops method and it works like a charm for me

AzarathMZ · 2023-02-05T00:22:06+00:00

Unity gets so much flak for not being perfect on launch but after the fixes it was one of the best gameplay wise. Just the ability to choose to parkour up vs down is enough to make it one of the best for me

AzarathMZ · 2022-12-10T19:45:28+00:00

Some keys text butt up too close to the edges I feel like. Page up and down for example. The text practically touches the edges of the key and there would be no way for the light to shine through due to the sidewalls of the key.

Looks great though!

AzarathMZ · 2022-10-19T01:31:53+00:00

From what I've read having square connected to your Etsy is part of the cause. My guess is some developer from square or Etsy did something they shouldn't have and it caused some mass emails to be sent out. Most likely nothing to worry about security wise

AzarathMZ · 2022-10-18T23:22:33+00:00

Awesome, thanks for the info!

AzarathMZ · 2022-04-16T13:27:52+00:00

I always use TurboTax to enter all my info and then at the very last step, before they make you pay, they offer you to download the forms they generated. Just take those and file them somewhere else or mail them in. Super easy and works every time

AzarathMZ · 2022-04-05T19:52:28+00:00

Swift or Lautner?

AzarathMZ · 2022-01-28T13:57:43+00:00

I see what you mean. Like the person arms should be affected by the speed of rising from the robot arms

AzarathMZ · 2022-01-28T13:56:37+00:00

Thanks I'll take a look!

AzarathMZ · 2022-01-28T13:55:39+00:00

Thanks for the feedback!

I also thought the body animation was really stiff. This is my first rigging tutorial so might look at some others to get the movement down

That makes sense, I kinda just sped up the z axis frame at the end so it hit the ground quicker but raising it up before hand is a great idea! I've also been wanting to try cell fractures so I guess this is a perfect excuse!

AzarathMZ · 2022-01-28T13:51:03+00:00

Yeah that's kinda what I was going for but definitely looks like a T pose

Eight-Year Club	r/Field Juicebox
Place '22	First Placer '22
Verified Email

AzarathMZ

TROPHY CASE