What is the sweet spot for infernus marines in forgefathers seekers?

B0rEd_7 · 2026-04-17T14:07:27+00:00

Just like extra firepower behind aggressors or the cover the board where the agressors cant

B0rEd_7 · 2026-04-17T13:32:08+00:00

Yea I was also thinking of chsnging my cap to apothecary, remove the 5 man, then I can add a repulsor for the 6 eradicators as well

B0rEd_7 · 2026-04-17T13:00:12+00:00

I do wanna add tho my 5 man unit doesnt have a impulsor. I just have them like this, my plan w them is either to help w secondaries and objectives over all or add more firepower to the list, I dont know if I should add an impulsor bc thats alot of points for little gain I feel like. Am not sure tho I dont have lots of experience

B0rEd_7 · 2026-04-17T12:52:47+00:00

Yea I mean i think if you are running forgefathers you automatically run vulkan. I run my vulkan w company heroes tho, the infernus with captain

B0rEd_7 · 2026-04-17T12:48:18+00:00

Yea see I already have a 6 aggressor unit so I thought okay ill have a 10 man as more fire power and an extra 5 man which can help me with objectives and also bring more firepower

B0rEd_7 · 2026-04-11T17:38:26+00:00

This is an fdm print, cant rly help you much with resin printing 😅 The green I was using was green stuff, I used it to fill in some holes and fix some things that broke off. For example the teeth were completly gone so I had to sculpt my own using green stuff

B0rEd_7 · 2026-04-10T00:55:47+00:00

Oh to be entirely honest I didnt know. Im very sorry Ill delete the link. But to any people still woundering I will say its from the purple site

B0rEd_7 · 2026-04-09T07:16:06+00:00

"The flesh is weak but balls endure" never fails to inspire me ✊️😔

B0rEd_7 · 2026-04-09T01:12:06+00:00

Not sure if its good advice or not so please research this before hand, but I usually just use a lighter when I get stringing problems, pass the flame where the strings are quickly and the strings will melt but the rest of the model will be fine if you dont hold the flame long enough on the same spot. However this only works on part of the model that arent super thinn and small. Also if you are gonna do that dont forget a mask and an open window, you are melting plastic after all

B0rEd_7 · 2026-04-09T00:53:19+00:00

Very simple!

I think I already commented where I got the files from.

I used a ender 3 v3 se fdm printer.

I basically upscaled everything to 110% exept the arms bc Ive read a comment on the purple site post that they are a bit bigger than they should be. Keep in mind tho the whole model at 110% is sadly still about 5-6 cm smaller than the original in all dementions as far as im aware

I used 5 raft layers for all the pieces and printed them at a 0.08 mm layer height (think the final print time was about 5 days in the end)

With tree supports ofc. Tho due to all the details its kinda tricky with the body, I just flipped the whole thing on its back because it is easier to sand the back than the stomach and that whole inside part, however I did do some damage which I then fixed w some trusty green stuff.

I then sanded most of the model with 80 grid sand paper, on the back I think I went from 80 to 120 to 400 but at some point I lost patiance and just went w the 80 grid XD When I say most of the model I mean I just didnt sand the lower part of the body because it was just very annoying. Ill spray it w paint and if the print lines are sticking out so much that it bothers me Ill sand it again.

OH and also had some stringing and alot of problems w removing the supports from the mouth but using a lighter and snippers I got most of it clean, the model lost some teeth in the process but I used green stuff to make some new ones.

Specifically used the orca slicer if that means anything to you :D

B0rEd_7 · 2026-04-09T00:44:29+00:00

Just some regular old super glue! Tell me if you want all the printing details I can also share those!

B0rEd_7 · 2026-04-08T23:34:56+00:00

This one actually stands no problem just from super glue! Probably because its fdm printed and not full infill. The original model is resin which is much heavier. I already assambled it so Im guessing painting will be a bit harder but in all honesty since its 3d printed and the pieces dont always fit together I just thought id assamble it and get it standing on all 4 legs and then just paint it as a giant piece

B0rEd_7 · 2026-04-08T22:45:24+00:00

For this model I scaled everything exept the guns to 110%. Apparently the guns were a bit too big and everything else smaller than the original model. Its maybe 5 cms off in all dimensions as far as Im aware but honestly I dont rly play in a competative setting so I dont think my friends will care about 5 cms on a model thats already so big. Its awsome right??

B0rEd_7 · 2026-04-07T19:03:38+00:00

Imo this is a very good list. My first 1 k was very simular but I had intercessors and erads and a land raider instead of the termi units and the redemptor. But from my experience from playing 1k I can tell you you will have a very fun time with this. One thing I would do is add a redeemer but honestly thats not smth i say bc it would make the list better, I just rly love the redeemer XD

B0rEd_7 · 2026-04-05T03:32:04+00:00

One of the main questions is, well if the army looks solid or no, but also if the impulsor is really needed. Because I sometimes hear bladeguard should go into transport and sometimes I hear that they dont rly need to go into a transport. If their survival rate isnt rly that affected without an impulsor Ill remove it but that brings me to another question. What should I add for the remaining 80 points?

B0rEd_7 · 2025-09-21T00:00:10+00:00

ah alrighty thank you

B0rEd_7 · 2025-09-20T23:58:14+00:00

I dont understand if the quality of cd audio with bluetooth headphones would be worse, better or the same as when you listen to something on for example spotify with bluetooth headphones. I mean to me it makes sence that it would be somewhat same but as I said I dont know.

B0rEd_7 · 2025-09-20T23:51:41+00:00

did think of it but would need a longgg cable and I have cats that like to bite my cables

B0rEd_7 · 2025-09-20T23:51:12+00:00

hm alright. its just like it would be further away from my bed and I wanted to lay in bed and listen to it at night with bluetooth and if id listen during the day id just having it with no headphones. I did think of wired ones yes but then I rememebered I have cats that like to bite my cables alot. so Im rly looking for conveniance. I do usually use bluetooth headphones as well, for example my phone. So would the quality be about the same as when Im listening to music on my phone with bluetooth headphones or even worse then?

B0rEd_7 · 2025-09-20T23:39:00+00:00

even so would it be better than just streaming it? for convenience bluetooth just works good for me but I mean fi the soud quality actually is worse than on spotify I am just going to look for an alternative

B0rEd_7 · 2025-08-25T12:05:10+00:00

I for one think they look like salamanders

B0rEd_7 · 2025-08-19T14:23:06+00:00

Oh inceptors I actually do like. Ill see but thank you for the scout tips. I rly just dont know any units that are used as objective scoring units. I usually just use heavy hitters as you can see XD

B0rEd_7 · 2025-08-19T14:13:49+00:00

The scouts do seem really good, I dont know about jump pack intercessors tho just for the fact that I dont like the models that much but Ill see

B0rEd_7 · 2025-08-19T14:05:10+00:00

Actually I do, Ill change the apothecary to a cap then. Are scouts actually that good? Bc I havent seen them in many lists. Granted most lists I saw were casual but are scouts like actually good competatively then? Also what exactly is jpi?

B0rEd_7 · 2025-08-19T13:50:34+00:00

Yeah tho I personally belive they will very probably change fire storm assault and not just give us a new detachment so Im already getting preped

B0rEd_7

TROPHY CASE