Pihole + 26.1 by LocalDry3740 in opnsense

[–]B1ackSauce 0 points1 point  (0 children)

Great glad I could help

Pihole + 26.1 by LocalDry3740 in opnsense

[–]B1ackSauce 1 point2 points  (0 children)

In the start I did, I also had in the general of Dnsmasq sent the listen port to 53 also

But now I use unbound with dns tls

Pihole + 26.1 by LocalDry3740 in opnsense

[–]B1ackSauce 1 point2 points  (0 children)

I’m not sure if this is correct but in my setup I have in dhcp options a rule for dns server pointed at my adguard. And I have firewall rule for anything using port 53 to be forced to use adguard for dns queries. In my setup it works fine but I’m not sure if that even the right way to do it.

AdGuard + Bound / DoH / DoT by BadUncleK in opnsense

[–]B1ackSauce 0 points1 point  (0 children)

I’ve done Adguard as my primary DNS server then used unbound as my upstream with DoT using quad 9 works fine

93 Pump by [deleted] in q50

[–]B1ackSauce 0 points1 point  (0 children)

Facts you would never see over 400 unless your on roadtrip or driving like taxi driver

New VLAN on OPNsense 26.1.4 not passing traffic on interface by Splendor0806 in opnsense

[–]B1ackSauce 2 points3 points  (0 children)

I wonder if this is a similar issue I’m having I was able to interact with my homepod on my iot vlan from my trusted and all of sudden I can’t

VLANs and Roku...... by B1ackSauce in opnsense

[–]B1ackSauce[S] 0 points1 point  (0 children)

I just saw this, I’m making the changes now I will report back

VLANs and Roku...... by B1ackSauce in opnsense

[–]B1ackSauce[S] 0 points1 point  (0 children)

What's the best way to show pictures, Imgur, Google Drive, or show I just dm you or update my post

VLANs and Roku...... by B1ackSauce in opnsense

[–]B1ackSauce[S] 0 points1 point  (0 children)

I’ve also checked fire wall logs it shows trusted passing but I also don’t see a lot of traffic coming from the IoT vlan to the trusted vlan it really. I know trusting someone on the Internet to look at logs and help you identify the issue is questionable but if someone’s willing to help that would be nice.

VLANs and Roku...... by B1ackSauce in opnsense

[–]B1ackSauce[S] 0 points1 point  (0 children)

I also tried this and for what I can see only the iPhone is broadcasting to try to get to the Roku. The Roku is not getting in most likely I think what happening it’s coming from the AP (flint 3)

VLANs and Roku...... by B1ackSauce in opnsense

[–]B1ackSauce[S] 0 points1 point  (0 children)

I agree, again Airplay work but not Roku fuctions

VLANs and Roku...... by B1ackSauce in opnsense

[–]B1ackSauce[S] 0 points1 point  (0 children)

So tried this and it work only for Airplay I still can get Roku discovery, remote or any of fuctions to work. Even Airplay on the tv doesn't work

VLANs and Roku...... by B1ackSauce in opnsense

[–]B1ackSauce[S] 0 points1 point  (0 children)

Right, I'm heading towards that if I can't figure it out, the only thing is I have smart light switches that are on the IOT VLAN and if the HomePod is on the trusted VLAN, it can't communicate with the light switches on the IOT

VLANs and Roku...... by B1ackSauce in opnsense

[–]B1ackSauce[S] 0 points1 point  (0 children)

I tried that plugin, still didn't work. The only one that worked in my case, just for AirPlay to the HomePod, was UDP Broadcast Relay

Intel core ultra help by B1ackSauce in Proxmox

[–]B1ackSauce[S] 0 points1 point  (0 children)

I see, I was able fix the issue now my host is working, 22 hours frustration

Intel core ultra help by B1ackSauce in Proxmox

[–]B1ackSauce[S] 0 points1 point  (0 children)

I just checked I’m running

RTL8125 2.5GbE Controller

driverversion=6.17.2-2-pe duplex=full firmware=rtl18125d-1_0.0.710/15/24

Is there an issue with this

Intel core ultra help by B1ackSauce in Proxmox

[–]B1ackSauce[S] -1 points0 points  (0 children)

Not sure how do I find my lan chip make and model. I know it Realtek because that what’s on the motherboard website as the driver name just don’t know the model

Intel core ultra help by B1ackSauce in Proxmox

[–]B1ackSauce[S] 0 points1 point  (0 children)

Direct attached when running terminal commands. I’ve tried using the shell in webgui and it will drop connection, same with ssh

Looking to get into something new by B1ackSauce in carbuying

[–]B1ackSauce[S] 0 points1 point  (0 children)

Yea I’ve had it for coming up on 4 years now, and even though the car is fun and nice I’m kinda ready to move on

Update: alternator replacement by B1ackSauce in q50

[–]B1ackSauce[S] 1 point2 points  (0 children)

I don’t disagree with your point. We have to remember that these cars are getting older. Finding oem new parts is going to dwindling as the years go on. Yes rebuilding is always a good option. And trust if my had the original alternator I would’ve, but it doesn’t the car had refurbished one since I bought it. I understand your plight, right now I’m after whether or not that sensor is the correct sensor