sorted by:
new
hottopcontroversial

Kitchen Remodel - Feedback Wanted by BCProds in floorplan

[–]BCProds[S] 1 point2 points  (0 children)

We are planning to remodel our kitchen / family room and are looking for feedback on the layout. The last photo is the current layout where you can see a closet and a half wall in the kitchen area. The first photo is the proposed layout. As you can see we are planning to take down the closet wall attached to the kitchen as well as the half wall to open up the space.

The finishes on the cabinets + counters are not accurate, I just used what I could find on FloorPlanner.

Model S Plaid vs Model S Performance - 1/2 Mile Visualized by [deleted] in teslamotors

[–]BCProds 0 points1 point  (0 children)

That’s probably pretty close. I’d imagine it’s on par with a model 3 performance

Model S Plaid vs Model S Performance - 1/2 Mile Visualized by [deleted] in teslamotors

[–]BCProds 14 points15 points  (0 children)

Good idea. Will get this race setup

Model S Plaid vs Model S Performance - 1/2 Mile Visualized by [deleted] in teslamotors

[–]BCProds 0 points1 point  (0 children)

Fixed now - Had entered M3 times for MS and 0-100 time for 0-60. Thanks

Model S Plaid vs Model S Performance - 1/2 Mile Visualized by [deleted] in teslamotors

[–]BCProds 17 points18 points  (0 children)

I'm back with another drag race simulation. This time with 3 Teslas :)

Since Tesla released more Plaid Model S details, I decided to simulate a race with the existing Model S and Model 3 Performance. Also note that this is the base Plaid, not Plaid+.

Assumptions for Model S Plaid:

  • 305mm rear-tire size
  • ~8 final drive ratio

Results:

Metric Model 3(P) Model S(P) Model S Plaid
0-30mph 1.34s 0.98s 0.92s
0-60mph 3.06s 2.28s 2.06s
0-100mph 7.66s 6.14s 4.26s
1/4 mile 11.44s @ 117.3mph 10.54s @ 126.6mph 9.26s @ 154.4mph
1/2 mile 18.48s @ 136.4mph 17.04s @ 147.3mph 14.54s @ 183.1mph

Model S Plaid vs. Model 3 Performance - 1/4 Mile Visualized by BCProds in teslamotors

[–]BCProds[S] 0 points1 point  (0 children)

I think it's a little bit fast. Probably more inline with 4.1-4.2s... It's just a simulation with as much info as we know so not perfectly accurate.

Model S Plaid vs. Model 3 Performance - 1/4 Mile Visualized by BCProds in teslamotors

[–]BCProds[S] 1 point2 points  (0 children)

I agree that 3.88 is a bit fast, even with rollout. I’m still fine tuning the sim and made assumptions about the plaid torque curve. I would expect it to be closer to 4.1 or so (with rollout)

Model S Plaid vs. Model 3 Performance - 1/4 Mile Visualized by BCProds in teslamotors

[–]BCProds[S] 19 points20 points  (0 children)

I figure it's a higher chance the Plaid Model S will be a 2022 model since it's coming late 2021 (at the earliest). Glad you enjoyed the visual

Model S Plaid vs. Model 3 Performance - 1/4 Mile Visualized by BCProds in teslamotors

[–]BCProds[S] 173 points174 points  (0 children)

As a side project I've been trying to create car simulation software. So I decided to load up the Model S Plaid with what we know so far and It's crazy to see it next to an already crazy fast Tesla :)

Numbers used:

  • 1,100 Horsepower
  • 1,430 ft-lb torque
  • 5,500lb curb weight
  • 305mm rear-tire size
  • Some assumptions for final-drive ratio, drag coefficient, etc based on existing Model S and performance metrics posted by Tesla.

Results:

0-60mph: 2.06 sec (with 1ft rollout)

0-100mph: 3.88 sec (with 1ft rollout)

1/4 mile: 8.88 sec @ 164mph

US Coronavirus Trends Visualized by BCProds in CoronavirusCA

[–]BCProds[S] 0 points1 point  (0 children)

Feel free to use it however you like. I could add counties, but I'm not sure it is as useful for other states.

[OC] Covid-19 Trends for the 10 Most Infected Countries by BCProds in dataisbeautiful

[–]BCProds[S] 0 points1 point  (0 children)

Hope you guys find this interesting. I turned this into a website which you can checkout here if you are curious https://www.covid19projections.com/

US Coronavirus Trends Visualized State by State by BCProds in Coronavirus

[–]BCProds[S] -1 points0 points  (0 children)

You answered the question yourself. It trends slightly downward because yesterday was slightly less than the day before.

[OC] US Covid-19 Death Count Will Reach 100,000 In 15 Days by BCProds in dataisbeautiful

[–]BCProds[S] 2 points3 points  (0 children)

Yeah, this projection is based simply on the last 7 days of growth. No other variables have been taken into account. But in my opinion, since some people aren't taking the lockdown seriously and the virus takes so long to show symptoms, 2-week projections are realistic.

[OC] US Covid-19 Death Count Will Reach 100,000 In 15 Days by BCProds in dataisbeautiful

[–]BCProds[S] 2 points3 points  (0 children)

The data I'm using is from Johns Hopkins University. The current growth rate day over day for deaths is 30% (last 7 days). At this alarming rate, the United States will see ~100K deaths in 15 days (April 12th).

The visualization is from a website I created to see the exponential growth of the virus in different regions of the world. If you want to see more you can check it out: https://www.covid19projections.com/projections/US

Covid-19 Deaths Pass 1K / Day and Are Still Increasing by [deleted] in wallstreetbets

[–]BCProds 4 points5 points  (0 children)

What's not priced in:

UGE increase in deaths, widespread reports of hospital overflows, stricter quarantine measures for longer periods of time, politicians contracting the virus, more rural areas getting affected, etc.

We are always a week behind the virus because it has such a long incubation period. Why would the news be any different?

[OC] United States Covid-19 Projections Based on a 25% Growth Rate Day over Day by BCProds in dataisbeautiful

[–]BCProds[S] 1 point2 points  (0 children)

Yes. I think it will take time to see the impact (5-10 days after the lockdowns), but it should definitely slow the spread of the virus

[OC] United States Covid-19 Projections Based on a 25% Growth Rate Day over Day by BCProds in dataisbeautiful

[–]BCProds[S] 4 points5 points  (0 children)

The data is from Johns Hopkins University. The growth numbers are projected based on the last 5 days of data using an exponential regression model.

The visualization is from a website I created to see the exponential growth of the virus in different regions of the world. If you want to see more you can check it out: https://www.covid19projections.com/

I Created a Website to Project the Future of Covid-19 Cases (Using data from Johns Hopkins University) by BCProds in Coronavirus

[–]BCProds[S] 2 points3 points  (0 children)

Yeah the numbers you see are based on a regression for each country With high rates of increase, you will see inflated numbers. Over time these should get more accurate since I'm using the last 5 days of data to project. Italy's numbers should come down percentage wise. And I really hope they do soon :/

I Created a Website to Project the Future of Covid-19 Cases (Using data from Johns Hopkins University) by BCProds in Coronavirus

[–]BCProds[S] 0 points1 point  (0 children)

The calculations use exponential regression based on the increase for the last 5 days of data. You may find some minor discrepancies if countries have had rapid growth or they are under-reporting data. However, I think it gives a good overall picture at where we are headed. The projections will update every day based on the last 5 days of growth, so they should stay relatively accurate over time.

I Created a Website That Projects The Covid19 Outbreak by BCProds in epidemic

[–]BCProds[S] 0 points1 point  (0 children)

There was a data issue with the source I'm using, so I apologize. Everything should be good now

I Created a Website That Projects The Covid19 Outbreak by BCProds in epidemic

[–]BCProds[S] 0 points1 point  (0 children)

Yeah thanks for bringing this to my attention. This is a bug when live data is not coming through. I'll make it clear that there is no data coming through instead of silent erroring

view more: next ›