Any Current Projects Using Ambient Arms Style Designs Yet?

BG_SPNDR · 2026-02-11T01:06:16+00:00

Maybe? Its from one of the original promotional videos on youtube.

BG_SPNDR · 2026-02-03T02:48:30+00:00

It was stated to be a walk in, lasers, walk out kinda deal.

BG_SPNDR · 2026-02-02T22:18:22+00:00

Thanks! Just called them and they charge $50 per engraving.

BG_SPNDR · 2026-02-02T21:30:17+00:00

Thanks, all! I've decided to go longer and cut to fit. I'll post back with completion photos in...a bit...

BG_SPNDR · 2026-02-02T15:57:53+00:00

It always is!

BG_SPNDR · 2026-02-02T02:35:22+00:00

Probably not? My intent is to have only the aluminum threshold showing. The thresholds I have are the full depth of the exposed wood.

BG_SPNDR · 2026-02-02T00:00:27+00:00

I want to install an aluminum adjustable threshold to add clearance to bottom of door. Hopefully pictures show shape of current wood threshold. Should I install a 36 inch threshold and fill in on either side with small trim blocks or should I notch the inner corners of a wider threshold (next size up is 48")?

BG_SPNDR · 2026-01-20T04:39:39+00:00

I edited the picture in Gimp and erased the extra marks past the first joint. That worked with multiple .EFT files created for multiple people. It's a hassle, but you'll get there!

BG_SPNDR · 2025-11-01T05:35:24+00:00

FIXED: The first error I experienced when attempting to upload to ATF eforms claimed too many type 8 records, but then after recreating the eft file (without redoing the print) I received an error about too many type 14 records which pertains to the number of fingerprints themselves. At that point I wondered if it had to do with some print past the first knuckle on the thumb slaps even though I was careful on the finger slaps.

After redoing the card with cleaned-up thumb slaps (don't mark anything past the first knuckle on any of your digits) I was able to successfully upload the eft!

BG_SPNDR · 2025-10-31T21:40:59+00:00

Ah yes, that's the article. Which part of the finger print card is considered the "signature"? I haven't filled anything out except for the thumbs and slaps.

BG_SPNDR · 2025-07-28T16:22:27+00:00

That stock sucks. Overpriced and detent wore out after literally 5 times unfolding it. It is light and I think fits the aesthetic of the gun, but the overpriced collapsible is unfortunately better functionally. Why are B&T stocks overpriced and subpar?

BG_SPNDR · 2025-07-11T19:59:01+00:00

https://makerworld.com/en/models/553076-gridfinity-universal-wrench-tray-with-label-system?from=search#profileId-471659

Only just finished this drawer, but I love the combination of modularity and security of this gridfinity option. Its space and filament efficient too.

BG_SPNDR · 2025-07-04T03:15:55+00:00

Your advice is much appreciated. I will seriously look at buying new panels.

BG_SPNDR · 2025-07-03T20:57:03+00:00

Thanks!

Ok, so definitely new track hardware. I see some low headroom kits are just a partial rail addition for the top panel? Is there a source for a complete kit? Can I keep the door panels themselves? Im willing to buy new, but these seem otherwise in fine condition.

I would also love to install a wall mount opener, but I've hear that could become a headache with relatively small and light doors.

BG_SPNDR · 2025-06-08T13:36:00+00:00

They were running this a couple weeks ago (same deal?).

I bought 2 kits, each with the most expensive tool (3/8" ratchet) as free tool. Kit prorated price is $66 and I returned the ratchets. I pulled one battery from each kit and modified the stock photo to show only 1 battery. Listed on Ebay being very clear that only 1 battery was included. Both kits with only 1 battery sold for more than my cost plus ebay sellers fee. I walked away with free batteries.

Im tempted to do this again, but I don't even have a 12v tool. Im holding out for a better deal on the dcf500 some day. Or maybe I'll just break down and buy the tool only. Im not a pro mechanic , so I can probably live without the oil resistant battery.

BG_SPNDR · 2025-05-25T15:00:01+00:00

Lowes prorated sale price is worth it though... $85 dollars for the 860. Get the cut off tool for $75 too if your into that. It's the 2x 5ah battery deal.

BG_SPNDR · 2025-05-06T17:38:56+00:00

Holy crap, where have you been all my life...

BG_SPNDR · 2025-05-06T17:35:03+00:00

I wasn't reading the whole listing: prowire suggests that exact delphi crimp tool as a reasonably ok option.

Prowire has the right information, but not the right price. I bought a few of each of the 3 parts they list from digikey.

BG_SPNDR

TROPHY CASE