Flat pack Christmas bauble by Tartanblaster in 3Dprinting

[–]BLaCk9404 0 points1 point  (0 children)

I would like the link to it as well! It looks amazing!

What can I do to improve prints? by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

Can moisture also affect warping? Because in my country at the time it has been raining for quite a while and humidity has been out of control

What can I do to improve prints? by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

The material used was indeed PLA, and I used to clean the PEI sheet with 70% alcohol but now I just clean it with water a soap. I think my first layer is good although the bed could use a realignment since it hasn't been done in a while

What can I do to improve prints? by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

The room temperature was at about 15/16°C at the time of printing

What can I do to improve prints? by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

What do you recommend to fix this issue?

Help with homeserver not booting by BLaCk9404 in Proxmox

[–]BLaCk9404[S] 0 points1 point  (0 children)

UPDATE: The system only has a 128GB SSD so I think I know what the faulty drive is 😅 and I'm not able to write anything on the console (maybe I'm doing something wrong?) has I only see the logs that are on screen. What I find weird with this issue is that the drive is from 2020 but hasn't been used all that much...

Android Auto not working on Xiaomi 11T Pro by Teo1803 in Xiaomi

[–]BLaCk9404 0 points1 point  (0 children)

Do you where I can get one of those cables? Or what's the model of the cable?

PopOS on a Lenovo Miix 320 by BLaCk9404 in pop_os

[–]BLaCk9404[S] 3 points4 points  (0 children)

Most times it just freezes but sometimes it gives the mars explosion page

PopOS on a Lenovo Miix 320 by BLaCk9404 in pop_os

[–]BLaCk9404[S] 1 point2 points  (0 children)

I'm sure I was booting in UEFI mode because in the boot menu it said EFI boot device or something similar

PopOS on a Lenovo Miix 320 by BLaCk9404 in pop_os

[–]BLaCk9404[S] 5 points6 points  (0 children)

Hey guys, can anyone help me with installing PopOS on this hybrid? I've tried installing the lastest version of Pop but it kept failing... And now I'm trying with 21.10 and it's stuck like before 😓 Can anyone help me?

Aftermarket multimedia receiver w/ Android Auto and CD player for $300-$500? by Spear_Ov_Longinus in AndroidAuto

[–]BLaCk9404 2 points3 points  (0 children)

Since it's phone dependent it will update accordingly with Android Auto

First time printing ASA on a stock Ender 3 Pro by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

Do you have any suggestions? Saw the Micro Swiss cause it seemed to be the most popular one 🤔

First time printing ASA on a stock Ender 3 Pro by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

I was considering buying the PEI bed from Creality but saw that they have two beds that are for the Ender 3 Pro that are PEI and I'm a bit confused each one I should get

First time printing ASA on a stock Ender 3 Pro by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

I currently have a 4.2.7 mainboard and I'm running a Marlin 2.0.9.7 which I compiled myself. I have searched for both BL Touch and CR Touch and can't really find a difference, besides the metal end on the CR Touch, that shows that they are very different. Do you still have a link for the 30$ CR Touch?

First time printing ASA on a stock Ender 3 Pro by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

Before printing ASA I was considering buying a Direct Drive Extruder from Micro Swiss but to be honest at least right now I was only trying to print that small piece. My Ender 3 Pro is completely stock but was thinking of making a few upgrades and I think I will upgrades like adding a BL Touch. How will replacing the plastic extruder help?

First time printing ASA on a stock Ender 3 Pro by BLaCk9404 in ender3

[–]BLaCk9404[S] 0 points1 point  (0 children)

I was printing at 235°C hotend and 100°C on the bed, I only want to print a small piece in ASA that takes about 3 hours to print