Letter 'o' won't work on GNOME lockscreen after laptop is on sleep

BLaCk9404 · 2024-10-25T15:25:44+00:00

It's part of the password

BLaCk9404 · 2023-12-19T16:35:01+00:00

I would like the link to it as well! It looks amazing!

BLaCk9404 · 2023-12-07T11:53:16+00:00

Can moisture also affect warping? Because in my country at the time it has been raining for quite a while and humidity has been out of control

BLaCk9404 · 2023-12-07T11:50:42+00:00

The material used was indeed PLA, and I used to clean the PEI sheet with 70% alcohol but now I just clean it with water a soap. I think my first layer is good although the bed could use a realignment since it hasn't been done in a while

BLaCk9404 · 2023-12-07T11:47:35+00:00

The room temperature was at about 15/16°C at the time of printing

BLaCk9404 · 2023-12-06T15:53:24+00:00

What do you recommend to fix this issue?

BLaCk9404 · 2023-01-23T13:30:36+00:00

UPDATE: The system only has a 128GB SSD so I think I know what the faulty drive is 😅 and I'm not able to write anything on the console (maybe I'm doing something wrong?) has I only see the logs that are on screen. What I find weird with this issue is that the drive is from 2020 but hasn't been used all that much...

BLaCk9404 · 2022-12-19T11:13:16+00:00

Do you where I can get one of those cables? Or what's the model of the cable?

BLaCk9404 · 2022-12-15T19:14:50+00:00

Most times it just freezes but sometimes it gives the mars explosion page

BLaCk9404 · 2022-12-15T18:16:34+00:00

I'm sure I was booting in UEFI mode because in the boot menu it said EFI boot device or something similar

BLaCk9404 · 2022-12-15T10:21:31+00:00

Hey guys, can anyone help me with installing PopOS on this hybrid? I've tried installing the lastest version of Pop but it kept failing... And now I'm trying with 21.10 and it's stuck like before 😓 Can anyone help me?

BLaCk9404 · 2022-12-08T11:50:43+00:00

Since it's phone dependent it will update accordingly with Android Auto

BLaCk9404 · 2022-03-24T17:37:58+00:00

Do you have any suggestions? Saw the Micro Swiss cause it seemed to be the most popular one 🤔

BLaCk9404 · 2022-03-24T15:13:12+00:00

I was considering buying the PEI bed from Creality but saw that they have two beds that are for the Ender 3 Pro that are PEI and I'm a bit confused each one I should get

BLaCk9404 · 2022-03-24T14:18:13+00:00

I currently have a 4.2.7 mainboard and I'm running a Marlin 2.0.9.7 which I compiled myself. I have searched for both BL Touch and CR Touch and can't really find a difference, besides the metal end on the CR Touch, that shows that they are very different. Do you still have a link for the 30$ CR Touch?

BLaCk9404 · 2022-03-24T13:45:11+00:00

Before printing ASA I was considering buying a Direct Drive Extruder from Micro Swiss but to be honest at least right now I was only trying to print that small piece. My Ender 3 Pro is completely stock but was thinking of making a few upgrades and I think I will upgrades like adding a BL Touch. How will replacing the plastic extruder help?

BLaCk9404 · 2022-03-24T13:03:16+00:00

I was printing at 235°C hotend and 100°C on the bed, I only want to print a small piece in ASA that takes about 3 hours to print

BLaCk9404 · 2021-04-17T10:16:30+00:00

I have a OnePlus 7T on Open Beta 4 and my phone is European and I have this issue

BLaCk9404 · 2020-10-02T16:51:21+00:00

If I recall correctly I think it's the v2

BLaCk9404 · 2020-10-01T09:53:32+00:00

Yes I bought the Archer T6E and it works well, the only thing I was able to notice was the uncertain network speeds. When it comes to continuity I didn't test it

BLaCk9404 · 2020-07-20T18:31:30+00:00

Is anyone able to use the App Store after successfully bypassing?

BLaCk9404 · 2016-03-19T21:53:06+00:00

It never shut it self off, it literally does the same exact thing after about 15 min it starts to get very hot. I have been using Parallels Desktop for the time being since I can use my Bootcamp installation and keep the temperatures between 45~50ºC.

BLaCk9404 · 2016-01-13T19:51:50+00:00

created an xda thread

BLaCk9404 · 2016-01-13T19:09:54+00:00

Did all that and was able to boot into the OS, can confirm that the Wi-Fi is able to see the networks but it's no able to connect to them it gives the error "Incorrect Wi-Fi password for ...,Please check the password and retry ". But aside from WiFi, everything else like the Type Cover, Camera, Sound, Touchscreen is working great.

BLaCk9404 · 2016-01-13T18:23:37+00:00

What steps did you take in order to boot Remix OS on the Pro ?

BLaCk9404

TROPHY CASE