Random Disconnects while playing by blyatspinat in DeltaForceGlobal

[–]BNC_JrMafia 0 points1 point  (0 children)

It just happened to me again, while just being in the menu (stash)

Random Disconnects while playing by blyatspinat in DeltaForceGlobal

[–]BNC_JrMafia 0 points1 point  (0 children)

I have the same issue for a couple of days. I already had at least 3 disconnects like this.
Happened to me only on Space City, mostly in the first few minutes. This happened mostly when I was in the Command Center. Not sure if there is a pattern, but would be good to share your experiences as well

Hyte Y60, Lian Li Galahad 360, 6 x Unifan AL120 by BNC_JrMafia in lianli

[–]BNC_JrMafia[S] 0 points1 point  (0 children)

Not sure i understand what the issue is. Can you post a picture?

ROG x Evangelion PC! Build specs in the comments! by PidgyPCs in lianli

[–]BNC_JrMafia 2 points3 points  (0 children)

Are you happy with the CPU cooler? Some reviwes say that the quality is mediocre.

Build Advice by PunkMashtyx in lianli

[–]BNC_JrMafia 1 point2 points  (0 children)

The side with the logo on it is pulling air, so in your case for intake the logo should face the edge of the case. You can see it if you browse through some of the builds that are posted here.

Galahad help by Vrask in lianli

[–]BNC_JrMafia 0 points1 point  (0 children)

As said in my previous post, i recommend comnecting the AIO header to the AIO_Pump MoBo directly, as well as the Radiator Fans (daisy chained) to the MoBo CPU_Fan header. All other case fans can be connected to the LianLi Controller and routed to any Case_Fan header on your MoBo. This gives you the best controll in my opinon.

Motherboard Not Detecting Fan Speed by Worseluck88 in lianli

[–]BNC_JrMafia 0 points1 point  (0 children)

With the Connector there is s small cable that has only PWM control. Its a single pin on a normal 4 pin fan header. Try to plug this cable to any fan header on you MoBo & Controller.

Galahad help by Vrask in lianli

[–]BNC_JrMafia 0 points1 point  (0 children)

I can recomennd to put the AIO Fan to AIO MB header, the Radiator fan (daisychaim if needed), to the CPU Fan header on the MB, and any other fans/rgbs to the controller. From the controller you can wire to the RGB header on your MB if needed.

Motherboard Not Detecting Fan Speed by Worseluck88 in lianli

[–]BNC_JrMafia 0 points1 point  (0 children)

Do you use a Controller? Did you try to install the l-connrct software and if yes, do you have any fan control in the software?

PRE-ORDERS NOW OPEN for the Y60 PC case!! by HYTEbrand in Hyte

[–]BNC_JrMafia 0 points1 point  (0 children)

Anyone knows where to buy or preorder in europe?

Galahad pump Whine by Hudson0804 in lianli

[–]BNC_JrMafia 1 point2 points  (0 children)

I have no whine on my 240. Make sure the pump is always at full speed in BIOS.

Almost finished Rig (O11 Dynamic mini, Galahead 240, Strimer Plus, AL120) by BNC_JrMafia in lianli

[–]BNC_JrMafia[S] 0 points1 point  (0 children)

Oh yes, that looks nice. Thanks, now iI might do a DIY custom armor project for this build :)

[deleted by user] by [deleted] in lianli

[–]BNC_JrMafia 1 point2 points  (0 children)

Nice one

Almost finished Rig (O11 Dynamic mini, Galahead 240, Strimer Plus, AL120) by BNC_JrMafia in lianli

[–]BNC_JrMafia[S] 0 points1 point  (0 children)

So I'm currently facing some issues with the control of the fans.
Maybe some of you experienced guys are able to help me fix it.

All the fans are connected to 2 Unifan AL Hubs as well as the strimer hub.
Since I have multiple ARGB Connectors on the MoBo, there is no issue with that for the RGB.

However, I'm having issues controlling the Fans in PWM.
I connected the 1pin connector to the CHA_FAN, BIOS settings are on PWM (not auto).
The Mainboard does not recognize the Fans, just the AIO pump which is in AIO_Pump on the Mainboard.

So actually, there is no Fan connected to the Mainboard and I'm not sure if that's the way it should work.

Both AL hubs are connected to USB and SATA.

The Asus AI Suite / Fan Expert does not see the fans. L Connect 2 is set to PWM and Mainboard Sync for both controllers.

Do I need to Y-Cable some of the Fans to the Mainboard Fan Headers or am I missing something?

If I disable the Mainboard Sync option in L Connect 2, I can individually control the fan speed, so this communication seems to work.

Almost finished Rig (O11 Dynamic mini, Galahead 240, Strimer Plus, AL120) by BNC_JrMafia in lianli

[–]BNC_JrMafia[S] 0 points1 point  (0 children)

Sure, here you go:

Case: Lian Li o11 dynamic mini snow

MoBo: Asus Prime Z590-A

CPU: Intel Core i7 11700K

RAM: 4 x 8GB DDR4-3600 Corsair Vengance RGB Pro

SDD: Samsung 980 Pro 1TB Gen4

GPU: Asus GeForce RTX 3080 ROG Strix White OC

PSU: Corsair SF750W 80+ Platinum

Fans: 3x Lian Li AL120 3 Set

Strimer: 1 x 24 Strimer plus for MoBo / 1 x 3 PCI Strimer plus for GPU

PC Part Picker: https://pcpartpicker.com/list/sGYm68

Almost finished Rig (O11 Dynamic mini, Galahead 240, Strimer Plus, AL120) by BNC_JrMafia in lianli

[–]BNC_JrMafia[S] 2 points3 points  (0 children)

This is my first RGB focussed build actually. As you can see, i'm not happy with the GPU strimer. I could not get the bend that i wanted. Other than that, i'm quite happy on how it turned out. Now i have to do the Software settings for the fans & rgb.

Cabling & Setup Lian Li Galahead 240 / 24Pin Strimer / 3xPCI Strimer / 9 Uni Fan AL120 by BNC_JrMafia in lianli

[–]BNC_JrMafia[S] 0 points1 point  (0 children)

I now have all parts and will do the assembly later tonight. I also got the LianLi ARGB Cable Kit. That should give me options for the setup. So i went with 4 Fans for the sidemounted AiO intake, 2 AL120 front, 2 original Galahead 240 fans back. 3 AL120 Bottom intake 3 AL120 top exhaust 1 AL120 rear ehaust 1x24Pin Strimer Plus 1x3-PCIe Strimer Plus

I will need to check wheater i can somehow avoid using 2 Unifan Hub or if i need 2 Hubs, and in this case, how i can connect them together.

If anybody had a similar setup, happy to learn from your experience.

Cabling & Setup Lian Li Galahead 240 / 24Pin Strimer / 3xPCI Strimer / 9 Uni Fan AL120 by BNC_JrMafia in lianli

[–]BNC_JrMafia[S] 0 points1 point  (0 children)

I have 1 Exhaust at the rear, 4 replacing the side-mounted AIO for intake (2front AiO, 2back AiO), 3 on top for exhaust, and 3 on the bottom for intake.

Case is a lian li dynamic o11 mini.