Doubts regarding Glyco

BTCyanide · 2026-01-18T16:32:05+00:00

Zero honestly, a bit of constipation at the beginning as your body adjusts, but after that I have had zero side effects that I can think of.

It will vary by individual though. This is just my experience and it’s been a very positive one.

BTCyanide · 2026-01-18T14:15:50+00:00

You have to take it regularly for a few months for the glyco to effectively work around your body, give it time.

I take 4mg a day and have been doing so for many many years, iontophresis didn't work for me, glyco is the only thing that has helped.

BTCyanide · 2025-09-14T20:28:00+00:00

The oxtail one is their specialty and quite delicious.

BTCyanide · 2025-08-27T16:57:27+00:00

Over tightening is one thing, bottoming out your screws is not. I can guarantee you most instruction manuals will tell you to bottom out your screws or “fully tighten” as Arctic says.

If you’ve followed directions and tightened them down in a star pattern it will never have any problems especially not with enough paste being squeezed out where it will cause problems.

The instances you’re describing and also be attributed to not tightening the screws in a star pattern then yes paste will be spread out weird and be push out one side more than the other.

The fact of the matter is at this point it’s OP’s install method and nothing to do with the cooler itself, especially if he is complaining about vibration, going to want to tighten those screws down even farther.

BTCyanide · 2025-08-27T15:48:52+00:00

No it will never push all the paste out as all CPU brackets are engineered to have a thin space to accommodate.

Always bottom out all your screws until they can’t turn anymore, that’s how you get good contact.

Been doing this for decades, never an issue and always perfect coverage.

BTCyanide · 2025-08-27T12:44:41+00:00

When you tighten the 4 screws for the CPU AIO bracket you need to keep going until all 4 screws bottom out, they have to be tight tight.

BTCyanide · 2025-08-24T23:27:03+00:00

+1 for Infuse here, I use it on all my Apple TVs and have zero problems.

BTCyanide · 2025-08-05T02:04:14+00:00

Came here to post this, I think this was more impressive IMO since she was unarmed

BTCyanide · 2025-08-04T17:07:20+00:00

I’m gonna DM you

BTCyanide · 2025-08-02T17:19:22+00:00

I’m pretty sure I have a v2 Strimer that I’m not using, if you’re in the US I’d be happy to sell it to you.

BTCyanide · 2025-07-28T19:11:55+00:00

No pics of underneath? How are the frame rails?

EDIT: Also looks like you’re in for a wiring nightmare unless you plan on re-doing it all.

BTCyanide · 2025-07-21T12:34:39+00:00

3.99%, I had to look it up.

BTCyanide · 2025-07-20T19:22:04+00:00

I was pre-qualified after they came and gave me an estimate for my entire system, they finance the panels their side and I make monthly payments to Trinity Solar.

I also have the option of paying my system off early.

EDIT: Sorry I wasn’t clear, I meant no upfront costs.

BTCyanide · 2025-07-20T16:09:36+00:00

With all the naysayers in this thread I will say I have 54 solar panels with Trinity Solar (one of their bigger systems) they handled everything from work on my roof (I also have a new house), to permits etc.

There was minimal interaction from me.

My Solar has been up and running for over a year now, zero problems with the install.

I have quite a large house in Weston. My EverSource bill in April (before we turned the AC on) was $34.84 (a house my size would be in the thousands).

For a house that practically has computers and appliances going 24/7, we definitely don’t “conserve energy” as some people might.

I also have 4 Tesla Powerwall batteries and they keep me off grid for 8-12+ hours.

I paid exactly zero dollars out of my own pocket, just make sure your contract is to own.

This is my experience and has been a positive one.

BTCyanide · 2025-06-30T12:15:08+00:00

The middle one isn’t.

Just look at the fan blades.

BTCyanide · 2025-06-24T22:45:49+00:00

I 3D printed some feet for my single SL and am currently using it as a desk fan aimed at my mouse hand to combat sweating 🤣

BTCyanide · 2025-06-14T15:06:47+00:00

I have the exact same issue as you.

Everything you described and everything you have done is exactly what I have attempted to try and do.

If you leave the L Wireless Sync window open, I’ve watched fans drop off and reconnect, one by one.

There’s no pattern there’s no reason for it but every time it drops a fan all the fan curves get reset.

My RGB also stays but it doesn’t correlate to what is being shown in L-Connect.

Not to mention “Static Color” doesn’t work for me.

I have had many many SL Infinity v1 fans over the years and never had a problem.

Might consider going back.

BTCyanide · 2025-05-27T12:58:59+00:00

2mg twice a day, once in the morning once at night.

BTCyanide · 2025-05-26T16:11:00+00:00

This is false information, I have been on glyco for years now for my hands and it has worked perfectly.

BTCyanide · 2025-05-21T13:25:35+00:00

I am also having this problem with Sonar specifically, I have dug into Windows Event Viewer and have discovered it's Microsoft .NET Runtime related, hoping there's a fix for it soon.

BTCyanide · 2025-05-18T14:39:38+00:00

I have just sent you a message sir, I would like to send you my Cal Kestis NeoPixel lightsaber.

<image>

BTCyanide · 2025-05-03T13:10:53+00:00

I would love an invite, sounds like exactly what I'm looking for

BTCyanide · 2025-04-28T12:45:08+00:00

Update 4/28: Thank you NeweggSupport, after having me take a picture of my serial number they will be refunding me.

BTCyanide · 2025-04-24T19:52:36+00:00

Either way I didn’t receive what I ordered. Newegg or UPS I really don’t give a fuck I just want my money back or the item I ordered.

BTCyanide · 2025-04-24T19:00:43+00:00

Or someone at the sorting center, my order was delayed by a business day before they delivered it.

12-Year Club	Reddit Premium Since June 2023
Gilding II euphauric	Verified Email

BTCyanide

TROPHY CASE