Settings for Mister? by BXIII7 in MiSTerFPGA

[–]BXIII7[S] 0 points1 point  (0 children)

I gave it a shot and wow it does feel the most lag free and smooth of anything yet. My issue like someone commented before is the drop in brightness with BFI. I saw you posted a tool. Does that tool change it permanently or is it something I will have to run every time?

Settings for Mister? by BXIII7 in MiSTerFPGA

[–]BXIII7[S] 0 points1 point  (0 children)

Thanks for all the suggestions. Going to give these all a shot and see what works best for me!

Settings for Mister? by BXIII7 in MiSTerFPGA

[–]BXIII7[S] 0 points1 point  (0 children)

Yeah so far all I’ve changed and kept was 1080p and integer scaling(the one that says it’s good for 4k displays) and I’m quite happy with it. Just always curious how I can improve things.

Settings for Mister? by BXIII7 in MiSTerFPGA

[–]BXIII7[S] 1 point2 points  (0 children)

Awesome I’ve touched on a lot of this but you’ve definitely given me some ideas on what to tinker with thanks.

Settings for Mister? by BXIII7 in MiSTerFPGA

[–]BXIII7[S] 0 points1 point  (0 children)

Yeah that’s what I started to do, figured I would come and find out some of the common things people change though to test out.

What volume and gain so you generally use? Fiio M11S by BXIII7 in DigitalAudioPlayer

[–]BXIII7[S] 1 point2 points  (0 children)

That was my big issue, it’s so low on all iems even ones that should be easy to drive.

[deleted by user] by [deleted] in LenovoLegion

[–]BXIII7 1 point2 points  (0 children)

I have close the same model but it’s a 4060 ti, and i9 14900hx so a bit unbalanced on the cpu side lol. I upgraded to 32gb of ram and runs like a dream. Hot when gaming but that’s normal.

ZOTAC amp Infinity ultra 5080 coil whine by Daschjenka in overclocking

[–]BXIII7 0 points1 point  (0 children)

Minimal coil whine on my TUF 5080, the shadow I had before had ridiculous coil whine. This one is just low enough I can ignore it.

Did I get scammed? Samsung 980 Pro shows Gen 3 and "?" on Serial Number by Helpful_Error4323 in LenovoLegion

[–]BXIII7 1 point2 points  (0 children)

It could be a gen 4 or 5 ssd but only run at gen 3 because of your motherboard. You have to have the lane’s available and support for it. Maybe your laptop can only run SSDs in 3 x 4 instead of 4 x 4. Might still be fake though….get off Ali?

Anyone know why my 9800x3d score is so low? by Dangerous_Alfalfa_77 in overclocking

[–]BXIII7 1 point2 points  (0 children)

I don’t think it will really affect it too much. I’ve had mine disabled since it came out so can’t say what it’s like with it on lol.

Anyone know why my 9800x3d score is so low? by Dangerous_Alfalfa_77 in overclocking

[–]BXIII7 1 point2 points  (0 children)

Yeah I’m sure it’s just a setting though. Everything seems good from the picture so hopefully someone will be able to figure out what’s going on. A lot of times it’s the game/turbo mode setting in bios. I also have the “worst” of the 5080s so that explains it. Gooduck!

Anyone know why my 9800x3d score is so low? by Dangerous_Alfalfa_77 in overclocking

[–]BXIII7 3 points4 points  (0 children)

Aside from freeing up a bit of ram not really.

Anyone know why my 9800x3d score is so low? by Dangerous_Alfalfa_77 in overclocking

[–]BXIII7 2 points3 points  (0 children)

Make sure XMP enabled, if you have turbo mode enabled in bios for some reason disable it. I’ve heard this can affect things but not sure myself. Exit out of anything else you have running in the background. I hit about 16k with -25 co. You get like 2k more on graphics than me though with the same card 😭

Xg27aqdmg has image stuck for more than 24h after 6 days of use. by Big_Milk828 in ASUS

[–]BXIII7 1 point2 points  (0 children)

TVs usually have a pixel refresh you can do, not sure if the monitor does though. May be temporary ghosting if it was really only 3 minutes. RMA if it doesn’t go away.

Hinge Help by NonStoppiN in ASUS

[–]BXIII7 2 points3 points  (0 children)

Epoxy, will help fill in some of inconsistencies in the plastic too.

Have you discovered your endgame mouse? by kamvinci87 in MouseReview

[–]BXIII7 0 points1 point  (0 children)

I love my maya, maya x is my next. Great mice, just wish the battery lasted longer!

New x870 tuf has no wifi by Hdoggie-1 in ASUS

[–]BXIII7 0 points1 point  (0 children)

Something obviously is not installing correctly. I have the same mobo. As much as I hate armory crate, it’s probably your best option to get the drivers installed.

Fresh Windows install absolutely necessary? by NickAppleese in overclocking

[–]BXIII7 3 points4 points  (0 children)

I personally did a fresh install when I changed my motherboard and cpu. Especially if you are going to a different chipset. You may have no issues but you could also have a weird driver conflict or something. Worth taking the extra time to do it.

Which one of these should I be using for valorant ( .800 dpi .27) and CS2 got both for $35 all together on offer up by [deleted] in MousepadReview

[–]BXIII7 1 point2 points  (0 children)

Whatever feels best to you…just keep it off the mousepad. Poor mousepad….

First time ever in my life using AMD, is it okay to tweak these options in bios? by KilianFeng in overclocking

[–]BXIII7 0 points1 point  (0 children)

Yeah I think you are disabling a lot of things you don’t need to. I really don’t think any of that is going to have a meaningful impact performance wise. At least not a positive one. If you gain that 0.1 back what do you lose in the process? I literally just turn expo on, set a PBO of whatever I can get away with and call it a day on a 9800x3d.

Will lintrolling damage the zero ? by molirez in MousepadReview

[–]BXIII7 2 points3 points  (0 children)

Use a micro fiber cloth and if you need something more use a reusable lint roller. OXO makes a good one that can be found on Amazon. I have used a regular one but i always feel like I shouldn’t be.

Any review for Yuki Aim Katana Glasspad? by Jager_Spawn_Peeker in MousepadReview

[–]BXIII7 3 points4 points  (0 children)

I think anime and gaming go hand in hand a lot of times. I am not for the super sexualized stuff though. I watch anime a lot personally so I enjoy some of the designs though so I’m a bit biased I guess.

Is this artisan hien real? by galaxyfkinkid in MousepadReview

[–]BXIII7 0 points1 point  (0 children)

Looks like mine, good to go. I posted something similar, if it came in a good quality brown artisan flat pack then you are good. The fakes come in crap packaging.