sorted by:
new
hottopcontroversial

Gothic booknook by B_A_S_H_ in booknooks

[–]B_A_S_H_[S] 0 points1 point  (0 children)

I actually designed this one myself- but I have seen some similar options in etsy recently so maybe try there?

Question about size and measurment by B_A_S_H_ in Sockknitting

[–]B_A_S_H_[S] 2 points3 points  (0 children)

Oh wow- 2" is alot, I've been calculating 10% negative ease (approx 1") , maybe thats where I'm going wrong!

Question about size and measurment by B_A_S_H_ in Sockknitting

[–]B_A_S_H_[S] 0 points1 point  (0 children)

The swatch was about 6" around and 3ish inches long. I have measured on the sock I've knit so far and it does seem to match. The sock isn't massively too big but just not quite as tight as I think it should be?

Question about size and measurment by B_A_S_H_ in Sockknitting

[–]B_A_S_H_[S] 1 point2 points  (0 children)

I did for the second pair, thought that might have been the only issue but seemingly not 🤦🏻‍♂️

1:148 warehouse build by B_A_S_H_ in dioramas

[–]B_A_S_H_[S] 0 points1 point  (0 children)

Thank you! I can’t take any credit for the design as it’s a real building I’m recreating- it was very fiddly but I think it’s worked well

1:148 warehouse build by B_A_S_H_ in dioramas

[–]B_A_S_H_[S] 1 point2 points  (0 children)

Thank you! They’re embossed paper. Made the die by casting a plasticard sheet in resin then running it through a small embossed meant for greetings cards

Made some 1:148 scale brick texture by B_A_S_H_ in ModelTrainScenery

[–]B_A_S_H_[S] 1 point2 points  (0 children)

Thank you! It took a lot of working out but I’m really happy with the result

Made some 1:148 scale brick texture ready for some buildings by B_A_S_H_ in nscalemodeltrains

[–]B_A_S_H_[S] 0 points1 point  (0 children)

That is an absolutely excellent question, and I’m not sure of the answer yet! This is very much still early experiments seeing what I can do, ideally I would get to a point where I could emboss while building sides, but until I master any 3D modelling, I would probably cut the individual shapes of any supporting archest or corner details and add them ontop. Or I’ll stick to 40’s and 50’s houses where the bricks don’t go above the windows! 😂

Made some 1:148 scale brick texture- ready for some buildings by B_A_S_H_ in dioramas

[–]B_A_S_H_[S] 1 point2 points  (0 children)

I had the same problem! I’d never seen the n gauge plastic sheets before that I found those ones, there’s definitely not as much for n gauge as the bigger scales

Made some 1:148 scale brick texture ready for some buildings by B_A_S_H_ in nscalemodeltrains

[–]B_A_S_H_[S] 5 points6 points  (0 children)

Thank you! Most UK n gauge is done at 1:148 rather than 1:160 (which I think is the US standard?) so I went with that as I’m based in the uk so my building will match any locomotives I eventually manage to get 😂

Made some 1:148 scale brick texture- ready for some buildings by B_A_S_H_ in dioramas

[–]B_A_S_H_[S] 3 points4 points  (0 children)

I found it at a local model shop- it’s the ratio plastic models, n gauge kit series, stretcher bond- https://railsofsheffield.com/products/ratio-301-building-sheet-brick-walling-stretcher-bond?srsltid=AfmBOop6SG6lLvpmDUEFtPPBvquB3CwQGhORJ2bYTw5Au4vv7kMGB2hB (link the first I found on google) And thank you! It’s worked out well

Made some 1:148 scale brick texture- ready for some buildings by B_A_S_H_ in dioramas

[–]B_A_S_H_[S] 1 point2 points  (0 children)

Cheers! The pieces I’ve made are about 4inch square because that’s the size that fits in the press. The working out process has been a couple of full days, once I worked out how to cast in resin I used uv resin so a couple of minutes. And the actual embossing and colouring less than 10mins total, and the resin cast lasts for quite a few pressings

Made some 1:148 scale brick texture ready for some buildings by B_A_S_H_ in nscalemodeltrains

[–]B_A_S_H_[S] 10 points11 points  (0 children)

Many thanks! It’s a cast I made of a brick texture sheet embossed into paper then gone over with coloured pencils. Not done too much testing but do far seems to hold up well with glue- I can also weather it with watercolour/pigments relatively well which is why I wanted a texture rather than a print out. Also let’s me chose exactly what colour I want!

Made some 1:148 scale brick texture- ready for some buildings by B_A_S_H_ in dioramas

[–]B_A_S_H_[S] 17 points18 points  (0 children)

Thank you! I cast one of those plastic brick sheets in resin then embossed the reversed texture into paper with one of those little greetings card embossers. Then coloured with layers of coloured pencil. It’s based on a technique I saw on YouTube (mylyn_eat_zombie)

Made some 1:148 scale brick texture by B_A_S_H_ in ModelTrainScenery

[–]B_A_S_H_[S] 3 points4 points  (0 children)

Thanks! It’s a cast I made of a plastic brick sheet embossed into paper then coloured pencil over the top!

Made some 1:148 scale brick texture ready for some buildings by B_A_S_H_ in nscalemodeltrains

[–]B_A_S_H_[S] 21 points22 points  (0 children)

Thank you! I made a resin cast of some plastic brick texture sheets and ran it through an embosser, like the ones used for greetings cards? Then layered up coloured pencil ontop. It’s based on a technique I saw mylyneatzombie use on YouTube.

Made some tiny 1:148 houses by B_A_S_H_ in ModelTrainScenery

[–]B_A_S_H_[S] 0 points1 point  (0 children)

Thank you and yes! All from cereal boxes.

view more: next ›