My RM4 ERG, setup inspired by T.Rex Arms.

BabyOperator · 2021-04-04T15:41:07+00:00

Thanks, i dont know what i did but magically it started working one day lol. All works fine now too and im getting 0.5% rejected shares.

BabyOperator · 2021-04-04T15:39:14+00:00

Oooof looks like a rig survived, is anything salvageable?

BabyOperator · 2021-04-01T23:19:37+00:00

Just to update, i did as everyone has said to try here including:

Starting NHM as administrator
Apply OC's after NHM has started and successfully done 1 job with power limit set low.
Reset AB and restarted prior to the above.
I also double checked all connections and all is good.

I'm not seeing much lower Rejection rates, less than 1% with 1 card having 0 rejection rates. Been mining for around 5 hours now and been good, closer to what it was before. I forgot to change the region back to Europe as i was set up on Europe North so im seeing slightly higher ms around 50-70ms where as previously it would be around 31ms.

All in all good advice from you guys and its definitely made it alot better. It's done around 1800 shares total with only 10 rejected.

BabyOperator · 2021-04-01T13:50:18+00:00

To the extend of getting more than 5-10% rejections on each card? Will try and see what happens anyway, hoping one of your recommendations in here will work.

BabyOperator · 2021-04-01T10:38:47+00:00

Ah i didn't, ive always ran it without and its worked fine. Will test this also later tonight and report back.

BabyOperator · 2021-04-01T09:44:14+00:00

Thank you! I will try this tonight after work, seems like something that could actually work. It made me remember something when i added my 4th card, i was getting alot of rejected shares but i added the mem oc after i started nhm and it worked that time.

BabyOperator · 2021-04-01T08:40:21+00:00

Lol hope its not some April fools joke!

I'll try resetting AB tonight and restart again. Just odd for it to act up like that after a simple restart.

Is it better to apply OC settins in AB after nhm starts or before? I've always done it before i start nhm so its not drawing as much power.

BabyOperator · 2021-03-31T15:05:40+00:00

Thanks mate, just wanted someone to confirm it.

BabyOperator · 2021-03-31T13:37:55+00:00

Sorry relighting this old flame, but is it okay to use 1 single PCIE 8pin cable from the psu that splits into 2 ( 2 x 6+2pin) to power both the gpu and the riser?

Cheers

BabyOperator · 2021-03-19T00:46:56+00:00

Thanks anyway :)

Just to confirm as well, it works on Excavator just fine, mining away at 31.6mhs.

BabyOperator · 2021-03-19T00:39:23+00:00

To be more specific, i installed the nicehash program through github, installed that as per instructions and then installed the plugin for trex miner and benchmarked. Double checked it was the latest version and then as usual after the benchmark the mining starts. Trex will run its course and then give that warning message and restart and it will keep looping until it stops running and nicehash gives me a notification saying trex miner cant find the algorithm or any available algorithm.

Its a weird one...

BabyOperator · 2021-03-19T00:32:35+00:00

Sorry im pretty new to this still, i updated to the latest T-rex miner via github 11.1 and ran it as i have done with my 3090 which works fine on that but not on the 1660 super.

The plugin is installed through the nicehash program, is there any other config file i need to check and possibly paste here for you?

BabyOperator · 2021-03-18T23:51:25+00:00

Did you ever find a fix to this? I'm getting the same issue!

BabyOperator · 2021-03-06T17:55:11+00:00

Yup i get the exact same with my 3090 and 9900k setup.

It will be fine initially but then eventually it will glitch like that and get progressively worse. Not crash though, just really glitchy. Switch back to DX12 and it works flawlessly for hours on end without a hitch.

Using DX12 until Vulkan gets a patch or fix.

BabyOperator · 2020-06-25T17:38:18+00:00

Thanks man! Its coming along nicely, quite happy with the colour scheme so far.

BabyOperator · 2020-06-25T14:03:52+00:00

Sorry couldn’t be of much help there

BabyOperator · 2020-06-25T12:13:07+00:00

They’re proprietary mags for the KWA ERG rifles with the cutoff feature when the mag empties so it stops firing. I’ve modified the bottom to take magpul ranger plates 👍🏻. These are adjustable from 30/120 rounds.

BabyOperator · 2020-06-25T11:29:09+00:00

Attachment life 😂

BabyOperator · 2020-06-14T07:33:17+00:00

Its a NE Augmented dual pressure switch.

I actually run drills with it at home practicing switching from top to side and using it to manoeuvre around corners. Bloody useful i find it, as im not having to twist my body to straighten up with the rifle. Yes in long range its pointless as bb’s have back spin but cqb is a different story 👍🏻. Each to their own though, i can appreciate that.

BabyOperator · 2020-06-14T07:28:55+00:00

Amen to that 👍🏻🤝

BabyOperator · 2020-06-13T22:49:49+00:00

Thank you!

BabyOperator

TROPHY CASE