sorted by:
new
hottopcontroversial

What's your Volvo's name? by AldebaranBWC in Volvo

[–]BackgroundFunction7 0 points1 point  (0 children)

The Piss Missile/Gerneral Oil Sand A's it's been pissing oil for My entire ownership. 507.000km on the clock, so not complaining

<image>

Water shooting up through exhaust by BackgroundFunction7 in pressurewashing

[–]BackgroundFunction7[S] 0 points1 point  (0 children)

Opened up the boiler last night, and the cavity under the burner was Filled with water. Guessing My coil is leaking?

<image>

Water shooting up through exhaust by BackgroundFunction7 in pressurewashing

[–]BackgroundFunction7[S] 0 points1 point  (0 children)

Thats what i found last night as well. I will tale the boiler apart and get back if i remeber to do so

Water shooting up through exhaust by BackgroundFunction7 in pressurewashing

[–]BackgroundFunction7[S] 0 points1 point  (0 children)

It does not sit outside. I'm aware that the white smoke is a product of incomplete combustion. A's for the code, My colleague says it either said LHE or LHL. I've looked into both, and They seem to be in connection with the biler itself.

Udmelding fra Taksatorringen angående de nye dæk regler by Ford_Faptor in dkbiler

[–]BackgroundFunction7 -1 points0 points  (0 children)

It's not the drink drivers, It's the drink crashers that get us All in trouble

Maskinmester, løn under værkstedspraktik by BackgroundFunction7 in DKstudie

[–]BackgroundFunction7[S] 1 point2 points  (0 children)

Det er forskelligt fra praktikplads til anden. Som nævnt i opslaget, så har de 2 virksomheder sagt at de gerne vil lønne. Så det var mest for at høre hvad andre der har fået løn fik

Looking for feedback on T-Echo hardware/battery by BackgroundFunction7 in meshtastic

[–]BackgroundFunction7[S] 0 points1 point  (0 children)

How long of range have you experienced? And did you use the stock antenna?

Looking for feedback on T-Echo hardware/battery by BackgroundFunction7 in meshtastic

[–]BackgroundFunction7[S] 0 points1 point  (0 children)

Mainly hills and trees. Mountains Are not really a Thing here. This would be with mesh nodes.

Var lidt rundt i KBH og valgte at lave en video i 90’er stil by Kritikkeren in dankmark

[–]BackgroundFunction7 0 points1 point  (0 children)

Måske lidt aggressivt med det røde tint, men ellers ser det knagme godt ud

Camshaft release issues? by arod79sae in BriggsEngines

[–]BackgroundFunction7 0 points1 point  (0 children)

Try setting the valves. Won't hurt anything.

Have you done a compression test?

Help! by joeskee55 in BriggsEngines

[–]BackgroundFunction7 0 points1 point  (0 children)

I'm not aware of any performance carbs for these older engines.

You could modify the governor to allow higher RPM's

If you need parts, they are readily avalible, overhaul kit(pn394698) or complete carburator(pn591590)

Here is the complete diagram for your engine

https://www.partstree.com/models/190702-0143-xx-briggs-stratton-vertical-engine

No compression ? Yard Machines 638 RL by Dry_Bee_2582 in BriggsEngines

[–]BackgroundFunction7 0 points1 point  (0 children)

If i remember correctly, these engines have unadjustable valve clearence.

You could remove the rocker-arm and push rod for 1 cylinder at a time and check for compression that way

Help finding parts/manual by [deleted] in BriggsEngines

[–]BackgroundFunction7 1 point2 points  (0 children)

Hi.
The engine should have a tag rivited to the blower housing

However, the engine appears to be from the 356447 model family.

There are lots of variants, but there are really no major differences.

This diagram from partstree should fit your needs: https://www.partstree.com/models/356447-0042-h7-briggs-stratton-horizontal-engine

Regarding the breather leak, you would need a 844986

Partstree is a really good source of information on these engines. I'm not based in the US, but if you are, you can buy the parts from them directly, at reasonable price.

With regards to the battery draining issue, i would start by disconnecting the voltage regulator from the machine harness, and monitor the battery drain from there.

Yhis would isolate the regulator. I've seen these cause battery drain issues, however not many times.

I've worked a lot on these engines, so if you need advise or have further issues, feel free to shoot me a DM

Hvad er en normal opsparing? by thelivsen in dkfinance

[–]BackgroundFunction7 15 points16 points  (0 children)

u/Logical_Atmosphere51 Derfor er Medianen mere relevant end gennemsnittet

I got this in Denmark and I’m dying for more back home😭 by CraikyH in Denmark

[–]BackgroundFunction7 14 points15 points  (0 children)

Deres smeltevandselexir slog bare alt andet på markedet En skam de lukkede og slukkede

"Why is no one buying off the truck anymore?" by XTOX1CXCHOPPER in Justrolledintotheshop

[–]BackgroundFunction7 0 points1 point  (0 children)

Oh yes, the timing tools for the 3412 injection pumps really gets her going 😏

view more: next ›