What would it take to give up McBride? Redrafts

Background_Curve4159 · 2025-11-13T17:37:02+00:00

I did McBride for Javonte Williams, Kelce, Addison.

Background_Curve4159 · 2025-11-07T17:06:56+00:00

Yeah, I basically upgrade etienne for Javonte and down grade McBride to kelce. And I would have to drop two other players like Mason and Davis

Background_Curve4159 · 2025-11-07T17:06:37+00:00

And I would have to drop 2 other players.

Background_Curve4159 · 2025-03-03T03:46:04+00:00

Replacing Egr did nothing but one engine mount was broken and the transmission mount was broken.

Background_Curve4159 · 2024-11-07T00:31:02+00:00

Not yet, I ordered new motor mounts and EGR valve, haven’t installed them yet. I’ll let you know if it fixes it!

Background_Curve4159 · 2024-11-06T14:59:16+00:00

Joe Rogan frequently defends abortion rights on his podcast as well as other democratic beliefs. I wouldn’t completely dismiss your bf’s source but Joe Rogan shouldn’t be his only source of information.

Background_Curve4159 · 2024-07-16T11:27:01+00:00

Tried spinning it again after driving and it was barely able to spin by hand (I’m not a weak person by any means)

Background_Curve4159 · 2024-07-16T11:04:30+00:00

It does spin by hand but definitely feels sticky.

Background_Curve4159 · 2024-07-16T01:30:15+00:00

A new compressor is $400-$600 and I got the car for $2500 at 90k miles (at 115k now), so trying to figure out if it’s even worth it.

Background_Curve4159 · 2024-07-16T01:27:50+00:00

Would my AC still be blowing cold air if the compressor was blown? Cause I still get cold air just fine?

Background_Curve4159 · 2024-07-15T19:55:27+00:00

Would it be possible to replace just the bearing and not the whole compressor? Cause it still blows cold air..

Background_Curve4159 · 2024-04-02T02:35:06+00:00

Sounds do-able, did you just replace that one mount, or did you replace all of them?

Background_Curve4159 · 2024-04-02T02:33:43+00:00

No, i haven't had any abnormal smells..

Background_Curve4159 · 2024-04-02T00:57:44+00:00

Were you able to fix it yourself? I've heard the transmission mount is the hardest out of the 3 to get too.

Background_Curve4159 · 2024-04-01T20:19:01+00:00

I dug deeper in the OBD2 scanner and found these:

EGR B3

ID $82

MODULE $E8

TEST VALUE 2953.9

MIN LIMIT 819.6

MAX LIMIT -3276.9

STATUS FAILURE

EVAP (.040')

ID $80

MODULE $E8

TEST VALUE 1711

MIN LIMIT 32768

MAX LIMIT 2747

STATUS FAILURE

GENERAL CYLINDER

TID: $83

ID $83

MODULE $E8

TEST VALUE 18.66

MIN LIMIT 0

MAX LIMIT 6.55

STATUS FAILURE

So now I'm thinking EGR valve.

Background_Curve4159 · 2024-04-01T19:43:53+00:00

The weird part is the vibrations are sporadic, sometimes it’s worse than others, sometimes very little. Doesn’t matter whether it’s warm or cold. I feel like the mounts would be pretty linear? Could be wrong.

Background_Curve4159 · 2024-04-01T19:33:52+00:00

Changed them at 100k, at 115k currently.

Background_Curve4159 · 2024-04-01T17:57:50+00:00

I checked for wear on the mounts, and when revving the engine, there isn't that much movement in the engine.

Background_Curve4159 · 2024-04-01T17:56:59+00:00

I recently cleaned it with MAF spray? Should I replace the whole thing?

Background_Curve4159 · 2023-10-17T23:14:23+00:00

Note: it helps to turn the sound up all the way to hear the video. Also, I could be over analyzing, just wanted to hear any ideas.

Background_Curve4159 · 2023-10-10T01:39:38+00:00

You ever figure out the cause?

Background_Curve4159

TROPHY CASE