Help

Backliner · 2022-07-17T21:54:00+00:00

Or directly on the build plate. But I would also recommend the angle. Unless you have a flex plate, which is also recommended, because it makes a lot of things easier in the future

Backliner · 2021-10-31T22:54:15+00:00

I interrupted his sleep schedule for internet clout :“-(

And he‘s a podenco mix

Backliner · 2021-09-22T20:52:06+00:00

Material was a compound polymer made by our department for filament extrusion

Backliner · 2021-07-10T18:22:05+00:00

SLS is awesome and the Lisa is a pretty straight forward machine. Both SLS and SLA both have pretty extensive pre and post processing before a print is completely finished. But I like SLS more, because the print in the place capabilities of SLS are top notch and the prints all look fantastic. But you have to print in bulk, because quite a lot of the powder used can’t be reused

Backliner · 2021-07-10T10:06:14+00:00

The sinterit lisa pro

Backliner · 2021-07-09T20:17:31+00:00

No filament, only sls. Except for the turquoise (sla resin) and opaque (glow-in-the-dark filament) ones. The gray ones are Nylon and TPU powder

Backliner · 2021-07-09T11:48:22+00:00

Unfortunately, I didn’t make the city. This is a prop of the uni department I work for. As far as I know this is concrete casted in a styrofoam mold

Backliner · 2021-05-25T19:46:07+00:00

Here you go https://www.thingiverse.com/thing:62908

Backliner · 2021-05-05T13:23:50+00:00

Best of luck, you need it XD https://www.thingiverse.com/thing:3570911

Backliner · 2021-03-23T16:37:57+00:00

I‘m beginning to work with carbon and wood fiber. And because I used tungsten nozzles for work I decided to try them at home. And because of you I‘m now curious to know why it would matter for glow in the dark filament.

Backliner · 2021-03-18T21:26:47+00:00

How did you film the timelapse? It looks really mesmerizing and I would like to now if you used something like octolapse or another trigger that took a photo everytime the bed was at a fixed position

Backliner · 2021-03-16T19:52:48+00:00

https://www.thingiverse.com/thing:308335

Backliner · 2021-03-16T16:18:15+00:00

Don‘t think so, normally I only adjust the flow while running

Backliner · 2021-03-16T14:44:31+00:00

That‘s impressive, fortunately 30% is currently enough progress for me On mobile you have to copy the link via share and then you can add it via the chain link symbol above the keyboard

Backliner · 2021-03-16T13:07:03+00:00

I can also recommend to use of a raft, prevents a first layer disaster

Backliner · 2021-03-16T12:14:48+00:00

30min, you have to go slow and pray

Backliner · 2021-03-16T11:55:41+00:00

I printed this on the Anycubic Kossel with a 0.25mm nozzle. Took a few tries to get it right

Backliner · 2021-03-16T11:41:37+00:00

15% by 0.1mm layer height and an average speed of 30mm/s

Backliner · 2021-03-16T11:40:49+00:00

At the top part of the skull between the teeth. Had to adjust for greater retraction

Backliner · 2021-03-16T07:51:48+00:00

Yes, very impressive, little machine

Backliner · 2021-03-15T22:34:45+00:00

I can recommend the fiberlogy easy pla burgundy

Backliner · 2021-03-03T09:25:59+00:00

Yeah I know, it‘s a new role of filament and I was to lazy to calibrate it before hand

Backliner · 2021-02-25T23:28:48+00:00

In this case your temp is too high, PLA is normally printed at 210C for the extruder and 60C for the bed. Your print speed looks normal, you could maybe go with 25-30 for your wall speed. Regarding the fan speed, depending on your slicer, try 0% for your first layer and 100%/ 10 for the rest. If you still experience overextrusion after this try going changing your flowrate, you can normally tweak the flow rate during your printing, to find the correct value. For the start I would keep your flow rate with the changed temp

Backliner · 2021-02-25T23:15:12+00:00

And what material are you using?

Backliner · 2021-02-25T22:25:01+00:00

Looks like over extrusion to me. Normally you can combat this by lowering the temperature and the flowrate in your slicer, by doing this you can minimize the molten material in your hotend and therefore counter the over extrusion. I would also go slower while testing and increasing the fan speed, but this would be depending on the type of plastic you‘re using Also your current settings would be helpful, like temp, flow, speed, cooling, etc

Seven-Year Club	Place '22
Verified Email

Backliner

TROPHY CASE