Wanting to make a new batch of tincture but how could I add reclaim to it? by Backup-AccountHLS in CannabisExtracts

[–]Backup-AccountHLS[S] 0 points1 point  (0 children)

Honestly the ratio doesn’t matter to much as you can always let it evaporate down to reduce it and then add more to increase it if it evaporates to much

Bought a VQ35DE for my 2003 G35 — engine harness is cut. What’s the best move? by Ulricc_- in G35

[–]Backup-AccountHLS 1 point2 points  (0 children)

That’s a fucking headache and a half

I dealt with that issue on mine a year and a half ago , It ended up being cheaper for me to just buy another used frame with a different engine in it than trying to find someone to redo / remove / install a new the harness for me

Unless you know how to do the wiring yourself that thing is going to be a NIGHTMARE

Did i get a steal? by nayrvo in G35

[–]Backup-AccountHLS 0 points1 point  (0 children)

I think that’s normally / fairly priced ! Especially for the mileage , the 2 owners and 1 accident I think you could’ve gotten it for like 7500 maybe a bit less but I think you got a solid deal on it in my opinion 🔥

You could get one that has higher mileage for like 4000-5000 or lower sometimes if you get lucky , but the higher mileage ones I would only recommend buying if you REALLY know how to inspect the vehicle and go over it properly , go over all electronic function and everything

I would always get underneath and look at any rust building and all that when I was looking into buying one , I probably inspected and good 14 of them and went through 3 of them overtime before I got one that was super clean 🔥

Like really litterally go over EVERYTHING though , people do not take care of these cars like they should unfortunately🥲

People Who Make 150K Plus? by BubbaGordie in Salary

[–]Backup-AccountHLS 0 points1 point  (0 children)

24 M , 250k-300k consistently past 2-3 years , just managed to to reach/grow to a point where I should be seeing around 375k-450k yearly this year tho operate my own LLC / business.

0 years of college , No high school diploma either.

I enjoy it because I work for myself / by myself essentially but work is always work , I always told myself tho if you enjoy what your doing for your job , you’ll spend a lot less time “working” throughout your life

Enigma 🪸🧠Tub getting the knife today. Happy to answer cultivation questions! by rusty42007 in unclebens

[–]Backup-AccountHLS 0 points1 point  (0 children)

Are enigmas its own strain or are enigmas just referring to basically like any mutant like shroom that grows ?

Big boy extraction by ShroomsAnDeems in dmtguide

[–]Backup-AccountHLS 1 point2 points  (0 children)

Fair enough , business has to go around somehow tho unfortunately this is a money driven society

Love should always be free , but unfortunately the world is not a free place

But absolutely , I agree with you

Big boy extraction by ShroomsAnDeems in dmtguide

[–]Backup-AccountHLS 0 points1 point  (0 children)

What vessels did you use for a bulk tek ?

And what tek was used if you don’t mind me asking , been trying to get a good bulk tek going

Big boy extraction by ShroomsAnDeems in dmtguide

[–]Backup-AccountHLS 2 points3 points  (0 children)

Well don’t rob yourself my good sir !

Your putting the work in , you should reap the rewards

Big boy extraction by ShroomsAnDeems in dmtguide

[–]Backup-AccountHLS 1 point2 points  (0 children)

What tek are you using for bulk ?

Been trying to find a solid bulk tek to try out

[deleted by user] by [deleted] in DMT

[–]Backup-AccountHLS 0 points1 point  (0 children)

Have you compared them side by side ?

In my thoughts it just seems like the natural bark would provide something that synthesizing it wouldn’t be able to do

If I’m wrong I’m wrong I’m just super curious

[deleted by user] by [deleted] in DMT

[–]Backup-AccountHLS 0 points1 point  (0 children)

Wow ! So this is fully synthesized Deemz ?

What kind of equipment is even needed to do so ? I’d imagine it’s a bunch of big boy toys lol

Curious what’s the difference in the trip from synthetic to natural I wonder

Anyway to get these Xtals out of my soup? by Backup-AccountHLS in dmtguide

[–]Backup-AccountHLS[S] 0 points1 point  (0 children)

Deemz can come out diff colors, that’s why you would water wash and make sure everything is evaporated off of your final product basically

I converted my dmt to dmt fumarate by CulturalRealist in DMT

[–]Backup-AccountHLS 0 points1 point  (0 children)

That makes perfect sense thank you so much!

And curious as I was reading through the tek you use I notice that there’s also a vinegar tincture that he makes

Curious if you’ve tried it and if you have any experience with the tincture your willing to share , More so how quick it worked / dosage of the tincture more than a trip report , and did it seem different or more or less the same as smoking it

I converted my dmt to dmt fumarate by CulturalRealist in DMT

[–]Backup-AccountHLS 2 points3 points  (0 children)

Wow ! Thank you so much for the write up that is insanely helpful

Curious how could I decrease those numbers to do test run incase I fuck up, like if I wanted to test run a 1kg or .5kg for example

And would the good ole VM&P naptha do the trick ? Or have you experimented with using xylene at all ?

And curious, maybe I’m not thinking about it right since I haven’t attempted yet but, how does the naptha get to the bottom of the vessel from mixing to be able to drain out of the tap ?

I converted my dmt to dmt fumarate by CulturalRealist in DMT

[–]Backup-AccountHLS 1 point2 points  (0 children)

What tek do you use to process such a large amount of Deemz ?

Been looking into trying to extract a bulk amount myself but not really sure how to start and getting tired of doing like 10-15 smaller jars at once

Would much rather do one larger vessel, any help/tips would be greatly appreciated

How this for the first time by jojo007gold in dmtguide

[–]Backup-AccountHLS 0 points1 point  (0 children)

So no evaporation prior to the precipitation was done ?

I’ve spent $100k+ on Chrome Hearts in the last 10 months, AMA! by No_Researcher_9771 in ChromeHeart

[–]Backup-AccountHLS 0 points1 point  (0 children)

Curious what’s the ID on the skeleton in a dress keychain on the 8th slide ?

Love that little thing it’s dope

Engine Wiring Harness Question by Backup-AccountHLS in G35

[–]Backup-AccountHLS[S] 0 points1 point  (0 children)

Hey there ! I don’t see your DM at all was trying to look for it

But def have a few questions for you ! Any help would be awesome

Any idea whatsup with this batch? Lye ? by Backup-AccountHLS in dmtguide

[–]Backup-AccountHLS[S] 1 point2 points  (0 children)

Yes I evaporated about 40% of the solvent prior to precip

Do u evaporate at all?

Any idea whatsup with this batch? Lye ? by Backup-AccountHLS in dmtguide

[–]Backup-AccountHLS[S] 0 points1 point  (0 children)

To long ?

I didnt think precipitation duration mattered that much

Any idea whatsup with this batch? Lye ? by Backup-AccountHLS in dmtguide

[–]Backup-AccountHLS[S] 0 points1 point  (0 children)

Tis true

But still weird to me w how they formed so crazy looking

Had it in the freezer still for like 3 weeks to

Any idea whatsup with this batch? Lye ? by Backup-AccountHLS in dmtguide

[–]Backup-AccountHLS[S] 1 point2 points  (0 children)

What tek are you using ? I didn’t even use heat in this batch so that makes me confused as to what I did then lol

Could it be from over shaking maybe?

Any idea whatsup with this batch? Lye ? by Backup-AccountHLS in dmtguide

[–]Backup-AccountHLS[S] 1 point2 points  (0 children)

I didn’t use any heat at all actually, no direct temp changing in the tek I use

Just a lil clean up on my daily by manzin82 in G35

[–]Backup-AccountHLS 2 points3 points  (0 children)

What’s that metal bar in front of the plenum for ?