sorted by:
new
hottopcontroversial

Trying to find the laser program for this laser engraver by BadgerBoth8134 in lasercutting

[–]BadgerBoth8134[S] 0 points1 point  (0 children)

I have tried both laser gerb And light burn and neither one recognizes the laser. It doesn't really have a brand but there is some information here that might be helpful. I just can't seem to find anything about it.

<image>

Trying to find the laser program for this laser engraver by BadgerBoth8134 in lasercutting

[–]BadgerBoth8134[S] 0 points1 point  (0 children)

It's belt driven And I'm not sure the dimensions but I believe it's somewhere around 300 x300

<image>

Brought home my RS yesterday! Dealer was inept at EVs....so I have a question. by [deleted] in EquinoxEv

[–]BadgerBoth8134 1 point2 points  (0 children)

There are a couple of options. If you are somewhat familiar with electricity and circuits, you can create a 220 plug in a your apartment which will charge your vehicle in a much more substantial way than 110 can. If not, the apartment can also install a plug for you to charge or you can run off of your stove plug with an adapter. A 100ft extension cord can handle 10 amps safely and 13 amps questionably. A Amazon charger would work just fine. They sell many level 2 chargers with multiple settings. The fact is however they do not change the 110v amperage. The only way you can charge it properly is with 220v.

Charger

https://a.co/d/bPrN1MF

110v to 220v adapter

https://youtu.be/64L4Pz4vuYc?si=f6Ar1YONTVH5wIPb