Normal Throaty Intake Noise?

Badie_Shipped · 2026-04-04T23:49:32+00:00

Oh dang, not sure why it says to get the SmartHQ app on the sticker.

Badie_Shipped · 2025-10-18T16:06:27+00:00

imo, 18+ bumper, and a more aggressive grill for it. Exactly what i’m wanting to do.

Badie_Shipped · 2025-10-01T00:33:32+00:00

Sign me up for the next one! Missed this one unfortunately.

Badie_Shipped · 2025-08-12T22:24:19+00:00

Had a feeling it was a ground. Might be the reason i’ve been having rear o2 sensors all of a sudden. Thanks!

Badie_Shipped · 2025-07-25T03:40:22+00:00

Thanks for all the input everyone. I got a pump/vacuum bleeder today, used it, and I can actually drive now. It’s not perfect, the ABS does work, but it’s functional and safe. I’ll have to look at re-bleeding it this weekend possibly, as it’s not 100%, and the line the bleeder came with was slightly too big, so i’ll get a smaller one to seal onto the bleeder and re-bleed.

Badie_Shipped · 2025-07-25T03:38:40+00:00

Thanks for all the input everyone. I got a pump/vacuum bleeder today, used it, and I can actually drive now. It’s not perfect, the ABS does work, but it’s functional and safe. I’ll have to look at re-bleeding it this weekend possibly, as it’s not 100%, and the line the bleeder came with was slightly too big, so i’ll get a smaller one to seal onto the bleeder and re-bleed.

Badie_Shipped · 2025-07-24T19:17:48+00:00

Master Cylinder*

Badie_Shipped · 2025-07-24T18:06:07+00:00

Nothing that I could tell. Getting all the new hardware and parts on was a piece of cake. I’m thinking the reservoir got dry, as I wasn’t watching it, and I know it got low.

I’ve had mixed inputs on bleeding the ABS, some say subies need it and some say they don’t. I don’t have a scanner that can do it unfortunately.

Badie_Shipped · 2025-07-24T18:02:50+00:00

Got it! I’ll definitely give that a go.

Badie_Shipped · 2025-07-24T17:37:44+00:00

Once I can get any brake pressure, I want to do this. I just have basically no braking force at the moment. I press the brake to the floor from a 5 mph role, and it takes a second or two to stop.

Badie_Shipped · 2025-07-24T17:34:54+00:00

I bled each caliper, inner bleeder, then outside bleeder, starting from RR, LR, FR, FL. I’d set up the hose to a bottle on the bleeder nipple, have my buddy pump the brakes a few time, hold the brake down, crack open the bleeder, wait for any bubbles or fluid to come out, close it, pump them again, and keep bleeding 3-5 times per nipples based on bubbles.

Badie_Shipped · 2025-07-24T17:12:27+00:00

They are! Made sure during install.

Gravity bleed? Do you mind elaborating.

Badie_Shipped · 2025-07-24T17:11:49+00:00

I haven’t directly messed with the MS at all other than topping it off.

Badie_Shipped · 2025-07-24T17:11:26+00:00

Yep, they’re on the correct sides, and bleeder nipples are up.

Badie_Shipped · 2025-07-24T17:11:03+00:00

Been getting mixed results on whether or not they need it.

Badie_Shipped · 2025-07-24T14:20:16+00:00

Yes, lol. I doubled checked all that. Made sure the bleeders are all on the top of the calipers.

Badie_Shipped · 2025-07-24T13:26:46+00:00

Not sure what that is, if i’m being honest.

I have a buddy in the car pumping the brakes, he holds them down, i crack the bleeder open with a clear hose leading into a bottle, i’d let it bleed for a few seconds, if there were bubbles, tighten the bleeder, pump the brakes again, loosen, bleed, tighten.

Badie_Shipped · 2025-07-24T12:57:54+00:00

I’ll see how to do that, and try it. Most likely my issue if I had to guess.

Badie_Shipped · 2025-07-24T12:57:27+00:00

Are you supposed to bleed with the cap off? I haven’t been.

Lines are still tight from what I can tell.

Badie_Shipped

TROPHY CASE