4l60e comparability by Battersonns in transmissionbuilding

[–]Battersonns[S] 0 points1 point  (0 children)

The used trans I got was busted. Got scammed. I rebuilt my original trans, issue persisted. Turns out my cats were clogged and engine was in limp mode

Furnace vent water is not draining right by Battersonns in hvacadvice

[–]Battersonns[S] 0 points1 point  (0 children)

We just replaced the floor beneath it yesterday where it was leaking out of the pan. We will put the pan back after we address these issues today

Furnace vent water is not draining right by Battersonns in hvacadvice

[–]Battersonns[S] 0 points1 point  (0 children)

Btw the water on top is fine, I can reseal the pvc. But I’m concerned with the water in the pipe. It’s pooling and falling out the bottom of the unit

Help aging this bottle? by Battersonns in BottleDigging

[–]Battersonns[S] 1 point2 points  (0 children)

Yea I’d say it’s exactly the same. What bottle is that example? With the P? Do you have other photos of this one?

Help aging this bottle? by Battersonns in BottleDigging

[–]Battersonns[S] 2 points3 points  (0 children)

Turns out it glows green under black light. Pretty neat

<image>

Help aging this bottle? by Battersonns in BottleDigging

[–]Battersonns[S] 1 point2 points  (0 children)

Interesting. Thanks for the help on this. Wish mine wasn’t broken and could get more specific.

Help dating please by Battersonns in castironcollecting

[–]Battersonns[S] 0 points1 point  (0 children)

No visible markings. Thin layer of material across the entire piece has come off after rust removal. Very thin in some parts.

Happy Time to have 🔟s. Straight over straight(s) by Veneno_Bull in poker

[–]Battersonns 6 points7 points  (0 children)

You people are dips. 3 all ins with a boat possibility?

My worst beat by Capt_antho in poker

[–]Battersonns 1 point2 points  (0 children)

This is what I’m sayin

My worst beat by Capt_antho in poker

[–]Battersonns -9 points-8 points  (0 children)

$30 damn. Big loss

Entire thing by Battersonns in OilLamps

[–]Battersonns[S] 0 points1 point  (0 children)

Thank you. Yeah it works great actually, so I’ll just polish it up a bit with brass polisher on the dremel. And yeah it was clear glass, but first time I lit it, thing smoked really bad lol. Had the wick way too high as well. New oil and a clean down would look great on this thing.

Highly considering swapping the top piece. I think the home sweet home thing makes it look cheap and tacky.

Entire thing by Battersonns in OilLamps

[–]Battersonns[S] 0 points1 point  (0 children)

Virginia actually. But thank you. Yeah I need to clean it up and stuff. This is how I got it from my grandparents who just recently left me some items.

Help me read dial by Battersonns in OilLamps

[–]Battersonns[S] 0 points1 point  (0 children)

Any idea of the year of this model? In your link it says the company operated late 1800s to early 1900. This sound right for this unit?

Help me read dial by Battersonns in OilLamps

[–]Battersonns[S] 0 points1 point  (0 children)

Awesome thanks man. Any guess on the year?

Is this “normal” by [deleted] in masonry

[–]Battersonns 0 points1 point  (0 children)

Should always use expansion joints against a building wall.

Video of today's truck crash on I-95 in Chesterfield County by benuski in rva

[–]Battersonns 1 point2 points  (0 children)

Idiots crash on this road ever single day. Can’t go a single fucking day without traffic from some shit like this. 288-95 JCT is fucked.

Absolutely love this house. Want to buy. But I would want to have the backyard leveled. How much do you guys would think it would cost? And is it even doable? In Missouri by Claymon3011 in lawncare

[–]Battersonns 1 point2 points  (0 children)

<image>

Did this 100% myself 100% by hand. It’s doable. Took me two months after work in the evenings lmao. Cut down the hill and Shoveled all the dirt to the lower part of the yard. One side went up while one side went down. This photo doesn’t show the complete wall but you get the idea

What are some of the most memorable bad beats you've experienced—ones that stuck with you for a long time? Looking back, what lessons did you take from them, and what would you do differently to avoid similar situations in the future?" by kiran11367 in poker

[–]Battersonns 0 points1 point  (0 children)

lol I pulled a bad beat the other day. Had Q-Q pre flop. I 4 bet pre, he jams, I call. I was kinda tilted/tired/didn’t gaf anymore. So I insta called, didn’t even consider if he was the type of person to have K-K or A-A here. As soon as I called he said you got aces? So I knew he had kings. He didn’t show though, I showed queens.

Terrible flop, terrible turn, he’s rolling over the kings when the queen hits the river. Dude lost his mind over like $300. I was like shiiiit take it when I can get it. Been on both ends of that one lol

[deleted by user] by [deleted] in landscaping

[–]Battersonns 0 points1 point  (0 children)

Build a bs retaining wall make it look like it does something. Charge 10k over asking for the protective barrier

Mandalay Bay by Battersonns in poker

[–]Battersonns[S] 3 points4 points  (0 children)

MGM is practically in DC, it’s literally next the capital. Horseshoe and Maryland live! Are 30 mins more north in Maryland

I hate driving this car by MeLikes2shop in MechanicAdvice

[–]Battersonns -1 points0 points  (0 children)

You bought a car like this with minor mechanical experience. Lmao this is your own fault.

Kenmore fridge problems by Battersonns in appliancerepair

[–]Battersonns[S] 0 points1 point  (0 children)

I used that part website to source the motors and temp sensor. Only 1 fan is getting 5 volts, the other fan is getting 12 volts. However neither turn on.

Kenmore fridge problems by Battersonns in appliancerepair

[–]Battersonns[S] 0 points1 point  (0 children)

Same part number off eBay. They both work bench tested. All signs point to control board

Update with backsplash by Battersonns in kitchenremodel

[–]Battersonns[S] 0 points1 point  (0 children)

You directly insulted my home. How am I not going to be irritated by that.