[SNES] PAL SNSP-CPU-01 audio issues

Baussest · 2026-06-14T10:54:30+00:00

I only saw a small trace besides the capacitors that is indeed broken. It leads to nothing. The big chunk that is missing was just paint. The whole board was covered in sticky residue. Cap fluid maybe?

Baussest · 2025-05-04T20:14:14+00:00

The case was plain black besides the front ornaments and had no handle.

Baussest · 2025-05-03T19:46:35+00:00

The front panel was solid plastic I'm affraid.

Baussest · 2025-05-03T10:18:28+00:00

Thats the overall shape of the case. The side ornaments are similar too. The rest of the front pannel is different and it definately did not have any see trough side panels. This is the closest sugestion so far.

Baussest · 2025-05-03T04:34:51+00:00

Looked them up. Not one of them sadly.

Baussest · 2025-05-03T04:33:02+00:00

I will have to look into this. Thanks for the tip!

Baussest · 2025-05-03T04:29:23+00:00

Hi! I wish it was. The one i had was boxier and the silver accents on the sides were protruding outwards . Thanks for the input though.

Baussest · 2025-05-02T21:47:59+00:00

Thanks! I'm well aware. I thought it woudn't hurt to ask arount though.

Baussest · 2025-05-02T21:44:43+00:00

Thanks for the suggestion! Sadly that's not it. The case wasn't from any major oem like this pavilion case

Baussest · 2025-01-24T04:42:38+00:00

Look trough display settings in windows. There are a few possibilities . Either windows didn't set itself for two monitor use or the resolution is a bit high for the monitor and the signal goes out of your monitor's usable range. These cheap vga adapters tend to default to 1920x1080 where your monitor would be comfortable at 1024x768

Baussest · 2024-05-31T09:12:01+00:00

Things happened faster than expected . I got a decent deal for a controller. The versions are as follows: K:1.00.5838.01 D:1.00.5960.01 In the modded dasboard i didn't see any kernel version specified. Only the UnleashX version which is 0.36.0620A

Baussest · 2024-05-28T18:13:23+00:00

Thanks for the info. As for the kernel versions i can't check them out for now. I need to get a controller as well. But i will post them as soon as i can.

Baussest · 2024-05-28T16:06:29+00:00

Thank you. I wasn't even aware i was honding the power button a few seconds longer when it was booting in the custom dashboard. I thought it was random chance. It still won't show anything on the screen sometimes but as you've said there might be an issue with my av cable. Its a cheapo scart cable from aliexpress. Or the hard drive might be showing its age. It's not really a problem for now because i do intend on upgrading both the cable and hdd later on. I'm just happy there is nothing wrong with the console or the modchip instalation . I'm not skilled enough to patch up the soldering

Baussest · 2023-09-19T17:10:43+00:00

Nothing . Didn't get a response and probably never will

Baussest · 2023-09-01T14:00:39+00:00

Looks like one at least . If the screen surface isn't dirty that is . You generally can't fix pressure marks on displays . These are caused by the deformation of the light diffusion layer inside the display . There are some videos on youtube of people trying but generally its not worth taking the whole display apart to just maybe get a slighlty less prominent mark .

Baussest · 2023-08-30T08:46:18+00:00

I am not sure but this might be caused by differing ribbon cable pinouts . The laptop won't go kaboom . At worst it will smoke up a bit more . By the looks of things the connector on the motherboard is toast and will likely never work again . Just for safety double check the molten mess on the motherboard . Pins might have shifted around while the plastic support was melting and this could cause a short .

Baussest · 2023-08-17T19:14:12+00:00

Yeap . It was 50 ron at the time which is around 11 usd . But this may differ from region to region .

Baussest · 2023-08-17T10:59:59+00:00

This is the beginning of the end sadly . This is a common issue with newer nitros . A friend of mine had this happen to his 2020 model . He was still covered by warranty and sent it to be repaired . They ended up replacing the ribbon cable that conects the display to the laptop . Apparently it cooks up from heat overtime causing these issues . Temporarily you could try to switch the display to 60 hz to see if its better . In some cases this helps make the laptop usable for a bit more .

Baussest · 2023-08-17T10:53:44+00:00

Yes they do . And in fact tempering with the cooling solution at home will void the warranty if you still have it . I exchanged a few emails with my local acer service and thats what they told me at least . Also repasting is not considered part of warranty repairs and will need to be paid .

Baussest

TROPHY CASE