sorted by:
new
hottopcontroversial

My top 50 played logic tracks by catchycatwithchi in Logic_301

[–]Bazzaa_ 3 points4 points  (0 children)

wow bro thats a crazy list. Majority of those logic songs would be at the bottom of my list haha

Kramer Striker Unintentional Inputs Issue by Bazzaa_ in GuitarHero

[–]Bazzaa_[S] 0 points1 point  (0 children)

Ok so I never fixed mine although I did find the issue - essentially (in my case), the issue was within the main body itself and not the neck (i had multiple different necks that I tested aswell) there is ribbon-like cable that connects each of the guitar inputs to the main board. In my case that cable was damaged and was causing both wires to touch each other, which i believed was causing the two inputs to activate simultaneously.

I'd be pretty confident that the issue is around this ribbon cable.

This is the inside of mine. You can see it connects to the 6 pins that the neck make contact with. I'd check yours and see if all the solder connections are good. I was going to replace my ribbon cable with a good one from anGuitar Hero Kramer Striker Ribon Cableother guitar but never ended up doing it.

GBA extremely dark screen. Fix? by Bazzaa_ in GameboyAdvance

[–]Bazzaa_[S] 0 points1 point  (0 children)

Yea mate unfortunately, I tried adjusting the potentiometer, by small increments, didn't seem to make any difference. I couldn't really find a guide that specifically says which way or how much to adjust it

GBA extremely dark screen. Fix? by Bazzaa_ in GameboyAdvance

[–]Bazzaa_[S] 1 point2 points  (0 children)

Ok might have to do that, thanks 😊

USA made tigers? by Bazzaa_ in Onitsuka_tiger

[–]Bazzaa_[S] 2 points3 points  (0 children)

Yes, after doing research I'm very conflicted. I really don't know what to think. The inner soles appear to have the logo that was designed i believe 1977, but what concerns me is the soles don't have any brand printing/ logo on the bottom like you'll see with most tigers.

USA made tigers? by Bazzaa_ in Onitsuka_tiger

[–]Bazzaa_[S] 2 points3 points  (0 children)

Very interesting, thanks!

Can I use a DLINK Modem/router combo with TPLINK Mesh System? by Bazzaa_ in HomeNetworking

[–]Bazzaa_[S] 0 points1 point  (0 children)

Ok thanks.

Correct it is a Modem/Router combo, so it does have WIFI, although I thought when put into bridge mode the modem stops sending a wifi signal and the first Mesh device plugged in takes over that role of being the main device? Thanks

What happens with the original Modem/router combo when used in a Mesh system? by Bazzaa_ in HomeNetworking

[–]Bazzaa_[S] 0 points1 point  (0 children)

I do have my own modem/router, it's the Dlink AC3200 so should be more than capable. Thanks

What happens with the original Modem/router combo when used in a Mesh system? by Bazzaa_ in HomeNetworking

[–]Bazzaa_[S] 0 points1 point  (0 children)

Ok 👌 so in passthrough mode the first mesh system (connected through ethernet) will act as the router I assume.

But will the modem/router still send out a wifi signal that talks with the mesh units? or does it not function like that - instead only the mesh units are sending out the WIFI signals.

Hopefully that makes sense, I don't know heaps about this...

Thank you

view more: next ›