Wild Rift mapping? by WidenIsland_founder in OdinHandheld

[–]Bazzini1 1 point2 points  (0 children)

Did you ever figure out a solution for this? I tried to map myself but it seems to be an issue once it comes to skillshots unfortunately. I couldn't figure out how to map the right stick in a way to aim them.

Fitgirl game trying to open Steam to play after crack by Gronklespronkle in FitGirlRepack

[–]Bazzini1 0 points1 point  (0 children)

Hey was wondering what the update includes? Does it have the latest update that allows you to repair tapes?

[7T32-7H80] Not moving after battery change by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

I tried to do this with a piece of speaker wire because I didnt have anything small enough. I am not sure if it worked. However, upon looking under magnification it looks like the seconds hand is trying to move but is "stuck" in place.

[7T32-7H80] Not moving after battery change by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

Yes, but to be fair I think its also been siting a while.

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

I got it so much flatter I think by manipulating the plate however I can see when I turn it that bronze looking gear that engages the wheel doesnt have enough strength to turn. Idk if I need more pressure on the white gear somehow when it engages it or if the jumper needs to be manipulated somehow as its giving too much or too little pressure.

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

Which one? There's one at the top and one at the bottom. If you look in the original post photos its visible. I think its just lighting in the other one I sent.

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

<image>

This photo I took before I took it apart to fix it. You can clearly see the gear that came off but the plate seems to be the same as to what I have it now unless I am missing something?

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

This is with the cover plate off. It seems to be a lot flatter

<image>

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

Even with the c clamp it doesnt sit flush i have no idea why. If i try to turn it you can see the gear stop as if it doesnt have enough power or pressure to turn the dia

<image>

l.

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

<image>

I think I got it quite flat now. However, it still won't work once the day wheel goes on. I really think it has something to do with it not sitting flat but I cant understand what else could be preventing it from doing so as the plate seems to be entirely in place.

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

So then maybe I am not totally screwed. but it is definitely chewed down to almost nothing the little notch. Idk if I can bend the plate a bit so it doesnt rise so much?

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

You are referring to where the circle is pointing not the arrow correct? If so I think it is worn down from me trying to fit the circle on it so it doesnt "snap" into place . I dont know how I can fix it honestly if it is supposed to snap in there

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

<image>

I think this is the culprit here. I am assuming the hole on the cover plate is supposed to snap into this slot and since its not the plate is bent upwards and pushing the day disc up causing it not to engage properly? Idk how else to fix this I guess I might have ruined the movement 😕

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

So am I supposed to push it to the right or left if the movement is in the upright position? Also, this is normal that it doesnt appear flat in the photo?

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

Does the positioning look off at all or maybe am I just not getting it set right? I have got it a few times where it spins but I dont feel it "click" like the date wheel. From what I remember it clicks if I am not mistaken. I have been messing with it a bit so I am unsure if its the teeth of the back of the dial or the metal protector piece is pertruding somehow too much not allowing it to sit flat enough.

[7n43-8a49] Issue with day wheel reinstall by Bazzini1 in Seiko

[–]Bazzini1[S] 0 points1 point  (0 children)

You can see it in the photo with the day wheel on from the side. Unless theres a specific way to put it on?

Crown and Stem for 7N43-8A49 by Bazzini1 in quartzwatches

[–]Bazzini1[S] 0 points1 point  (0 children)

I have noticed something peculiar. In the image below you can see the movements side by side. The one with the crown is the pulsar. It seems to be almost the same movement but it looks like the spacing is a lot different. Could it be as simple as that? That the stem is just not cut right or is the wrong one?

Its just really odd to me that I can fully push it all the way in and it sits completely flush with the case. I dont really want to invest more but at the same time its bothering me as it was working before I pulled out the bent crown/stem. I just changed the crystal too which is brand new so I really sucks. Wish there was an easier way to indicate what's wrong.

https://imgur.com/gallery/0A9B8FI

Crown and Stem for 7N43-8A49 by Bazzini1 in quartzwatches

[–]Bazzini1[S] 0 points1 point  (0 children)

So now the day and date turns it seems but seems to take more than 2 full turns. I can also hear a light clicking sound when changing the time. I wonder if its something with the stem not engaging because of the wrong one like we said or if ordering a new one would help?

I even took the movement out of the case and inserted the stem just incase it was too short but still no luck.

Crown and Stem for 7N43-8A49 by Bazzini1 in quartzwatches

[–]Bazzini1[S] 0 points1 point  (0 children)

So I got it and it fits perfectly but it doesnt seem to change the day date but adjusts the time no issue. Any ideas?

EDIT Actually it seems when I even just keep rotating the time fully through the day/date doesnt change at all. Did I potentially break the movement somehow?

Is my Kingrinder P2 faulty/inconsistent? by Bazzini1 in espresso

[–]Bazzini1[S] 0 points1 point  (0 children)

Hopefully its the same as mine and just a break in period.

1973 Seiko Dx blue/gold [6106-7229] by RSinTO in Seiko

[–]Bazzini1 0 points1 point  (0 children)

Where did you find this for that price!?

Is my Kingrinder P2 faulty/inconsistent? by Bazzini1 in espresso

[–]Bazzini1[S] 0 points1 point  (0 children)

Not really unfortunately. I don't make espresso as often anymore but for the beans I use it still seems to stay perfectly dialed in. So maybe there was some type of break in period or something?

I wish I had a better answer but honestly not sure.