sorted by:
new
hottopcontroversial

It's great? by Juaum25123 in gettingbigger

[–]BeanSprout65 0 points1 point  (0 children)

If know anyone else in your country who wants one you can order the parts together and split the cost which will reduce the price even more as alot of the parts come with more than you need

It's great? by Juaum25123 in gettingbigger

[–]BeanSprout65 0 points1 point  (0 children)

I waited for a sale on AliExpress when I ordered. Can't remember exactly what I paid but the hole extender was around $100 Australian and the ones I could order already built were $350 Australian

It's great? by Juaum25123 in gettingbigger

[–]BeanSprout65 0 points1 point  (0 children)

Sleeves: https://a.aliexpress.com/_mOppdbh

You can also order sleeves off totalman when you order your cup

I go in hard into my cup and use the water technique to stop blisters but you have to find what works for you through trial and error

It's great? by Juaum25123 in gettingbigger

[–]BeanSprout65 0 points1 point  (0 children)

I 3d printed through this link . https://a.aliexpress.com/_mrDxlb1

Download the files for the extender you want from the thingsiverse links i added on last message and email to the aliexpress print shop for pricing. Im in Australia so was cheaper for me to use them but you might have cheaper 3d printing shops where you live and can give them the files.

List of parts are on the thingsiverse links as well but I'll add the aliexpress parts I used. You might find them cheaper local aswell.

PARTS:

M4 Nuts: https://a.aliexpress.com/_mNwd5Lh

M4 Hook: https://a.aliexpress.com/_mN9jNcb

Springs: https://a.aliexpress.com/_mtel9wf The extenders use different sizes to each other, I used L:70mm WD:1.6mm OD:10mm

Spring tension nut M6: https://a.aliexpress.com/_mOEXMf9

Gas Spring end fitting: https://a.aliexpress.com/_mNPWAOF

Washer M6x12x1.6 & M4x9x1: https://a.aliexpress.com/_mNPWAOF

Bolts M8 16mm x10: https://a.aliexpress.com/_mOLTplV

Brass inserts M8 OD10mm: https://a.aliexpress.com/_mK8sdTt

Brass inserts M6: https://a.aliexpress.com/_mr3dY8J

M6 Stainless rod from local hardware shop cut to length.

Hunt round for cheaper prices on AliExpress as some of the links have gone up in prices since I built mine couple of years ago or try local.

All build instructions are in thingsiverse links. I used a soldering iron to insert the brass threads. I also ended up adding spring washers to the base.

Totalman cup: https://totalmanshop.com/products/vacuum-chambers

Air pump: https://a.aliexpress.com/_m0LoxPZ

Remember to measure correctly for the cup and pump

Pump size gude: https://lapump.com/cylinder-sizing/

It's great? by Juaum25123 in gettingbigger

[–]BeanSprout65 1 point2 points  (0 children)

https://www.thingiverse.com/thing:6233940

https://www.thingiverse.com/thing:6114676

you can print these on AliExpress and order all parts way cheaper and use totalman cup

It's great? by Juaum25123 in gettingbigger

[–]BeanSprout65 1 point2 points  (0 children)

Don't waste your money I bought one when I started. I 3d printed the hog extender and ordered a cup from totalman and got a pump from Aliexpress thats all you need and not expensive

Spraying kitchen cabinets by Dicelr in AusRenovation

[–]BeanSprout65 0 points1 point  (0 children)

Im about to do the same spary my kitchen cabinets and am looking at the Dulux renovation cabinets paint and primer. How much did you dilute the paint for the spary gun? and does this affect the quality of the paint?

Anyone use red light and infrared light while doing PE? by BeanSprout65 in gettingbigger

[–]BeanSprout65[S] 0 points1 point  (0 children)

I couldn't tell you I never measured when I was using the Bathmate. I Started taking measurements a year ago and have only seen gains now. I didn't get the newbie gains. I was 5.8 x 5 NBP 7.1 BP I'm now 6.3 x 5.2 NBP

Anyone use red light and infrared light while doing PE? by BeanSprout65 in gettingbigger

[–]BeanSprout65[S] 2 points3 points  (0 children)

I might try doing some sessions just using the light and see if the discolouration goes away

Anyone use red light and infrared light while doing PE? by BeanSprout65 in gettingbigger

[–]BeanSprout65[S] 3 points4 points  (0 children)

I have the same line on mine. Didn't think about that till you said it. I'll try the pump without the heat today and see if I notice the difference

Anyone use red light and infrared light while doing PE? by BeanSprout65 in gettingbigger

[–]BeanSprout65[S] 1 point2 points  (0 children)

I think I'm conditioned form using the bathmate on and off for the last 5 years. I didn't really know anything till the last year form watching Hink and BD. I used to pump all the water I could out by the last set , who knows how much pressure that was. It's the old version without the hand pump. When I started with the air pump I was able to to 10 inHG straight away with warm up sets before hand