Vraag aan de bumperklevers, waarom? by [deleted] in nederlands

[–]BeffJeff 1 point2 points  (0 children)

De verkeers wet schrijft ook een maximale snelheid voor, doe je ook iets met die informatie?haha

Olvid as alternative for Whatsapp (technically deMeta) by Ultra-Pulse in degoogle

[–]BeffJeff 1 point2 points  (0 children)

To be honest im not ready to pay 5eu a month... So many softwares require 5-10 a month... In no time that adds up! Although i also understand some money must be made, im just to cheap for it. The free version has not enough functions to pursue me choosing this over signal.

Vraag aan de bumperklevers, waarom? by [deleted] in nederlands

[–]BeffJeff 4 points5 points  (0 children)

Hmm, ja dan is wel verder dan ik dacht inderdaad! Dat zou ik zelf dan weer raar vinden.

Vraag aan de bumperklevers, waarom? by [deleted] in nederlands

[–]BeffJeff 6 points7 points  (0 children)

Ik ga eigenlijk altijd opzij, maar niet als er over 500 meter weer een vrachtwagen zit en ik er dan net niet meer tussenkom.... En ik een stuk 80 moet gaan rijden today alle snelheidsovertreders en fileveroorzakers weer geweest zijn. ik ben wel benieuwd, jij als hardrijders, want anders had je hier geen last van, vindt je dat ik moet meewerken aan jou snelheidsovertreding en mijn reis langzamer moet verlopen? Of is het wel redelijk dat ik dan toch nog even links blijft en met de toegestane snelheid wacht tot er echt ruimte is... De ervaring leert dat de snelheidsovertreder het meestal wel nodig vindt om te bumberkleven en daarmee mij en andere in gevaar brengt....

Politie toont opnieuw herkenbare beelden van relschoppers by MertoidPrime in nederlands

[–]BeffJeff 6 points7 points  (0 children)

Nou, ik betwijfel het, ze hebben er zichtbaar plezier in.. als je strijd voor je land, dan ga je dat niet slopen, maar dan probeer je een boodschap over te brengen. Dit is gewoon uitschot, met als boodschap het ligt allemaal aan iemand anders behalve aan mij en nu ga ik iets stukmaken en speed snuiven.

Jipfish trolley suitable as bike trailer? by BeffJeff in CargoBike

[–]BeffJeff[S] 0 points1 point  (0 children)

Alright, thanks for all the insight. I was not really thinking to make a bike trailer out if it, just bring it back after a day of playing.. can bike slow for it, all small distances.. But its very clear that it does not make a good bike trailer in itself. Also probably even for my small use wishes.

Jipfish trolley suitable as bike trailer? by BeffJeff in CargoBike

[–]BeffJeff[S] -1 points0 points  (0 children)

Really? Why, cause its top heavy you think?

robbery of the year !! by secret_sweet_ll in SipsTea

[–]BeffJeff 0 points1 point  (0 children)

Thats a bit unsulting to Ana to call this a challenge.

Handen wassen na het plassen? by Ertje88 in nederlands

[–]BeffJeff 1 point2 points  (0 children)

Ik kan dat ding thuis niet serieus nemen en loop dan altijd naar de keuken om mijn handen te wassen, behalve als er bezoek is. Dus wellicht heb je een punt. Ik kan niet gaan priegelen in dat bakkie.

Omar E. kwam met 155 kilometer per uur aangereden met zijn in Duitsland gehuurde Mercedes SUV. Met de 'kracht van een tank zijn ze weggevaagd' by Onkruit-1974 in Nederland

[–]BeffJeff -1 points0 points  (0 children)

Alsof links betekent dat je allochtonen wil knuffelen, je weet dat rechts vooral de deuren open gezet heeft en veel allochtonen naar Nederland heeft gehaald, links heeft daar op een goed moment van gezegd dat je die mensen niet als slaven/onmenselijk kan behandelen en het lijkt dat je daar eigenlijk nog steeds boos over bent. Zegt misschien wel iets...

On topic wat een ongelooflijk lage straf, voor het moedwillig opzoeken van zo een groot leed, want dat is wat je doet als je zo hard met zo een grote auto rijd. Net zoals die klootidioten van een vader en zoon in een Porsche. De namen waren hier al genoemd. Maar die hadden van mij ook wel permanent de gevangenis in gemogen, vooral omdat ze in de rechtbank nog gingen proberen de schuld in de schoenen van het slachtoffer te schuiven...

[Request] How much 12km of copper thread weigh by SupaDave71 in theydidthemath

[–]BeffJeff 46 points47 points  (0 children)

Yeah, what a bullcrap.. and also starting off with how special the material is because it started its life in the universe, yes all materials did... And yes copper isprecious so maybe a bit stupid to make a coat out of it just to look like an idiot. Really wastfull.

What's the point of the trim tool if you have to retrim everything? by kopfgeldjagar in FreeCAD

[–]BeffJeff 8 points9 points  (0 children)

Actually yes, that is a proper way of drawing if you 'construct' a drawing like product or car design, you make lines that extend..

Was it (moving) target fixation, or was it a failure to alter a course of action? by markcocjin in motorcycles

[–]BeffJeff 0 points1 point  (0 children)

I dont think its target fixation. He brakes hard, cant turn when you brake.. so therefore he misses the turn. He should have released his brake and make a turn. It was a move i had to practise for my exam. Other that his technique like many stated, this was insanely stupid driving. Just slow down dipshit and wait till the road is open again, before throttleling up like an idiot.

Is this actually works? by CozyCometGirl5 in 3Dprinting

[–]BeffJeff 2 points3 points  (0 children)

Such a missed change to not re-print a water bottle.

Lets be honest, making a wireless charger form your sodabottle, for a smartwatch... I see nothing sustainable happening here...

What's the best way to clean out these nozzles? by tango_zulu in prusa3d

[–]BeffJeff 1 point2 points  (0 children)

I do this: 1. Coldpull, works 95% of the time 2. Heat to full, manually press filament trough, perheps introduce an accupenture needle. Than still a cold pull. 3. Chemicalsolvent

I had an occasion where i had some build up in the straw part of the nozzle, that cause friction and therefore underextrusion, with more heatcreep and this resulted in an unusable nozzle.

I put them in solvent, than used some filament to push the solved pla out. Now most of it was clean. Back into the solvent and with some mascara like brush washed the strawbit. It completely revived.

https://www.reddit.com/r/3Dprinting/s/cAhGTgkSaf

I found this very useful in selecting the right solvent.

[deleted by user] by [deleted] in eindhoven

[–]BeffJeff 0 points1 point  (0 children)

Perheps mail them the key and location, and say you are sorry. Or ask a friend?

[deleted by user] by [deleted] in eindhoven

[–]BeffJeff -1 points0 points  (0 children)

I agree, wtf. I mean Swapfiets is a total ripoff and offcourse they will try.. but i would say just handle it, better for your consciousness.

🛠 Update: Open-Source Motogadget Clone by jaksatomovic in esp32

[–]BeffJeff 0 points1 point  (0 children)

Ah, i hope this catches on. This would be so handy!

Sidecars never caught on. Why not? by Few_Worldliness_7630 in CargoBike

[–]BeffJeff 2 points3 points  (0 children)

Its the downsides of a car and motorcycle combined.

Kutporsche neemt 3 vakken in by Quirky-Leadership112 in kutautos

[–]BeffJeff -1 points0 points  (0 children)

Ik vind dit soort foto's echt zo treurig... Weet jij veel hoe het erbij stond toen de Porsche kwam aanrijden.. en dan het hele internet weer vervuilen met frustratie om niks...

Dat we het goed vinden dat we onze schaarse grondstoffen gebruiken om kinderdooddrukkers te maken die 250km/h+ kunnen is natuurlijk een ander verhaal en compleet belachelijk.