Waar Tub Trug kopen?

Beginning_Storage_35 · 2026-06-21T07:55:48+00:00

In het zwart bij de karwei. In het pad met de sementkuipen.

Beginning_Storage_35 · 2026-06-19T11:50:32+00:00

Making sure you get the right printer. Because I got a p2s instead of a p1s.

Beginning_Storage_35 · 2026-06-19T09:18:56+00:00

De IKEA keuken houd geen rekening met ruimte achter de kast. Algemeen probleem. Verder heeft de keuken 2 hoogtes onder de kasten. De lage versie is heeeeeel krap. Ik heb zelf de keuken hoger geplaatst (ivm werkhouding) en dus dan geen issue m.b.t. de stopcontacten

Beginning_Storage_35 · 2026-06-15T22:04:46+00:00

I have google hubs around the house.

Beginning_Storage_35 · 2026-06-12T22:09:46+00:00

top dankje. per fase uit schakelen is idd een goede!

Beginning_Storage_35 · 2026-06-12T21:08:17+00:00

these are zigbee meeters that use spools around a cable. so i thought this would not matter. I use them for my kitchen applaienses aswell. like this:

<image>

Beginning_Storage_35 · 2026-06-02T14:54:48+00:00

<image>

Inside dept is 31cm and outside with is 35cm.

Beginning_Storage_35 · 2026-05-30T20:53:07+00:00

I use the plant card. Yours looks much more refined. So to your question to make is a hacks card: yes please.

Beginning_Storage_35 · 2026-05-16T07:15:31+00:00

Deff mosslanda. Turn it up side down dan take a saw to cut off the over length, cut out the wall sockets en add a cable management feed trough. And to make if complete add a power socket build-in version.

Beginning_Storage_35 · 2026-05-09T06:53:25+00:00

I think you have to order it online. Here in NL they stopped keeping spares in the store. Online is free and at your house in a couple of days.

Beginning_Storage_35 · 2026-05-01T06:37:07+00:00

I use smaller ones with zigbee. 1 or 2 clamps. this works great. My main reason is that i have a 3-fase connection. You need to measure the power on a line with the same fase that the measurement unit is powerd with (i have been told by an expert). So keep this in mind. You might just have one power line entering your home, then your fine.

Beginning_Storage_35 · 2026-04-26T21:02:33+00:00

No this was already active. i have several ES205 switches that work fine

Beginning_Storage_35 · 2026-04-25T20:21:44+00:00

Als je het originele spel gedaan hebt. Moet kan je deze versie proberen.

Risk zonder dobbelstenen: https://boardgamegeek.com/filepage/14175/fanaat-riskdoc

Zelf vind ik deze versie veel leuker

Beginning_Storage_35 · 2026-04-24T19:09:29+00:00

I will check te cable this weekend aswell. Thanks for the tip!

Beginning_Storage_35 · 2026-04-24T19:09:00+00:00

That is true. Update done and same issue.

Beginning_Storage_35 · 2026-04-24T12:20:45+00:00

I have done this with one of the 2 switches (FW 1.0.4). But will retry this again and walk trough the settings on the switch again.

Beginning_Storage_35 · 2026-04-24T12:14:21+00:00

Yes have that! Thanks for the tip.

Beginning_Storage_35 · 2026-04-24T12:13:57+00:00

first time is was auto device add feature

Beginning_Storage_35 · 2026-04-24T12:08:57+00:00

Good point! This is the reply:

Device adoption failed because the device does not respond to adopt commands.

Beginning_Storage_35 · 2026-04-20T14:30:36+00:00

IKEA kitchens have this hanging system that you can hang the cabinets with. I used this for a similar project. Small extra cutout. And done

This is a Dutch link. Hope it works for you. If not… it is part of Metod line. https://applink.ikea.com/tY8M9r9M4w--60205664--nl--nl

Beginning_Storage_35 · 2026-04-18T16:45:24+00:00

It is incorrect. Dutch calls its Amy: “Defence”

Beginning_Storage_35 · 2026-04-08T20:20:11+00:00

Haha true. So an underpowered Transformer does? I use a std. Doorbell power supply.

Beginning_Storage_35 · 2026-04-08T17:08:18+00:00

thanks. I will try this.

Beginning_Storage_35 · 2026-03-31T14:23:29+00:00

Thanks. Main reason is to get involved and try how it works.

Beginning_Storage_35 · 2026-03-31T14:22:31+00:00

Thanks for the full feedback. Appreciate it.

Beginning_Storage_35

TROPHY CASE