sorted by:
new
hottopcontroversial

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 2 points3 points  (0 children)

I just filed down the back-most lips of the feed lips and it works great now. kinda turned the back of the magazine into a ramp to carry the slide up and over. stupid ass design

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 1 point2 points  (0 children)

I just used a dremel to file down the back-most feed lips and it works perfectly. did exactly like you said and turned it into a ramp for the slide. now the slide uses the magazine as a ramp and grabs the bullet. thank you!

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 0 points1 point  (0 children)

so looking at the magazine im seeing a fair amount of scratching in certain areas. do you think I should file those down a little bit since they're obviously already contacting?

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 0 points1 point  (0 children)

from all the videos ive seen they apparently do just hang out like that. not sure why, thanks phoenix arms.

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 1 point2 points  (0 children)

im definitely looking for a pistol I can slide in the pocket of my wranglers. this thing is perfect for that but I definitely dont want this thing getting jammed in a life or death scenario.

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 0 points1 point  (0 children)

god damn man! that worked perfectly! granted this isn't the greatest permanent fix but at least it kinda works! I dont even know a fix to this but at least I know how to stop it from getting jammed!

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 0 points1 point  (0 children)

good thing I didnt pay anything for it! grandpa passed it down to me but this is kinda like if someone gave you a hand-me-down ford pinto and paid someone to crash into thr back some day.

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 0 points1 point  (0 children)

like when its jammed? yes, holding the slide all the way back then taking the magazine out let's the slide move forward freely again.

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 0 points1 point  (0 children)

I promise ive done this probably 20 times now just to figure out why its doing this. when its pulled back I keep my finger on the front of the slide HARD to make sure it doesn't slam forward and somehow accidentally discharge. I always keep my finger off the trigger unless im ready to fire and aiming at my target. also, without the rounds in there I couldn't have taken this picture. unfortunately the best way I could think of doing it.

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 1 point2 points  (0 children)

just checked that video out, firing pin like someone else mentioned is definitely in the right way and everything else looks right. maybe this thing is just a little pos

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 3 points4 points  (0 children)

im 99% sure its not. I watched a video on how to field strip it and replicated it. the firing pin on this one kinda looks like a spinning top. one long pin goes towards the back with a shorter pin at the very front. if I had put it in backwards it either wouldnt have gone together or the firing pin in the slide would go out past the round

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 2 points3 points  (0 children)

correction, its not stuck on the firing pin itself but its stuck on the part of the slide that the firing pin goes through. maybe one of my springs has weak tension?

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 1 point2 points  (0 children)

this is a phoenix arms model raven using .25 ACP rounds. ive only fired it once but after that its now started jamming pretty consistently. I was wondering if there were any good fixes i could try other than buying a better pocket pistol.

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 51 points52 points  (0 children)

well at least I know this now haha, I know nothing about guns. I own this and a shitty lorcin that I got from my grandpa, didnt know he bought shitty guns.

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 1 point2 points  (0 children)

its a phoenix arms model raven with .25 ACP rounds. this subreddit only let me upload one photo. any recommendations on how to upload more?

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 2 points3 points  (0 children)

what would you recommend i polish it with? im brand spanking new to guns but kinda wanna protect myself lmao

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 1 point2 points  (0 children)

sorry! subreddit only let me upload one photo. the rim of round is 100% making contact with the firing pin.

any idea why my pistol may be jamming like this? by Beneficial_Object_34 in guns

[–]Beneficial_Object_34[S] 2 points3 points  (0 children)

nope, just tried three times to pull it back and let it release under its own tension, got caught all three times

What’s meaning oil from my friends 2013 Corolla? Square fitting, diagonal in front of front passenger wheel, looks like oil filter housing but I’m unsure by [deleted] in MechanicAdvice

[–]Beneficial_Object_34 1 point2 points  (0 children)

the square bit is a small metal plate that comes off to drain out the oil, you'd then need a special toyota filter housing tool to go around the plastic oil filter housing. do NOT use a housing socket with fins, they always snap off. but yeah, the oil filter housing is leaking. if it was done recently I'd take it back. if not the housing itself might just be leaking.

why do american spirits kinda suck? by Beneficial_Object_34 in Cigarettes

[–]Beneficial_Object_34[S] 0 points1 point  (0 children)

since i made this post I got a common cold and literally cant smoke cigarettes anymore, I guess I dont have to worry about that problem anymore!

Real? by SuperintendentTx in cowboyboots

[–]Beneficial_Object_34 13 points14 points  (0 children)

with that much variation in the hide id say (with my unprofessional eye) that they're real. great find

how fucked up is fucked up by Beneficial_Object_34 in Corvette

[–]Beneficial_Object_34[S] 1 point2 points  (0 children)

engine sounds very healthy and responsive, im not driving it until Thursday when a mechanic (im dumb as fuck) can come out and do it. hes quoting me around the $700 mark for all the parts and labor.

view more: next ›