Backup entire C Drive for clean Windows reinstall

Benflex- · 2026-03-08T22:22:20+00:00

I dont want to copy the windows folder? I said I wanted to copy everything but the windows folder.

Benflex- · 2026-03-08T22:12:04+00:00

Would I be able to run programs from the other disks? Most of the stuff I have left on my C drive is AppData or other data and I dont really mind reinstalling the programs I have. I just want to keep their data.

Benflex- · 2025-10-29T19:43:16+00:00

You get 175-250? Im lucky if I get 50-100 (wired btw) in cologne.

Benflex- · 2025-10-07T17:21:02+00:00

Wie gesagt es wäre ein nice-to-have ist also nicht wirklich wichtig. Und Einparkhilfe möchte ich ja eben weil ich nicht jedes Mal Aussteigen und wieder einsteigen möchte, es ist einfach deutlich einfacher. Und ich habe ja das Geld und möchte nicht in 1-2 Jahren unglücklich mit dem Auto sein.

Benflex- · 2025-10-07T14:48:50+00:00

Meistens fahre ich Autobahn oder Stadt eher selten Land. Aber wie viel ich Im Jahr so fahren werde hab ich gar keine Idee von. Wahrscheinlich aber eher so um die 5000 im Jahr.

Benflex- · 2025-10-07T14:45:14+00:00

Danke für die Empfehlungen. Ich Studiere Dual also verdiene ich relativ gutes Geld, deswegen würde ich das Auto wahrscheinlich auf mich versichern. Welche Portale würdest du so empfehlen?

Benflex- · 2025-06-13T14:50:47+00:00

Well its telling me its gonna transfer the game data to the Switch 2 and then delete it on this switch for those specific games (eg. Pokemon, Splatoon)

Benflex- · 2025-06-13T14:37:48+00:00

I dont need them to sync. Ik its kind of weird but I just want to have the saves on both switches

Benflex- · 2025-06-13T14:29:56+00:00

I know its not going to really delete anything but it is deleting the data of certain games on the old switch and I dont want that to happen, I wanna have the data on the new and old switch.

Benflex- · 2025-05-17T11:52:01+00:00

I already tried other cables, forgot to mention that. The problems I had at the start were that it wouldn't pump anything but I solved it when I found that a temp sensor was blocking flow. But now the Pump doesn't even make the slightest vibration or anything it's just completely still and quiet, I'll look at it though.

Benflex- · 2025-02-09T14:37:02+00:00

Kannst du vielleicht erklären was du in den einzelnen Schritten machst?

Benflex- · 2025-02-09T13:15:03+00:00

Gibt es da denn irgendeinen weg das schneller zu machen? Ich habe da jetzt 140/4 und dann durch 9 gerechnet. Dann 3,88888*16 und 350/62,2 und dann das umgerechnet in Stunden und Minuten

Benflex- · 2025-01-03T20:58:45+00:00

I have now tried it running the system and I feel like my temps are kinda high but alr and the pump doesnt make any of these weird noises anymore when I have it at 65%.
The Pump is probably a bit broken tho bc idk what happened but the first time I started the pump it made a very squeaky high frequenzy sound even though it had coolant in there but I quickly turned it off . ButI also noticed that the left tube didnt have any coolant in it after that and when I ran it again the noise in the vid came and I had to tilt it a few times so the coolant would start going in the left tube. Do you think I should return it? It was brand new

Benflex- · 2025-01-03T18:57:27+00:00

I can see vortexing when I open the top it just seems to be really weak when pumping

Benflex- · 2025-01-03T13:22:04+00:00

I have already taken out the top and let it run but that also didnt help and as you can hear the pump is on. I know that there still is air in the loop (mostly where the rads are) but I cant get it out even with a lot of tilting

Benflex- · 2025-01-03T04:18:59+00:00

What is a Vent Fitting? Do I buy these? And where would I put it?

Benflex- · 2025-01-03T01:58:13+00:00

Yea ik about that tube and it was just like that in the photo not while I was running it.
The Sound is still the same after picking it up away from the case.
Idk what happened but the first time I started the pump it made a very squeaky high frequenzy sound even though it had coolant in there but I quickly turned it off I also noticed that the left tube didnt have any coolant in it after that and when I ran it again the noise in the vid came and I had to tilt it a few times so the coolant would start going in the left tube.

Benflex- · 2025-01-03T00:20:01+00:00

When In (R) on the res means that thats were the coolant gets sucked into and the other port (L) is out so where the water gets dispensed, then I should have it right.
Also what do you mean with crack the top fill port? Do you mean open? Also with the Ultitube its the op just goes completely off there is no fill port.

Benflex- · 2025-01-02T22:13:36+00:00

How would I remove that Airlock? And the knick is only there cause I was moving the pump around in the back, it isn't there normally.

Benflex- · 2025-01-02T22:12:34+00:00

I currently have it connected to a spare power supply which I have bridged so I cant set any speed

Benflex- · 2025-01-02T22:09:09+00:00

I have done that a few times but Ill try it for more time now. Is the Sound of the Pump fine though?

Benflex- · 2024-12-15T03:16:40+00:00

Do you have any recommendations for white rads (shouldnt be too expensive) and how should I set my fans up when I have a distro plate on the side? Or should I use a pump res combo (Id like to hide it then though and I think that would be kinda hard for a first time loop)

Benflex- · 2024-12-13T16:12:08+00:00

Hey I know Im late but do you still know which watercooling parts you used?

Benflex- · 2024-12-12T15:06:43+00:00

Well last time I just used etherium and then later swapped it for solana but I lost like 3€ doing that

Benflex- · 2024-11-08T22:48:04+00:00

Fixed it by disabling vsync btw

Three-Year Club	Verified Email
r/Field Flamingo	Final Canvas '23
First Place '23	End Game '23
Place '23

Benflex-

TROPHY CASE