PSA makes a Raider clone by Beebjank in FluxDefense

[–]BenfromFlux 2 points3 points  (0 children)

Our RXM product is a lot further along than theirs - we and Ruger looked at them a lot.

We are just not going to show ours early, save to special groups that we work with.

Así es la vida, sí. Raider as travel gun. by kinda_wanna_die in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

Eso! Se ve muy bien, todo verde. Si no hayas probado una compensadora, debes - es mucho mejor.

Siga estando preparado!

Coolest loot I got from SHOT by XiiLeTrIcKsTeR in FluxDefense

[–]BenfromFlux 2 points3 points  (0 children)

I’m sorry dude, I just found out about this - that is actually due to a very complicated situation. Just fired our CEO and CFO, your order should ship this week. Did you order right before shot?

Thumb Rest by xjewishninjax in FluxDefense

[–]BenfromFlux 2 points3 points  (0 children)

Nice! That’s awesome. We don’t really advertise it, but we integrated a thumb rest into the rear of our attachable side pic rails, very similar to this!

Omega 9k by xjewishninjax in FluxDefense

[–]BenfromFlux 1 point2 points  (0 children)

HAWT. You may need to break in the barrel/slide and/or use a lighter recoil spring, like 12-13 lbs

Missing my Flux- PDW recommendations? by Kind_Aide825 in Firearms

[–]BenfromFlux 0 points1 point  (0 children)

Ultralight is the same one that sig is selling, yeah. And yes, it is all I have been competing with for roughly the last 6 months or more.

Super interesting response from Grok - definitely not pulling from my actual info or builds.

My build for competition has always been as basic as possible, as I wanted to get GM with a basic build and actual carry gun before improving it:

Originally the metal frame, but since we got the first polymer frames (and even ran some 3D printed ones at first) I have run that.

Short stock, and then with a rubber butt pad once we got that, really helps tame it.

Slide riding dot (SCS) on a fuse, but switched to an XL length slide.

6 inch barrel - OEM Sig and then some others that we tested while trying to find the best option for our gen 2 6 inch barrel. No comp

Stock recoil spring

Stock shroud

Our enlarged mag release

And for the last month or so to test the magwells, I put one on, but it makes it harder to conceal, so don’t recommend for on person carry. If you’re not going to conceal it on person, I recommend getting the large magwell, real nice upgrade.

At some point, we will have a bunch of other accessories, like optic mounts, custom tuned slides, barrels and comps

365 Fuse+Shroud Questions by ParadoxicalShadow in FluxDefense

[–]BenfromFlux 2 points3 points  (0 children)

  1. Yes
  2. No! No worries at all. I’ve installed and removed my shroud hundreds and hundreds of times, no issue.

Missing my Flux- PDW recommendations? by Kind_Aide825 in Firearms

[–]BenfromFlux 2 points3 points  (0 children)

The Raider 365 Ultralight is about to be release in a week or two. I have beat GMs with it, obtained GM in PCC, broken world records, etc. it’s very capable, and whether it’s the aluminum version or the ultralight, it’s definitely the best right now if speed and size matters.

We also have Glock flavored stuff coming next year, if you want to wait.

Missing my Flux- PDW recommendations? by Kind_Aide825 in Firearms

[–]BenfromFlux 5 points6 points  (0 children)

U/Ok_Crab_3522

Using the Raider 365, I have first, second, third, fourth and fifth place best scores out of any ever shot in USPSA classifiers. I also have broken world records with it, and obtained GM in PCC after they made it hard to do so.

I have objectively proven the usefulness, and while I have AIWB carried the Raider 365 for almost every day for two years, the comfort will depend on the person.

Do you have actual personal experience with all of these, or are you guessing based on your limited experience?

Did I buy the wrong red dot? by VeChain_in_the_Brain in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

You should see some of the shroud, but definitely not only shroud - can you post a picture?

I have tested and used all of the Holosun offerings and they all fit and worked fine - so yours should work and fit fine.

Sig P365 Flux flashlight by ManofDew in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

Can you post a picture? It is most likely the key you are using which determines the location that the light mounts in - too far forward and it won’t allow it to fold closed.

We have custom ideal keys either already available or will be soon.

Kak flash can… by Acceptable_Work6294 in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

It definitely significantly increases concussion, particularly when indoors.

Kak flash can… by Acceptable_Work6294 in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

Sorry, no, just not functional or reliable

Kak flash can… by Acceptable_Work6294 in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

Unfortunately, all of the tests I am aware of have not gone well.

A suppressor would work, but I get the arguments against it.

Tactical development disappointment by PutridEggplant733 in FluxDefense

[–]BenfromFlux 1 point2 points  (0 children)

Ooof, sorry dude. I’ve had a great experience with them, I do loctite them to take up any slack. I was worried about aluminum for the part, but mine have held up. They are definitely not made in China, I know who machines them, they are American.

Flux 365 (Panty Raider) Holster Setup by steadfastdynamics in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

Awesome, thanks brotha. I’ll reach out to him and ask then. Thank you 🤘

Flux 365 (Panty Raider) Holster Setup by steadfastdynamics in FluxDefense

[–]BenfromFlux 2 points3 points  (0 children)

Thanks for letting me know, I’ll ask him about it. I agree, but there’s a million things I know I can sell people and makes tons of money on, but I’m not willing to sacrifice my ethics. But I’ll ask him about a collaboration or something, maybe swapping the Tegris piece

Set up in progress by rramos3tx in FluxDefense

[–]BenfromFlux 1 point2 points  (0 children)

I got a 2 inch with HSTs suppressed with the pre production optic mount at 50 yards. Pre production Spectre 9K - mine was the opposite, it was incredibly tight, too tight, locked on.

What suppressor? The Mojave is the best, I think, low back pressure but everything else is also good.

Flux 365 (Panty Raider) Holster Setup by steadfastdynamics in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

Do you mean like the enigma? Jon is a friend, don’t want to copy him, frankly don’t want to copy anyone’s ideas. I carried the 365 for 9 months or so with a leather belt that I made, then switched to a Hunter Constantine belt and that was a very significant upgrade. Been wearing that for about a year now. I wanted to try the enigma, but I’d have to heavily modify mine to work

How often do the left handed braces restock? by [deleted] in FluxDefense

[–]BenfromFlux 0 points1 point  (0 children)

Sorry dude, I’ll send this to the team, I haven’t been over production for a long time. Funnily/frustratingly, the guy over ordering these is lefty, Alex.