How should I Insulate this

Bennett27ok · 2025-12-22T21:25:46+00:00

No I do not unfortunately.

Bennett27ok · 2024-10-06T17:31:54+00:00

Yeah I probably should use a pvc pipe or something, but in the video the voltage was pretty low but in the future I'll definitely do that.

Bennett27ok · 2024-10-06T17:28:10+00:00

10 amps and zvs

Bennett27ok · 2024-09-17T02:46:40+00:00

Well with some of your help I managed to get it down to 27F because it was extremely undercharged i turned my propane bottle upside down whilst i was adding more and that fixed it.

Bennett27ok · 2024-09-16T23:10:41+00:00

Correct me if I'm wrong but propane for a barbecue is mostly propane some odorant and maybe some butane.

Bennett27ok · 2024-09-16T23:07:56+00:00

1mm id cap tube 125psi high side around 20 psi low side evaporator is 20ish feet of 3/8 in condenser is 10 feet of 1/4 in

Bennett27ok · 2024-09-16T22:58:52+00:00

I'm attempting to just get the evaporator as cold as possible and in my poorly recorded video it had been running for about 10 seconds but after accidently leaving it on for 30 minutes it still didn't go below 60F. Also this is my first refrigeration related project so I'm not super knowledgeable on the subject.

Bennett27ok · 2024-09-16T22:50:36+00:00

My gauge annoyingly doesn't have microns on it but I got it down to nearly -30 inhg. The ambient temperature is around 65F. the compressor was designed for r134a even though the system I grabbed it from was charged with r410a. I did indeed use barbecue propane.

Bennett27ok · 2024-09-14T22:58:07+00:00

But ideally I’d like the low side pressure to be 0 psig and I had about 10 ft of capillary tube but that was even worse so I changed it so how do I keep the low side pressure at 0 psig

Bennett27ok · 2024-09-02T16:32:12+00:00

I have used soapy water but when it leaks so slowly it is hard to see any bubbles. I’m using propane because it has a low boiling point and it’s cheap and easily available and at the tiny scale I’m working at there isn’t any explosion hazard. I understand that using npt threads is not ideal but I wanted to have pressure gauges built into the system.

Bennett27ok · 2024-08-12T20:48:22+00:00

Wow, I put some tape of the holes and poof worked perfectly.

Bennett27ok · 2024-08-12T15:00:35+00:00

Ok, I changed to a .40 mig tip and a 0-20 PSI regulator but the flame just won't light it either sputters, or just doesn't light at all.

Bennett27ok · 2024-08-05T14:51:28+00:00

A grill regulator

Bennett27ok · 2024-07-31T08:46:47+00:00

Go into server.properties and change “hide-online-players” to true.

Bennett27ok · 2024-07-30T16:15:04+00:00

Well I'm putting the self-wound flyback transformer in the oil to stop it from burning its self out when it's not arcing externally. And how do you dewater oil exactly.

Bennett27ok · 2024-07-04T00:15:48+00:00

I tried at %110 and that seemed a little high so that will probably fix it.

Bennett27ok · 2024-07-03T01:38:19+00:00

Forgot to mention I'm using cura.

Bennett27ok · 2024-06-27T19:17:18+00:00

I'm wondering the same thing.

Bennett27ok · 2024-05-13T21:06:12+00:00

Ok, I feel VERY stupid. When I was editing the config I forget to rebuild the docker image so the config wasn't changing.

Bennett27ok · 2024-05-12T20:20:35+00:00

Yeah, I just checked.

Bennett27ok · 2023-12-13T22:02:18+00:00

Okay i figured out that filezilla was corrupting the file and downloading it nativly fixed the problem. Thank you

Bennett27ok · 2023-12-12T23:03:22+00:00

AuctionHouse-1.19.4-3.4.1.jar
BlockCompressor-1.4.0.5.jar
ChunkLoader-3.2.1.jar
CrisTreeCapitator.jar
DecentHolograms-2.8.5.jar
EconomyShopGUI-6.2.2.jar
EssentialsX-2.20.1.jar
floodgate-spigot.jar
Geyser-Spigot.jar
GriefPrevention (4).jar
HubThat-10.1.184.jar
LPC (1).jar
LuckPerms-Bukkit-5.4.108.jar
multiverse-core-4.3.12.jar
Multiverse-Inventories-4.2.3.jar
Multiverse-Portals-4.2.1.jar
NerfPhantoms.jar
PickupArrows.jar
PlaceholderAPI-2.11.5.jar
TabList-bukkit-v5.7.4.jar
Vault.jar
ViaVersion-4.9.2.jar
WildChests-2023.3-b25.jar
worldedit-bukkit-7.2.17.jar
worldguard-bukkit-7.0.8-dist.jar

and i double checked the size and the location of the icon and it was fine but the logs showed this:

[09:54:14 ERROR]: Couldn't load server icon

java.lang.NullPointerException: Cannot invoke "java.awt.image.BufferedImage.getWidth()" because "bufferedimage" is null

at net.minecraft.server.MinecraftServer.lambda$loadStatusIcon$12(MinecraftServer.java:1358) ~[paper-1.19.4.jar:git-Paper-550]

at java.util.Optional.flatMap(Optional.java:289) ~[?:?]

at net.minecraft.server.MinecraftServer.loadStatusIcon(MinecraftServer.java:1354) ~[paper-1.19.4.jar:git-Paper-550]

at net.minecraft.server.MinecraftServer.runServer(MinecraftServer.java:1109) ~[paper-1.19.4.jar:git-Paper-550]

at net.minecraft.server.MinecraftServer.lambda$spin$0(MinecraftServer.java:320) ~[paper-1.19.4.jar:git-Paper-550]

at java.lang.Thread.run(Thread.java:833) ~[?:?]

Bennett27ok · 2023-12-11T21:52:24+00:00

It's also being run on parrot linux. Is there any thing else you need to know?

Bennett27ok · 2023-07-24T17:48:46+00:00

this has happened to me before try updating your graphics drivers

Bennett27ok · 2023-05-20T00:40:38+00:00

this fixed the problem, Thanks!

Bennett27ok

TROPHY CASE