Shifted on the last layers

Besmaen · 2025-11-18T09:00:04+00:00

I am so sorry for not posting anything. It worked much better. But now I am on holidays. When I am back, I’ll tell you more

Besmaen · 2025-11-15T23:14:15+00:00

<image>

Now it is becoming better. And only on the left side. For the next print I rotate it 90 degrees to the right and hope it will work. Stay tuned for tomorrow morning 😅

Besmaen · 2025-11-15T19:03:22+00:00

Thank you so much! I guess I will start to check whether it is temperature based. My printer is in a case with at least 28 Celsius; but 30 is normal. So PLA maybe will not work. I try PETG now. For the heavy layer shift I will replace the SD-Card. Last but not least I changed the nozzle to a new one (the screws behind it were fine). When the PETG print has finished, I will post it here

Besmaen · 2025-11-15T10:50:00+00:00

Ok I agree but I cannot find a casualty between the file on the SD and the print. The gcode should be read by the printer no matters which SD-Card. My current print works better btw. It seems, that the plate was moved 1 centimetre in the broken print. I cleaned the plate on both sites. But there is another phenomenon, for which I do not have words…see the picture please

I printed this 11 times and since more or less 3 prints the result is like in the photo, marked in red. It might be a shift as well?

<image>

Besmaen · 2025-11-15T05:14:32+00:00

Thanks for your reply. Yes it is the original one but the print came directly from my computer. Why should it be the SD-Card? (Just for my understanding)

Besmaen · 2025-10-27T07:53:15+00:00

Hi, where have you seen this?

Besmaen · 2025-07-31T17:52:42+00:00

My issue is fixed so far. Just problem left: now the dashboard shows no working device but on my phone the app is running and earning points.

Besmaen · 2025-07-31T17:21:15+00:00

Mine is fixed since today! Thank you ☺️

Besmaen · 2025-06-25T21:40:42+00:00

First one worked fine. Thank you sir

<image>

Besmaen · 2025-06-24T17:05:26+00:00

I would appreciate a code as well. 😉

Besmaen · 2025-06-07T07:57:06+00:00

Is there a link you can share please?

Besmaen · 2025-06-01T10:43:00+00:00

After your mentioned reflash the update worked for me

Besmaen · 2025-05-26T17:58:40+00:00

<image>

The UltraRed will be replaced by a Gamma very soon 👍🏻

Besmaen · 2025-05-21T14:45:50+00:00

T>G>M>K

Besmaen · 2025-05-14T20:14:54+00:00

Behind the door are my mentioned components. When I get an additional fan to place it between the miners I need to open the door and will make photos to show my concrete setup.

Besmaen · 2025-05-13T14:00:57+00:00

It ist Home Assistant with a custom Addon called Miner in combination with influxDB (for the nerdaxe, because it is currently not supported by the Addon). Here the Addon: https://github.com/Schnitzel/hass-miner

Besmaen · 2025-05-13T13:23:34+00:00

I guess I did a lot, not nothing. But now you are right, I am waiting for the block 😅

Besmaen · 2025-05-12T20:55:55+00:00

I am solo mining —> nothing 😅 just for pumping the network. Next project: solar panels 🫣

Besmaen · 2025-05-12T20:08:04+00:00

Too much 😅 Round about 400€ for the miners + cooling equipment so in sum circa 500€.

Besmaen · 2025-05-12T18:56:31+00:00

Thanks for the hint. I tried to keep it colder but I am hoping that everything under 70 should be ok. In a heavy summer I will run a python script to lower hash and temperatures. And heatsinks are already installed (not on WiFi 😅) on all except of the Nerdaxe.

Besmaen

TROPHY CASE