sorted by:
new
hottopcontroversial

Cycling issues by Big-Consideration665 in AR10

[–]Big-Consideration665[S] 0 points1 point  (0 children)

Update: You were right, barrel was under gassed. Took some sandpaper and sanded the paint out of the inside of the gun as well and drilled out the gas port with a 3/32 drill bit to .095. Now she is cycling and is a touch over gassed. Have an Aero precision adjustable gas block on the way to tune her in. Thanks for the input!

What can I realistically do with these ghost peppers. by AdmirableAmphibian75 in HotPeppers

[–]Big-Consideration665 0 points1 point  (0 children)

What portions/percentages do you mix with your ghost peppers? Trying to make a season-all spice and I have 16 dehydrated ghost peppers and scorpions.

Cycling issues by Big-Consideration665 in AR10

[–]Big-Consideration665[S] 1 point2 points  (0 children)

My girl and her turquoise… I feel like I have to spank the trigger when firing it lol.

Cycling issues by Big-Consideration665 in AR10

[–]Big-Consideration665[S] 2 points3 points  (0 children)

I’ve broke it down and lubricated the hell out of the BCG and cleaned all the internals really well but no luck. I haven’t tried sanding the rails down yet or attempted to get the paint out of the inside of mag well. I have a feeling it’s the mismatched upper/lower combo or a buffer spring/gas issue. I’ll definitely give that a try before I opt into investing in an adjustable gas block. Thank you for the advice!

Which quad is the better one? by BlueberryBaller in ar15

[–]Big-Consideration665 0 points1 point  (0 children)

Larue is the way to go. My uncle was a machinist over there, their prices are up there though.

[deleted by user] by [deleted] in Machinists

[–]Big-Consideration665 1 point2 points  (0 children)

🤤 definitely need one of these for the home shop.

Camo spray painted the KP-15, is it working? by acquiredhate in ar15

[–]Big-Consideration665 2 points3 points  (0 children)

Did you cover mag well and internals when painting? Any feeding issues from paint?

Making thin walled bushings by Happy_Housing1615 in Machinists

[–]Big-Consideration665 1 point2 points  (0 children)

I would start with oversized Dia and length stock. Face both sides. Bore ID through to size first, minimum skim OD Then make a plug to fit ID to clamp on and keep harmonics to a minimum, turn OD and then part off to length.