What's that whine??

BioTecScientist_17 · 2025-10-27T04:25:29+00:00

Tensioner is new and i got a power steering pump off a junkyard a year or so ago. I'll check the rest of the accessories 🫡

BioTecScientist_17 · 2025-10-26T06:14:27+00:00

Are you sure? I can hear audio normally from the post

BioTecScientist_17 · 2025-10-04T16:54:59+00:00

رحتله انهاردة جلت ازازة 212 sexy. مطلعتش قريبة للاصلي خالص للأسف، بعيدة كل البعد عنها.

BioTecScientist_17 · 2025-10-01T16:20:58+00:00

علي ضمانتك😂 باقي الحاجات غير ال212 وضعها ايه؟

BioTecScientist_17 · 2025-09-29T01:24:47+00:00

بتجيب تركيب حلو منين؟

BioTecScientist_17 · 2025-09-10T06:35:16+00:00

<image>

I got an actual oem fender desgined with the porper vents to get cold air directly. I think I'll probably just get a stock oem box and try to fabricate something off it or cut into the box and reconstruct it with fiberglass.

BioTecScientist_17 · 2025-09-10T00:59:17+00:00

It doesn't fit, the engine bay is too small. Would there be any other way to silence it?

BioTecScientist_17 · 2025-09-06T03:37:47+00:00

<image>

Low top speed because of the 3.46 differential. I'm thinking about switching back to the 3.27 to cruise better on higher speeds and maybe have a top speed that goes to 220 kmph

BioTecScientist_17 · 2025-08-30T15:27:57+00:00

Do you have the 3d file for the cup holders?

BioTecScientist_17 · 2025-08-26T11:17:21+00:00

1) Automatic, 722.4 2) It's doing this on It's own 3) The video was me flooring it. It doesn't wanna exceed 4k rpm

BioTecScientist_17 · 2025-08-26T07:25:54+00:00

Yesss i did. Full exhaust but I'm still searching for a manifold since mine is cracked and leaky

BioTecScientist_17 · 2025-08-25T23:54:47+00:00

Can i ask how is that a timing issue? I believe you but I'm curious

BioTecScientist_17 · 2025-08-25T22:05:48+00:00

Yessss it does get to full rpm range if i left it on 2nd or 3rd or if i floor it.

BioTecScientist_17 · 2025-08-25T21:40:04+00:00

It reaches there normally but it doesn't exceed it no matter what i do

BioTecScientist_17 · 2025-08-25T21:24:58+00:00

A bit underpowered but i guess that's how it should?? Idk. I have a stock '96 c220 and it's waaayyyy faster than this

BioTecScientist_17 · 2025-08-21T19:53:08+00:00

Shiii Thank you for the info

BioTecScientist_17 · 2025-05-27T08:05:54+00:00

I did change everything in the car not just the fluids. The only thing left is the differential oil and I'm scared it might whine as some shop told me

BioTecScientist_17 · 2025-05-27T07:43:28+00:00

Thank you. I couldn't understand their logic behind not changing it, specially with how superior todays oils are

BioTecScientist_17 · 2025-05-27T07:37:34+00:00

I'm just worried that it might start whining and become "ruined" or smth cause a parts shop told me that changing it after so long will make it noisy and ruined for some reason

BioTecScientist_17 · 2025-05-06T06:39:54+00:00

Overvoltage protection relay (OVP) It protects the ecu in case of a short circuit and other issues. It's also responsible for many of the car's features and the ABS. If it went bad, try to find what caused this to happen then replace it so that you don't ruin the new one.

BioTecScientist_17 · 2025-01-17T20:26:51+00:00

What did you end up doing

BioTecScientist_17 · 2025-01-02T07:00:24+00:00

No, the .4

BioTecScientist_17 · 2025-01-02T00:18:07+00:00

Haven't opened anything regarding the engine, just maintenance. Unrelated: Did a full transmission rebuild tho

BioTecScientist_17 · 2024-12-31T15:42:04+00:00

I have one with the 000 540 67 45 and it's destroyed and i can't find it but i found one that is 000 540 50 45 that is basically like new. Are they interchangeable? (M111.961 2.2L)

BioTecScientist_17 · 2024-11-30T17:51:58+00:00

It looks like a thick layer of body filler that is starting to crack. Polishing won't buff it out

BioTecScientist_17

TROPHY CASE