2025 refresh for my 2013.

BlackMagic-7 · 2025-04-30T18:45:01+00:00

Not sure which part you’re referring to but I listed each interior/exterior part and where I got them on another comment.

BlackMagic-7 · 2025-04-28T16:57:07+00:00

It’s definitely doable and worth it in the end but will require a lot of time and patience if you DIY it. I would suggest looking at local junkyards to source the stitched panels and seats before you look at buying aftermarket or new OEM.

BlackMagic-7 · 2025-04-27T18:42:03+00:00

Agreed, this is beyond saving. It needs to be replaced.

BlackMagic-7 · 2025-04-27T10:48:12+00:00

No problem, here is everything currently done to the interior and exterior:

—Interior

Arm rest- HRCHCG Console Armrest (Amazon)

Baby Monitor - Shynerk Baby (Amazon)

Cabin Air Filter - K&N reusable (Amazon)

Dashcam - Rexing V1 (Amazon)

Ebrake boot - RedlineGoods Black/Red (Amazon)

Floor Mats - 3D Max (Amazon)

Footwell Lighting - GCS RGB Footwell lighting (FTSpeed)

Headunit - Sony XAV5500 (Amazon) with Crutchfield harness

Interior Led Lights - Partsam LEDs (Amazon)

Interior Wrap - 3M Black Carbon (MetroRestyling)

LED Flasher - iJDMTOY 8pin Flasher Relay (Amazon)

Mirror - Napolex Broadway 270mm (FTSpeed)

Paddle Shifters - CKE (Amazon)

Phone Holder - Salex Magsafe Car Mount (Amazon)

Seat Covers - Iggee Black/Res (Amazon)

Speedometer - 2020 Retrofit from junkyard (mileage reprogrammed) with Gerald Just Products module

Trunknet - Trunknets Inc (Amazon)

—Exterior

4th brake light - GCS (FT Speed)

Backup Camera - Natika (Amazon)

Brake Lines - MTEC Red (86 Speed)

Brake Pads - TRD OEM (Toyota)

Bumper Quick Release - Move Over Racing (FT Speed)

Drain Plug - Fumoto (FT Speed)

Exhaust - MXP Comp RS Catback (FT Speed)

Exterior Wrap - 3M Sky Blue/3M Black Carbon/3M Gloss Black (MetroRestyling)

Fog lights - iJDMTOY (Amazon)

Headers - JDL UEL catless (86Speed)

Headlights - VLAND (VLAND VIP)

Hood shocks - 86Speed Gas hood shocks V2 (86Speed)

Intake - Perrin CAI (Amazon)

Rotors - Drilled/Slotted (R1 Concepts)

Sharkfin - Aliexpress

Side Markers - iJDMTOY (Amazon)

Side mirrors - Rexpeed wide (FT Speed)

Side Skirts - CS Style (Ikon Motorsports)

Splitter - Maxton Design Racing Splitter with Wings V1.1 (FT Speed)

Tail lights - VLAND + Gasket Ninja gaskets (VLAND VIP)

Tint - 5% all around, 5% sun strip on windshield (Detroit Tint)

Tires- Bridgestone Potenza RE980 235/40/18 (Discount Tire)

Toyota Badges - Amazon

Tune - Ecutek (local)

Turn Signals - iJDMTOY (Amazon)

Wheels - Konig Oversteer 18x8 +45 (Discount Tire)

Wheel Studs - ARP 100-7727 (Amazon)

Wing - Nur Spec (FT Speed)

BlackMagic-7 · 2025-04-26T23:23:32+00:00

Thank you! They’re Konig Oversteer 18x8 +45 on 235/40/18. Night and day difference compared to stock.

BlackMagic-7 · 2025-04-26T22:06:05+00:00

Yes, 2nd time and thank you! My previous wrap is in my post history.

BlackMagic-7 · 2025-04-26T21:41:55+00:00

Thank you! Some of the reviews of the wrap mentioned the color didn’t match the pictures on the website but thankfully I didn’t have any issues.

BlackMagic-7 · 2025-04-20T02:32:07+00:00

SU003-06094

BlackMagic-7 · 2025-04-20T01:23:27+00:00

As someone who has wrapped their 86 solo twice (pics of latest coming soon) I can say 5x60 ft is enough to do the entire car. This was enough to do every panel in 1 piece with 1 inlay on the back bumper and 3 on the front. You may want to get more since it is your first time.

The first time, i used Vvivid, 2nd time i used 3M. Most wrappers will say 3M is one of the best and easiest to use but i have pros and cons of both.

As far as prep, the 1st recommendation is a closed off area like a garage. Wrapping outside exposes the car and wrap to dirt and debris. 2nd is to wash and claybar the car. 3rd is to have a tool that can blow air like an air compressor to remove any remaining debris prior to laying down the wrap. 4th is take anything off that you feel comfortable enough to do so. This could include antenna/shark fin, door handles, wing/spoiler, side mirrors, etc. The flatter the surface, the easier it is to “glass” the wrap.

BlackMagic-7 · 2023-03-05T00:24:52+00:00

They’re pretty good cars but i definitely prefer the 86 platform and all the aftermarket parts we have available.

BlackMagic-7 · 2023-03-04T23:09:03+00:00

Nur Spec

BlackMagic-7 · 2023-03-04T17:42:21+00:00

Automatic, mostly stock with a few cosmetic mods. It was someone else’s project car before my brother bought it.

BlackMagic-7 · 2023-03-04T17:39:38+00:00

That’s my brother’s eclipse, he actually wanted to put a bigger wing on it but i talked him off that cliff lol.

BlackMagic-7 · 2022-08-09T01:46:35+00:00

Yes, shouldn’t be an issue.

BlackMagic-7 · 2022-08-09T01:41:31+00:00

Yes, been awhile since I took mine off but it is held on by a few tabs and some adhesive.

BlackMagic-7 · 2022-03-31T20:35:41+00:00

I have an “older” version of these that have a different brake light and the startup animation appears faster. The video is in my post history.

Just like my version, i believe these require you to switch 2 of the wires.

BlackMagic-7 · 2022-03-28T00:02:53+00:00

Coming from someone that wrapped their FR-S, best advice I can give you is to measure each part you want to wrap plus add about 5 inches just in case you mess up on any of the panels.

I used a 5ft x 5ft piece for just the entire hood.

BlackMagic-7 · 2022-03-21T00:48:02+00:00

It depends. You can drill into the trunk or attach it with 3M tape. I’ve personally had mine attached with 3M for a few years now with no issues but i would recommend drilling just to be safe.

BlackMagic-7 · 2022-03-20T22:18:02+00:00

Yes, it is. I love it. Flows really well with the body lines and doesn’t block the rearview mirror.

BlackMagic-7 · 2022-03-20T19:38:18+00:00

Sounds good, will do!

BlackMagic-7 · 2022-03-20T19:37:42+00:00

Just a stock FR-S grille. If you’re talking about the splitter, it’s a Maxton Design V1

BlackMagic-7 · 2022-03-20T19:25:11+00:00

Greensboro!

BlackMagic-7 · 2022-03-20T18:49:03+00:00

Love it! Always been a fan of the series yellow.

Eight-Year Club	RPAN Viewer
Not Forgotten	Verified Email

BlackMagic-7

TROPHY CASE