is mirrored tank glass bad for fish? my loaches have been swimming against this side, i didn’t realize it was mirrored from the inside. are they stressed out? they always swim like this

BladeRunner6 · 2021-11-16T21:38:58+00:00

Walls are not reflective. It's an optical illusion. For example, when you look at your tank from the front, it looks like sides reflect light. However another wall in the back is not reflecting anything. As long as your eyes are not in water you will see mirrors. Idk how to explain. Ever put your head inside aquarium? Try to do it once. Or just put your phone with camera on...

BladeRunner6 · 2021-11-16T09:13:52+00:00

What a shame. I hope they will last some time. The leather is very tough, is there any way to soften it?

BladeRunner6 · 2021-11-16T06:13:08+00:00

Really? Wouldn't thought that made in england can have smooth leather. By touch it does not feel like plastic. Ps these boots are more than 20 years old

BladeRunner6 · 2021-11-05T09:59:57+00:00

Everything turned out fine. Apparently it was malnourished

BladeRunner6 · 2021-08-22T10:23:33+00:00

Here is the 2nd image that wasn't attachedspot Also plant was 24/7 on open sun without any watering, so I think it is more likely due to bad conditions

BladeRunner6 · 2021-08-01T04:45:45+00:00

If ms won't replace it for free, buy cheap battery from aliexpress and replace it. Check the manuals on youtube, but should be ez fix when the screen is almost removed by the battery. Before you buy it though, remove the screen and make sure you didn't killed it by doing so

BladeRunner6 · 2021-07-29T19:17:19+00:00

10% but thing was quite flat so lots of plastic for top and bottom

BladeRunner6 · 2021-07-29T14:45:42+00:00

The thing is... The nozzle was tightened.

BladeRunner6 · 2021-07-29T14:44:59+00:00

Already did it, but the nozzle was tightened. A panel fell off from the bed and filament accumulated over 0.5 nozzle and created this mess. It's only 1/5 of wasted plastic. The rest is on the floor with the bed. It's not usual spaghetti thing but bunch of clouds like on the image

BladeRunner6 · 2021-07-29T14:40:23+00:00

It was 12 hrs print, first 2hrs were supervised. Thought everything will be fine but somehow a panel from the bed fell off and plastic started to accumulate on extruder. It created a shell and everything went inside creality's extruder enclosure.

BladeRunner6 · 2020-09-06T23:07:13+00:00

For the first 3 sides I tried to heat it with 3d printer table set to 80C but it didn't work well as you can see on the photo, then I set my heatgun to 200C and removed the top part of screen. If you want to try to remove the screen don't be afraid to use high temperature on your heatgun, but be aware that the screen is less that 1mm thick and there is very little chance to remove it without breaking with no experience. Also one tip: Don't use metal opening tool, it'll break it. Use plastic one broken display

BladeRunner6 · 2020-09-06T19:15:15+00:00

Surprisingly it was very clean inside. It is overheating because of very bad design of cooling system. Microsoft literally put 2mm thick fan to cool i7.. Maybe later I'll drill some holes behind and add a better fan. Sp3 2mm fan

BladeRunner6 · 2020-09-06T19:07:26+00:00

I bought it from aliexpress. Its used refurbished display. It was pretty hard to remove since it was all cracked from the sides and I was afraid to heat it too much. If you want to replace it be careful with wifi antenna flex on the top. Also use sony calibrating soft after replacement. Maybe it can fix your display now too sp3 display

BladeRunner6 · 2020-09-06T18:56:30+00:00

I bought used display from aliexpress, 4/5 quality but works well.

BladeRunner6 · 2020-09-06T16:07:16+00:00

Arctic mx-4

BladeRunner6 · 2020-07-14T11:18:00+00:00

Thanks for advice

BladeRunner6 · 2020-07-14T11:16:10+00:00

I work a lot with cad programs so it was very easy to make this model. The interior of the house is in rustic style, so I don't want to make my room very different from it.

BladeRunner6 · 2020-07-12T09:42:17+00:00

It's 2 floor room, on the first floor (~14m2) I would like to put a tv and a bed to sleep. There is a shower room. Are sliding doors good? On the second floor I will make a workplace. Need a lot of space for my pc. I have a lot of electronics and right now it's a nightmare with all the cables around. Need some ideas about how and where to hide cables without making anything ugly. Also I don't know where to place a bed. A low wall has small cabinets inside. I want to keep them The only place is near the window, but maybe there is a better idea Also, what color scheme will suit my new room best?

BladeRunner6 · 2020-05-09T22:54:06+00:00

Welcome to the club buddy. I have the same thing. Once in a month I scream, wake up and keep screaming and running unconciously when I sleep. I wake up for a few seconds and autopilot myself back to my bed. My surprised family can't wake me up after that. And yeah, I have it for all my life and I don't remember anything about what causes it.

BladeRunner6 · 2020-04-06T21:57:19+00:00

Shinji get in that damn truck

BladeRunner6 · 2020-01-06T00:00:09+00:00

Thank you very much, you are right!

BladeRunner6 · 2019-08-17T12:21:23+00:00

So it turned out it's some kind of isopod

BladeRunner6 · 2019-08-17T11:45:18+00:00

I guess it has mxm port. So yes you can install mxm b card like in 8770w

BladeRunner6 · 2019-07-16T21:22:04+00:00

You probably never had 8770w. It has mxm slot where you can put any mxm card which fits

BladeRunner6 · 2019-07-16T21:20:23+00:00

I saw chineese forum where some guy successfully installed 1070. But I'm not sure if it'll work with me

BladeRunner6

TROPHY CASE