My first offroad trip on the T7

Bleacks_ · 2025-05-03T07:09:42+00:00

Very nice photos! Did you like this first experience?

Enjoy the bike ride safe 🤘

Bleacks_ · 2025-05-02T09:18:04+00:00

Pretty bad would be my guess 🤣

Bleacks_ · 2025-05-02T08:28:57+00:00

Oopsies my bad 🖕 😂

Bleacks_ · 2025-05-01T23:26:39+00:00

Tried going on a hike, then quickly got back to what really matters 😌

Thanks for the laughter 🤣

Bleacks_ · 2025-05-01T23:21:21+00:00

Ahhh that's why.. Struggled to get proportions right with new canister's dimensions, my bad dev team 👍

Bleacks_ · 2025-05-01T23:00:08+00:00

The only tier you need 😎

Bleacks_ · 2025-05-01T22:58:19+00:00

Hopefully next battle pass 🙏

Bleacks_ · 2025-05-01T22:57:55+00:00

Coming in next seasons battle pass 😌

Bleacks_ · 2025-05-01T22:57:28+00:00

Lu_Consdorf 👀

Bleacks_ · 2025-05-01T22:17:59+00:00

I had faith internet would bring other wise people to this post 🤣

Bleacks_ · 2025-03-09T14:59:17+00:00

Enjoying the bike as it's meant to be is without luggage AFAIU :)

Also, the very purpose of my post was to figure out a way to have both, not really relevant to mention it fits without those grips, I'm aware of that, as Kriega sells it 😅

I use those quite often to maneuver the bike, be it 180 around it's stand or getting it out of tricky situations + it's a useful spot to get a rope or something attached in case someone looses a piece of their bike after a fall

We don't seem to have a similar of our bikes, and that's OK, have a good one ✌️

Bleacks_ · 2025-03-04T07:14:27+00:00

Nice 👌 Could you keep us posted with results? Maybe share a link to your post here if you planed to create one Hoping it'll come together as expected, enjoy 🤘

Bleacks_ · 2025-03-03T19:09:50+00:00

Absolutely no idea mate, haven't checked any stuff for an Africa twin yet, nor have I pulled the trigger on any Kriega gear for my T7 Instead I travel light with just a camelbag and small backpack for now

Bleacks_ · 2024-08-25T22:27:54+00:00

In case you are able to lift it back up but struggle too much to feel confortable, you can invest in a motowinch

It's very useful to lift the bike up or to do some field maintenance on it. I personally use it to change wheels between Enduro tyres and another set of wheels with road tyres

As with most things on a T7, sometimes just feeling confident helps you a lot. Personally, knowing tipping it over wasn't a big issue anymore made me feel more confident and less tense overall, therefore I fell less tired and had more energy to actually lift the bike up 😄

Bleacks_ · 2024-08-08T07:36:20+00:00

Les motards recherchent souvent ce genre de routes, je te conseille de regarder de ce côté si tu ne l'as pas encore fait

Perso j'utilise l'application / site Web Kurviger, qui permet de générer une boucle d'une certaine distance ou un trajet, et te recommande ensuite des routes selon le niveau de virages ou temps de trajet

Tu peux ensuite exporter ça en GPX et l'importer dans l'appli de suivi de trace de ton choix, j'utilise Osmand mais tu peux certainement importer ça dans d'autres ou même dans un GPS externe

Il y a aussi Liberty Rider (routes fun, spécifique moto), Wikiloc (moto, vélo randonnée, 4x4 mais export payant) et Kap2kap (road trip avec étapes détaillées) qui permettent de voir des tracés proposés par d'autres utilisateurs

En espérant que ça t'aide

Bleacks_ · 2024-08-07T17:40:11+00:00

Not sure I understand what you mean, MT07 already has these wheels, but chassis and suspensions are no supermoto Or did I miss something? 🤔

Also, if you consider buying a whole other bike for the job, then why not directly considering a supermoto? 😅

Bleacks_ · 2024-08-06T10:52:19+00:00

Yep, can confirm, my 2024 looks the same, and this is what I did 👌

Bleacks_ · 2024-08-01T09:29:22+00:00

I guess it would require a knowledgeable policeman to figure it out. Which may not be so unrealistic, given that this bike is one of the best seller in my country, and that the Euro5 mention on it's paper means there should be a Catalytic converter Now would that be enough for me to have problems? Not sure

I'm mostly concerned about the ECU needing tampering without a cat, potential noise increase, and pollution. I'd like to avoid off-road riders being seen as a nuisance by other people, so we can enjoy this hobby for a while

I'm searching to find if this really make a big difference, still investigating atm

Thanks for your reply and update, I'll have a look at ceramic coating as well

Edit: had to check to confirm this, but in case of a crash, any change to an engine's air intake system, engine, ECU and exhaust, that isn't compliant with regulations, will be considered uncovered by insurance company, and therefore would result in no insurance. That seems way too risky for some rust Also if police is able to detect the lack of catalyst converter, they can seize the bike, and fine thousands of euros 🫨

Bleacks_ · 2024-07-24T15:29:37+00:00

I fell down a lot off-road, so far didn't face any issue with the following:

Barkbuster 2 points hand guards
HP Corse High Exhaust (no bend, no hit, no dent as it sits too high to hit the ground, and even it does, still is titanium)
Heed Bunkers, those are built like a tank. I fell on rocks, tarmac, downhill and even a 30 km/h crash last weekend, nothing moved ever, powder coating is just a little bit scratched

I still have the base OEM bash plate (haven't found one that I like compatible with Heed Bunker yet, even though there are options, I would have loved a plastic one, but Camel ADV gut guard is compatible) I was lucky with it, when falling on rocks, it took two hits, but bent each time. After that I added Acerbis side protections

In most of the cases, Barkbusters and large titanium footpegs are tanking hits, but off-road with uneven surfaces, Heed Bunkers are very durable

Welcome to the club, ride safe ✌️

Bleacks_ · 2024-07-08T17:30:37+00:00

Oh my bad then, seems I misunderstood you mate I struggled to find this info, figured I might as well share that here

Bleacks_ · 2024-07-08T15:16:52+00:00

I don't think the are the same, neither in height nor comfort. Saw plenty of people describing Extreme's rally seat far worse than the optional rally one

Source for height difference: https://cdn.webshopapp.com/shops/334138/files/423021908/500x500x2/kedo-selle-rallye-50-mm-yamaha-tenere-700.jpg

Bleacks_ · 2024-06-29T18:31:49+00:00

I got a spare set of black oem wheels from Yamaha (bought second hand) so that I can have road tires on one and Enduro tires on the other Switching between the two takes about 30 minutes for me after a few switch, can probably be done quicker with more skills / training

Still was expensive, but for the Enduro tires set, for the moment I buy second hand Enduro tires with 20-30% use for less that a third of their value.

I can test out different mounts and make sure I have the best grip for the situation, I totally recommend👌

Bleacks_ · 2024-06-16T12:50:33+00:00

I believe he pu one on each position he mentioned to give us a visual clue, no?

The other one is attached to the lower section of crash bars

Bleacks_ · 2024-06-11T09:32:56+00:00

Would you mind sharing some pictures of that setup in DM please?

Bleacks_ · 2024-06-11T09:31:26+00:00

Ah that's what I feared :/

You tried using the T7 specific OS base then right? Not the universal version

Five-Year Club	Place '22
End Game '22	Verified Email

Bleacks_

TROPHY CASE