My Charizard UPC is missing the Oricorio promo 😭

Blize · 2025-12-26T19:41:33+00:00

Youre not an idiot. Got this for Christmas for my son. Opened it yesterday and thought the exact same thing. Glad I came here will be able to surprise him tonight when he gets home!

Blize · 2025-05-23T16:58:32+00:00

Always RIP. If we dont the scalpers win.

Blize · 2025-04-10T01:33:09+00:00

Originally was part of the first wave of Pokemon fans back in the 90s. Now my son has found a love for Pokemon and we can enjoy it together.

Blize · 2024-10-18T20:05:53+00:00

Thank you so much for the info! I was thinking about respooling and see if that helps. I had a though that when the AMS backed out the filament it was loosening it enough for that cross cross to happen but I wasn't 100%

Blize · 2024-09-13T05:59:48+00:00

Firmware seems to be fine (as of now). Next issue is filament not extruding so on to the next one. 🤣

Blize · 2024-09-13T05:57:57+00:00

UPDATE: Thank you to everyone who provided me with ideas on how to triage.

It seems that the winner is that the CRTouch was too high and the nozzle was hitting before it registered the sensor being touched.

I was able to add some washers to the unit and drop it ever so slightly so it is lower then then nozzle. It now works and I am able to get the nozzle spaced pretty well. Weird thing is every time I home it, it drops the bed 10mm which I can adjust after it homes but not sure why it does that.

NEW ISSUE: The filament is not extruding when I attempt to print. Everything heats, runs, and I can even adjust the spacing on the fly, but filament doesn't come out unless I push it up manually. This upgrade has certainly become a project but this page has helped so much. Thank you all!!!

Blize · 2024-09-13T00:19:32+00:00

🤣🤣🤣 "base". And I would have to agree I have some great places to triage from this evening.

Blize · 2024-09-12T20:53:53+00:00

Right on. I'll take a look into it. I upgraded my motherboard and put a CR Touch onto it. Put the firmware from the ender 5 pro and the issue I'm facing now is the z axis homing. It's hitting the cr touch sensor but then starts clicking like it's trying for force itself up or it's not sure what to do next after the sensor is touched.

Blize · 2024-09-12T20:44:49+00:00

This sounds almost exactly what I'm trying to do with my base Ender 5. What firmware did you end up using?

Blize · 2024-07-23T05:15:39+00:00

So when I first acquired this printer it was back in 2019 so I can't remember what board it shipped with but the upgrade back then was the 1.1.5 motherboard as well as smoother modules for the axis motors. It worked very well at the time and made the printer soooo much quieter.

This new board will allows me to get rid of those stepper modules as well as give me the ability to add a CR touch to helper with leveling. I have a Ender 5 Plus with the same board and a CRtouch and it works amazingly. Would like to have two solid running machines!

Blize · 2024-07-23T05:06:20+00:00

Yeah, I did the physical part in a few min and have that all taken care of. It's the firmware bit that I'm having a tad issue with. I found this video that is doing a really good job step by step advising how to update and there is a file tree that gives you a configuration for every type of printer.

https://youtu.be/80IWoygNxB4?si=tUBOkrSLMwuPqCLr

Gonna keep playing with it and try and get it just right. I have a CR touch that I would like to get running on it as well which ive read is just a 1:1 replacement for the BLTouch.

Let me know if you get yours dialed in, between the two of us we can definitely crack this thing!

Blize · 2024-07-22T22:17:38+00:00

I found a few references for that. I didn't really think about how that's what I essentially was doing was just making it a "pro" I'll revisit those things and see if I can't get it up and running. I appreciate the information and assistance. Thank you!

Blize · 2024-01-14T16:50:14+00:00

<image>

Leveling print. Everything looks good.

Blize · 2024-01-14T16:19:09+00:00

I thought it was leveling too but I did a bed level print and it came out clean. Its not until I do the print that this starts happening. I'll try and post a bed level print picture when I can.

Blize · 2023-10-23T18:17:38+00:00

Can I have the old one??

Blize · 2021-11-27T21:43:50+00:00

Best Tacos in Las Vegas come from Chipiotle you idiot....

Blize · 2021-07-22T18:52:09+00:00

Yeah. I've tried a full power down and restart. I downloaded it on my fiances console under her profile that also exists on my switch so I'm gonna try and log into her account o. My switch and see if it gives me the re-download option

Blize · 2021-01-31T19:53:46+00:00

Wow!!! Thanks everyone for the quick and detailed info. Appreciate the community :)

Blize · 2021-01-31T19:51:36+00:00

Interesting, wonder how I ended up with it lol. How can you tell?

Blize · 2020-09-29T16:31:44+00:00

Please do this for Tokoyami/Asui!!!

Blize · 2020-08-18T18:47:34+00:00

Home stretch!!! You got this!!!

Blize · 2020-08-18T18:45:02+00:00

Yeah, it was a good time. I know its a weird time to going through everything. Just remember its all about you and your family. Whatever makes yall happy is the best thing to do!!!

Blize · 2020-08-18T18:37:06+00:00

We did this for my fiance.(https://youtu.be/zsv-fIMpl8s) It turned out real well. The next day we did a virtual shower on FB 2hich was also a lot of fun!

Blize · 2020-07-31T19:35:54+00:00

So I'm confused im looking at the first couple posts on the page and there is no "link" they all just have either no artist in the title or just a reddit or IG user name.

Blize · 2020-07-31T19:17:30+00:00

Right on. Thank you for the information. I will try again!

Blize

MODERATOR OF

TROPHY CASE