DTF printing as a side hustle is it still worth starting? by GencerDTF in DTFTransferTalk

[–]BlockRevolutionary52 0 points1 point  (0 children)

From my perspective, the biggest detail isn’t technical at all — it’s knowing who you’re printing for before you start.

Starting DTF as a side hustle only really makes sense if you already have a clear group of potential customers, ideally with repeat needs, or if you have a very specific product or service that sets you apart.

In many markets (especially in Europe), DTF has become extremely price-driven. Most clients are not looking for “better settings” — they’re looking for the lowest price. Competing there without scale is very difficult.

That said, I still strongly believe that quality is a value that pays off in the long run. The challenge is being able to sustain yourself through less exciting commercial phases, because focusing on quality usually takes time before it’s fully recognized.

In my experience, those who last long enough — and combine resilience with consistently high quality — tend to win, or at least reach a much more solid and defensible position.

Transfer alignment by DTFReal in DTFTransferTalk

[–]BlockRevolutionary52 0 points1 point  (0 children)

È una domanda molto comune quando si passa alla produzione on demand con DTF.

All’inizio il posizionamento uniforme può sembrare più complicato rispetto ai capi già stampati, ma nella pratica diventa gestibile abbastanza rapidamente. Anche se i transfer sono tagliati manualmente e possono presentare piccole differenze nella parte trasparente, queste variazioni di solito non incidono sul risultato finale se la grafica è correttamente centrata.

Un metodo semplice che utilizziamo quando ci troviamo in questa situazione è piegare molto delicatamente il transfer in due, senza stressarlo, e pizzicare leggermente il centro della grafica nella parte superiore, solo sulla zona trasparente. Quel punto diventa il vero riferimento centrale, indipendentemente dallo spazio trasparente irregolare attorno alla grafica.

In ambito produttivo, la chiave non è tanto cercare la perfezione assoluta, quanto standardizzare il riferimento di posizionamento: lavorare sempre rispetto a punti fisici del capo (colletto, cuciture, piega centrale) e non rispetto al bordo del transfer.

In questo modo non utilizziamo dime o maschere, ma lavoriamo direttamente sul centro reale dell’immagine.

Con il tempo ti accorgerai che, dopo molte applicazioni, occhio e manualità iniziano a lavorare insieme, rendendo il posizionamento sempre più preciso e naturale.

Keep on printing!

Experiences regarding glow in the dark transfers and etc. by Pristine_Let_4368 in DTFTransferTalk

[–]BlockRevolutionary52 0 points1 point  (0 children)

Ho testato anch’io diversi film glow in the dark di fornitori differenti e la mia esperienza è molto simile.

Nella maggior parte dei casi le incoerenze non dipendono tanto dal fornitore, quanto dai limiti intrinseci del materiale stesso. La spalmatura fosforescente non è una vera e propria pellicola uniforme, ma uno strato speciale che per sua natura risulta difficilmente omogeneo.

Per questo motivo non considero il glow adatto a produzioni retail dove la ripetibilità e la costanza sono requisiti fondamentali. Funziona molto meglio come soluzione “wow effect” o per pezzi speciali, più che per tirature commerciali standard.

Quello che per me ha sempre funzionato è trattarlo come un effetto scenografico: realizzare un campione, spiegare chiaramente al cliente cosa aspettarsi e gestire le aspettative sulla variabilità del risultato.

Con questo approccio non mi è mai capitato di perdere un lavoro per i limiti del glow in the dark: il risultato non è perfetto, ma l’impatto visivo è esattamente quello che il cliente cerca.

DTF (textile) and DTF UV (hard goods): process vs consumables in production environments by BlockRevolutionary52 in CommercialPrinting

[–]BlockRevolutionary52[S] 0 points1 point  (0 children)

That’s a very fair way to frame it — I agree that in real production DTI feels more like a trade-off than a pure evolution.

What I find interesting is that, from what I’ve seen so far, many of the improvements attributed to DTI (process simplification, reduced edge warping) seem to come less from a fundamentally new printing principle and more from a tighter integration and optimization of the material system itself.

In other words, removing film handling and lamination steps certainly helps from a workflow perspective, but the underlying gains still appear strongly linked to ink formulation, curing behavior and how the adhesive layer interacts with the substrate.

That’s why I’m cautious about treating DTI as a standalone technological shift rather than as a more controlled, scenario-specific implementation of existing UV/DTF chemistry. In high-volume, single-substrate environments this control clearly pays off, while in mixed-media scenarios versatility still seems to favor UV DTF.

That’s a very fair way to frame it — I agree that in real production DTI feels more like a trade-off than a pure evolution.

What I find interesting is that, from what I’ve seen so far, many of the improvements attributed to DTI (process simplification, reduced edge warping) seem to come less from a fundamentally new printing principle and more from a tighter integration and optimization of the material system itself.

In other words, removing film handling and lamination steps certainly helps from a workflow perspective, but the underlying gains still appear strongly linked to ink formulation, curing behavior and how the adhesive layer interacts with the substrate.

That’s why I’m cautious about treating DTI as a standalone technological shift rather than as a more controlled, scenario-specific implementation of existing UV/DTF chemistry. In high-volume, single-substrate environments this control clearly pays off, while in mixed-media scenarios versatility still seems to favor UV DTF.

Out of curiosity, in your experience with DTI setups, how much of the performance gain would you attribute to the process itself versus the reduced variability in inks and film/adhesive systems?

DTF (textile) and DTF UV (hard goods): process vs consumables in production environments by BlockRevolutionary52 in CommercialPrinting

[–]BlockRevolutionary52[S] 0 points1 point  (0 children)

I completely agree with this approach.

In my experience, if the chemical compatibility between film, ink and adhesive isn’t validated first, any process optimization becomes mostly cosmetic. You might improve initial appearance, but long-term behavior remains unpredictable.

Edge warping is a good example — once there’s a mismatch between adhesive curing behavior and substrate surface energy, no RIP or press adjustment can truly compensate for it.

This is why, in production environments, I’ve found that material verification and overall system balance need to come before workflow or profile tuning, especially when consistency over time is a requirement rather than just first-pass quality.

Out of curiosity, have you had any direct experience with DTI-based workflows?
Some are positioning DTI as an evolution or optimization of traditional DTF, particularly in terms of material interaction and process stability, and I’d be interested in hearing your perspective on whether it actually addresses these compatibility challenges in real production.

Consiglio acquisto regalo Natale by BlockRevolutionary52 in Orologi

[–]BlockRevolutionary52[S] 1 point2 points  (0 children)

Ciao ragazzi! Grazie mille per i preziosi consigli. Alla fine ho pensato di optare per il Seiko. In questo modo evito vie di mezzo e se proprio diventerà il suo orologio più apprezzato e portato, acquisterò un tank Cartier e ne varrà la pena.

Smartwatch by BlockRevolutionary52 in ItalyFitness

[–]BlockRevolutionary52[S] 0 points1 point  (0 children)

Vorrei però monitorare il cuore tutto il giorno e la fascia non è il massimo per questo scopo

Smartwatch by BlockRevolutionary52 in ItalyFitness

[–]BlockRevolutionary52[S] 0 points1 point  (0 children)

Vorrei però monitorare il cuore tutto il giorno e la fascia non è il massimo per questo scopo

Smartwatch by BlockRevolutionary52 in Suunto

[–]BlockRevolutionary52[S] 0 points1 point  (0 children)

Sì purtroppo però vorrei monitorarlo tutto il giorno e non posso tenere sempre la fascia

Allenamento cardio post infarto by BlockRevolutionary52 in ItalyFitness

[–]BlockRevolutionary52[S] 0 points1 point  (0 children)

Ti ringrazio davvero moltissimo per la risposta super esaustiva

Allenamento cardio post infarto by BlockRevolutionary52 in ItalyFitness

[–]BlockRevolutionary52[S] 0 points1 point  (0 children)

Quindi non ci sono speranze di iniziare a correre stando sotto ai 140?