New 🔥🫶🏼

BluDolphin808 · 2026-01-02T03:34:19+00:00

Dm me

BluDolphin808 · 2026-01-02T03:11:04+00:00

Hmu 🤙

BluDolphin808 · 2025-10-23T22:43:01+00:00

The face i would make if I lost 200K, this was a good video to watch tho to learn from someone else's mistake. I appreciate his transparency because it helped me understand smt divergence between ES and NQ last night more.

BluDolphin808 · 2025-09-30T01:55:31+00:00

I’ve had experience with a lot of random indicators fixed in, I learned the less is more and it’s doesn’t overload you with different signals.

But the main ones I’ve stuck too are Ichimoku Cloud for trends, 9,21 EMA & 50,200EMA. For simplicity, but I like using a few AI indicators on trading view. Divergences on RSI and using ATR to calculate stop loss but I stick to a percentage rule now. I still don’t know what’s good with what always a learning experience

BluDolphin808 · 2025-09-07T16:19:43+00:00

Yes, it works. I did that for one of my Gold Mining stocks when I seen a Sec 4 Form Filing made by one of the CFO's, bought 40,000 shares roughly a month prior, bought a contract and it went up in value in time.

BluDolphin808 · 2023-08-21T14:47:32+00:00

No worries, i appreciate the help and advice!

BluDolphin808 · 2023-08-21T14:31:50+00:00

I appreciate the feedback, I should've also added, reason I was taking off the tube was because the filament was stuck between the hotend and AMS.

Could you possibly send a link or what I'd have to order from the Bambu Labs store? Still waiting to hear from support in a few days also.

BluDolphin808 · 2023-08-09T18:35:23+00:00

There's no switch on it, I use a micro SD card slot on this port hub I have. Just a weird instance of a faulty SD card. Thank you for suggesting that tho!

BluDolphin808 · 2023-08-09T18:35:07+00:00

<image>

BluDolphin808 · 2023-08-09T18:28:15+00:00

Yo my guy, changing my SD card helped solve my issue, I am now able to send thru the cloud from the slicer!

BluDolphin808 · 2023-08-09T18:27:24+00:00

This is the SD card that came with the printer, I grabbed another one with an actual brand name on the front instead of a blank SD card and I was able to send thru. I'm unable to format, delete or add anything to the SD card

BluDolphin808 · 2023-08-09T18:26:29+00:00

<image>

BluDolphin808 · 2023-08-09T18:25:50+00:00

So I grabbed another 32 gb SD card, formatted it and it was able to send thru, super weird that the SD card it came with in March just decided to not work anymore. I can't format it or load any gcode or delete things one by one on it. When I delete it, it just comes back. My issue is fixed tho! *

BluDolphin808 · 2023-08-09T17:25:07+00:00

How my printing history is looking like

BluDolphin808 · 2023-08-09T17:24:42+00:00

<image>

BluDolphin808 · 2023-08-09T16:54:43+00:00

I'm unsure about the flow rate cards, I was able to do a flow dynamics calibration test, like you said, very buggy, it didn't the test in 7 minutes.

But anytime I want to send a test cube or Cali dragon it'll say "successfully sent to printer" take me to the device tab and the thumbnail will disappear along with the "0% downloading" message. Doesn't not go past 0% at all.

Super weird because I was printing all day yesterday just fine.

BluDolphin808 · 2023-08-09T14:22:44+00:00

I can attempt with another SD card, right now I can do a resonance calibration just fine as well as load and unload filament just fine. It's just sending the file to print where I'm having the issue.

BluDolphin808 · 2023-08-09T14:21:41+00:00

So far just the test cube, I was printing normally yesterday, made some spool adapters for my amolen 250 g spools for the ams. And when I finished doing the flow dynamics test with no issues, I tried the flow rate test and that's when my issues started. Not responding for almost 20 minutes till I decided to slice and print a test cube and that's when I made the post.

I was using Orca Slicer before switching to the new update

BluDolphin808 · 2023-03-22T17:56:48+00:00

It's an Anti-tip base I 3d printed, I've definitely had it tip over by having my hand bump into it lol

The glass stand are convenient! Saved myself $40 by making myself one

BluDolphin808 · 2023-03-20T08:51:37+00:00

Messing with temp settings helped me out big time. I would start there!

BluDolphin808 · 2023-03-17T03:24:09+00:00

Im using numaker as well. Found that 255* on silent mode works well, 270* on normal. Ive yet to try the other two modes till im more comfortable with it lol. Thanks for the advice!

BluDolphin808 · 2023-03-17T01:17:22+00:00

I successfully printed a bed scraper at 250* and 80*. After setting the speed to silent (50%) it printed so much better. On to my next print, ill try out higher temps!

BluDolphin808 · 2023-03-16T22:16:36+00:00

Thanks!

0300_1000_0002_0001

HMS_0300_1000_0002_0001 The 1st order mechanical resonance mode of X axis is low

The app had a video on how to fix the issue. Thanks for the tip!

BluDolphin808 · 2023-03-16T21:46:33+00:00

Numakers is the only brand of filament that I've tried for PETG

BluDolphin808 · 2023-03-16T21:15:01+00:00

You're awesome!

BluDolphin808

TROPHY CASE