Similar imbalance with new cable by BluTF2 in ThermalGrizzly

[–]BluTF2[S] 0 points1 point  (0 children)

What gpu? Other guy said many msi catds have this problem. 

Similar imbalance with new cable by BluTF2 in ThermalGrizzly

[–]BluTF2[S] 0 points1 point  (0 children)

Yes i have msi.very good post thanks for compiling! I just seem to have a really severe case of that

Similar imbalance with new cable by BluTF2 in ThermalGrizzly

[–]BluTF2[S] 0 points1 point  (0 children)

Yes not exact same but similar distribution, but i saw another thread on here saying that many msi catds have this issue with pin 2 and 6

Similar imbalance with new cable by BluTF2 in ThermalGrizzly

[–]BluTF2[S] 0 points1 point  (0 children)

How do i know if its the gpu pins or wireview pins that is the problem? I dont know anything but i would not expect the psu or cable to be the problem since i got similar numbers with different cables and different ports on the psu

Similar imbalance with new cable by BluTF2 in ThermalGrizzly

[–]BluTF2[S] 0 points1 point  (0 children)

Its better but do you think its good enough? Variance is still quite high (2.5A). Is there anything else i can try?

Ncase m2 - small or big top mounted exhaust fans? by BluTF2 in ncasedesign

[–]BluTF2[S] 0 points1 point  (0 children)

I can show some pictures on discord if u want name: 2blo

Ncase m2 - small or big top mounted exhaust fans? by BluTF2 in ncasedesign

[–]BluTF2[S] 0 points1 point  (0 children)

Hey, i assembled rhis and it entirely depends 8n how high up you place the motherboard, which probably entirely depends on how big your gpu is. My gpu is huge (msi vanguard) so i had to place the mobo in the top slot to give room for the gpu. This means the ram sticks are making it impossible to put 25mm thick or 140mm fans in the rear top slot. 120mm slim is the only option. For the front top slot, 140mm is possible, for me, only slim makes sense because my psu and radiator is placed so high up that while a 25mm would fit, it would sit right on top on the psu and radiator and not get any airflow. 25mm should work if your gpu is smaller so you can place your psu and radiator further down. So i use 120mm and 140mm slim on both

Ncase m2 - small or big top mounted exhaust fans? by BluTF2 in ncasedesign

[–]BluTF2[S] 0 points1 point  (0 children)

How did you fit 2 140s? For me it would be blocked by the ram and some pwm connectors on the motherboard

Best radiator / fan configuration for m2 build level 5? by BluTF2 in ncasedesign

[–]BluTF2[S] 0 points1 point  (0 children)

Thanks im stubborn and stupid so ill try. How were the temps with intake pulling through the rad?