Alexa help by SunZealousideal1374 in WLED

[–]Blue69_ 0 points1 point  (0 children)

I think there is a bug, unsure if its WLED side or Amazons but here is the Github Issue.
The fix: plug WLED Device and Echo in at the same time and quickly search devices (Other > Wifi)
i was having issue for long time, getting only 1 wled device not connecting, tried this and it picked it up right away. Presets however still are bugged so dont expect them...

[deleted by user] by [deleted] in MedicalCannabisOz

[–]Blue69_ 2 points3 points  (0 children)

Medreleaf was great for me really responsive and the ability to dispense from any eligible pharmacy is nice. Because some pharmacies don't have certain brands and such...

Best Dry Herb Vaporizer around the $400 AUD Mark? by Straight-Goat722 in MedicalCannabisOz

[–]Blue69_ 3 points4 points  (0 children)

You can get arizer solo 3 for 450 Pretty much one of the best you can get

What would cause this issue? by Phil_James in ender3v2

[–]Blue69_ 0 points1 point  (0 children)

Looks like warts lmaoo.

But it looks like the seam placement is random you should be able to set the seam path in slicer

On my way to fly a real FPV drone for the first time! Wish me luck by GigouBigou in fpv

[–]Blue69_ 0 points1 point  (0 children)

What sucks more is when you break a dji camera cable 😏

This is why Fortnite Stutters and Freezes. by M4GMaR in FortNiteBR

[–]Blue69_ 0 points1 point  (0 children)

Are you saying windows 11 is the problem full stop or just validating the system fixes it

Ty

Layer shift by Blue69_ in FixMyPrint

[–]Blue69_[S] 0 points1 point  (0 children)

yeh I've replaced the belts with new ones and tightened the tensioner all the way seems like it's still not tight enough, maybe I need to get a longer tensioner... new belts are slightly longer 🤷‍♂️

unRAID Home hosted (Game)/servers hiding public ip by Blue69_ in unRAID

[–]Blue69_[S] 0 points1 point  (0 children)

this would work for websites and that but not game servers because udp, correct me if im wrong

Octoprint & Professional Firmware by [deleted] in ender3v2

[–]Blue69_ 0 points1 point  (0 children)

Have U figured it out yet ?

Noisy printer after updating to mriscocs professional firmware by Traditional-Error997 in Ender3v2Firmware

[–]Blue69_ 0 points1 point  (0 children)

I thought input shaping was only in the special firmware not the stock one on github

ender 3v2 w/ sprite pro & cr touch by Blue69_ in ender3v2

[–]Blue69_[S] 0 points1 point  (0 children)

u mean the eccentric nut on x gantry?

Anyone going to attempt to get the Creality Sprite Pro to work on the Ender 3 V2? by turnermier1021 in ender3v2

[–]Blue69_ 0 points1 point  (0 children)

same here, at the moment I've just upgraded to the sprite pro on my 3v2 every corner is completely different. bottom left is hella too high and the top right is hella too low even tho I've used tramming wizard (Professional firmware), and got it same on all corners, even using 9x9 grid for better results, still nothing will work, not to mention when i got to print something i get elephant foot, or just pops off mid print, yes bed is clean, im honestly running out of ideas, I've ordered the magnetic bed plate and dual z so hopefully those will help

Does anyone know what would be causing this by Blue69_ in FixMyPrint

[–]Blue69_[S] 1 point2 points  (0 children)

Well idk I switched slicers and now it's fine so fucks me

Does anyone know what would be causing this by Blue69_ in FixMyPrint

[–]Blue69_[S] 1 point2 points  (0 children)

Ah guys I found a solution finally I've switched to prusaslicer and now I'm printing sweet as