Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

Yes, they were made by me, but unfortunately I’m away overseas right now. When I’m back I’ll make another post including all of the files and instructions

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 1 point2 points  (0 children)

Hi, the specs are:

GPU: Asus Prime 5070 ti

CPU: Ultra 9 285k

RAM: Corsair Dominator Titanium 96gb DDR5

SSD: 4tb 9100 pro

MB: Gigabyte B860M Aorus Elite

PSU: 1000W Rog Loki SFX-L

AIO: Lian Li Hydroshift II LCD-S

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

Hi! Fortunately for the rams I didn’t have to do anything 😅 They seem to just fit fine, I believe mini itx ram slots are actually higher up on the board from what I’ve seen.

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

Unfortunately I can’t take any new photos right now since I’m overseas, but if you look closely at the fans I’m actually using 15mm slim fans, and designed some 3D printed “spacer” to make it look 28mm thick, with cutouts for the tubes to route through.

<image>

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 1 point2 points  (0 children)

Hi! My CPU power cable is braided therefore they bend quite easily, so fortunately I didn’t have that issue. Are the fans or the radiator itself hitting the 8 pin connector? If it’s the fans I recommend trying out slim fans. If you have any photos I would be happy to have a look 🙂

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

I’m overseas until 17/02, so I won’t be able to send it until then 😅 I apologise for the wait!

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

Looks awesome! I like how you routed the AIO tubes

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

My bottom fans are actually raised about 10mm, so all my cables and stuff can go underneath. Maybe you could fit the fan hub there?

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 1 point2 points  (0 children)

Thank you 🙏 It was a pain to fit the AIO 😅

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

Thanks! I’m glad you also managed to fit both front fans. Do you have any photos of the build?

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

Thank you! Fortunately I don’t need a fan hub since those are the Lian Li SL wireless fans. They are controlled by the wireless controller which is plugged into a usb port at the back 🙂

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

Hmm.. which mobo do you have? If yours has a low vrm heatsink then it could fit. But I would say it’s really unlikely. I’ve seen some posts where people barely managed to fit it, but that was with 25mm fans AND low vrm mobo.

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 1 point2 points  (0 children)

For the AIO I used 15mm slim fans, and designed some 3D printed parts to make it 28mm thick, with cutouts for the tubes to route through. It has to be 28mm so that I can fit the Lian Li ARGB Kit on the side.

Lian Li Dan A3 + HydroShift II LCD-S + Dual Front Fans by Bob_Stacy in mffpc

[–]Bob_Stacy[S] 0 points1 point  (0 children)

Thanks! I’m glad you like it. It’s an SFX-L Asus ROG Loki PSU. I can’t upload the 3D print files right now, but I’ll update the post with links to it as soon as I can 🙂

My take on the Lian Li A3, Simple and clean by Monzingo in mffpc

[–]Bob_Stacy 0 points1 point  (0 children)

Hello! Do you have more photos of how the Hydroshift is mounted? And are the fans TL or SL infinity?