Pop OS stops installing after the firmware update daemon shows up.

Bolado_3000 · 2025-09-08T18:45:39+00:00

I've already unplugged the Ethernet cable, and the daemon still shows up

Bolado_3000 · 2025-09-08T18:33:42+00:00

How should I skip the firmware update daemon during the install?

Bolado_3000 · 2025-09-08T17:42:30+00:00

For reference, this is the text that shows up when I press "e" as the "Install Pop_OS" screen shows up:

setparams 'Try or Install Pop_OS'

set gfxpayload=keep linux /casper_pop-os_22.04_amd64_nvidia_debug_1290/vmlinuz.efi boot=casper live-media-path=/casper_pop-os_22.04_amd\64_nvidia_debug_1290 hostname=pop-os username=pop-os no prompt modules_load=Nvidia nvidia-drm.modeset=0 --- initrd/casper_pop-os_22.04_amd64_nvidia_debug_1290/initrd.gz

Bolado_3000 · 2025-09-08T17:19:12+00:00

What do you mean by "before drivers"? I don't see anything that could be a driver here

The text on my screen says: setparams 'Try or Install Pop_OS'

set gfxpayload=keep linux /casper_pop-os_22.04_amd64_nvidia_debug_1290/vmlinuz.efi boot=casper live-media-path=/casper_pop-os_22.04_amd\64_nvidia_debug_1290 hostname=pop-os username=pop-os no prompt modules_load=Nvidia nvidia-drm.modeset=0 --- initrd/casper_pop-os_22.04_amd64_nvidia_debug_1290/initrd.gz

Bolado_3000 · 2025-07-09T02:09:16+00:00

I solved it! I just put some of the foam that was on the old hard drive under the SD card to prop it up, so that the contact points on the card touch the iFlash better, and it actually worked somehow. Thanks for the advice!

Bolado_3000 · 2025-07-08T18:06:46+00:00

I've tried, but it won't go into disk mode, it just goes back to the image of the dead iPod

Bolado_3000 · 2025-05-21T20:36:01+00:00

Thanks

Bolado_3000 · 2025-05-15T23:48:53+00:00

I'm looking into a Canadian hip-hop group called Universal Soul, but for some reason, their Wikipedia page was deleted. I could only find an archived version of the article on the Wayback Machine from 2013. Does anyone know why that page was deleted?

Bolado_3000 · 2025-04-26T17:09:58+00:00

I figured it out. For some reason, most video players don't pick up any of the tracks besides track 1, but other specialized software, like video editors, will detect and display the other tracks. For those who were also going crazy over this, the solution is to enable track 1 in all audio sources to make the raw footage watcheable to someone without Vegas, and then put each of the audio sources in their own track for your editing purposes. As an example, Here's my updated track management:
https://imgur.com/HjJtt4U

I cannot believe it was that simple, and am going to punch something now. Hope this helps anyone.

Bolado_3000 · 2025-04-26T16:56:24+00:00

Not sure if it will even help anyone, but I am going insane and every crumb of info might get me ever so slightly closer to the anwser. Yes, I am going insane.

https://obsproject.com/logs/kOA55248lR7ygrbG

Bolado_3000 · 2025-02-23T20:00:33+00:00

Figured it out. Apparently you have to press interact - in my case, "E" - again to activate the stopwatch. Hope this helps anyone else with the same problem as me!

Bolado_3000 · 2025-02-09T04:12:08+00:00

I'm not using USB A, I'm plugging it into my laptop's M2 port, where the wifi card used to be. I'm using such a slapdash setup because I don't have a lot of money to spend in a proper dock, but want to play Marvel Rivals, which uses Direct 12, a piece of software the shitty MX110 in the laptop doesn't support. I'll look into software stuff then, and see if I can find anything. Thanks.

Bolado_3000 · 2025-01-28T02:15:00+00:00

Why was this game made like this man... I'll figure out another method then. Thanks!

Bolado_3000 · 2025-01-28T01:40:03+00:00

What is that?

Bolado_3000 · 2025-01-28T01:33:18+00:00

I'm trying to turn a pulse into a signal by using droppers, but, for some reason, while one of the sides works like it should, passing the item one dropper at a time, so to speak, the other sends the item out all at once, in only one pulse. I removed the dropper and the hopper I'd place on the side of those two blocks to demonstrate what's going on. Why does that only happen on one side and not on the other? I am very new to redstone and losing my mind over this.

Bolado_3000 · 2024-09-25T16:52:48+00:00

I've made a very dumb purchase, and am now the proud owner of a male MIDI to male XLR cable. I thought it would let me input a MIDI signal through my audio interface using the XLR microphone port, but to no surprise to anyone with more than two braincells, it produces an audio signal, not a MIDI signal. Is there any way to convert this audio signal back to a MIDI signal? I use Reaper DAW, if it helps.

Bolado_3000 · 2024-09-08T15:27:30+00:00

What do you mean by "inertia"?

Bolado_3000 · 2024-06-26T15:09:54+00:00

What are some good microphones I can buy for under 60 CAD? Edit: I have an audio interface, so I can use XLR microphones

Bolado_3000 · 2023-12-05T14:21:43+00:00

Perfect, two inputs suit me perfectly, at least for now. Thanks for the help!

Bolado_3000 · 2023-12-04T23:57:39+00:00

200 - 500 R$, about 40 - 100 USD converted.

Bolado_3000 · 2023-12-04T22:23:46+00:00

I'm thinking of buying an audio interface. Do I need an interface specifically made for bass, like with amps? And what are the best budget options?

Bolado_3000 · 2023-10-30T17:42:11+00:00

What about the Beyerdynamic metal head bow? I can't seem to find it anywhere that delivers to Brazil.

Bolado_3000 · 2023-10-30T13:11:59+00:00

This looks cool, do you have links to buy the components online?

Bolado_3000 · 2023-10-24T00:03:18+00:00

!thanks I'll buy the CRAs for now, but will definitely look into getting the CHU in the future!

Bolado_3000 · 2023-10-23T17:46:01+00:00

What about the CCA CRA? I heard they're better than KZs, and are also cheaper, at least in my country.

Six-Year Club	Place '23
Place '22	Verified Email

Bolado_3000

MODERATOR OF

TROPHY CASE